Institution · 3D Systems (Belgium)
Most cited papers from 3D Systems (Belgium)
What are the most cited papers from 3D Systems (Belgium)?
The most cited paper from 3D Systems (Belgium) is "Additively manufactured metallic porous biomaterials based on minimal surfaces: A unique combination of topological, mechanical, and mass transport properties" (F.S.L. Bobbert, Karel Lietaert, Ali Akbar Eftekhari et al., 2017), with 870 citations. Next come "Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures" (470) and "Additively manufactured porous tantalum implants" (422).
Showing 50 of 80 papers. Every paper is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Additively manufactured metallic porous biomaterials based on minimal surfaces: A unique combination of topological, mechanical, and mass transport properties F.S.L. Bobbert, Karel Lietaert, Ali Akbar Eftekhari et al. · Acta Biomaterialia | 16 Feb 2017 | 870 |
| 2 | Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures Ruben Wauthlé, Bey Vrancken, Britt Beynaerts et al. · Additive manufacturing | 24 Dec 2014 | 470 |
| 3 | Additively manufactured porous tantalum implants Ruben Wauthlé, Johan van der Stok, Saber Amin Yavari et al. · Acta Biomaterialia | 11 Dec 2014 | 422 |
| 4 | Improving the fatigue performance of porous metallic biomaterials produced by Selective Laser Melting Brecht Van Hooreweder, Yanni Apers, Karel Lietaert et al. · Acta Biomaterialia | 8 Oct 2016 | 323 |
| 5 | Additively manufactured biodegradable porous iron Yageng Li, Holger Jahr, Karel Lietaert et al. · Acta Biomaterialia | 5 Jul 2018 | 300 |
| 6 | Selective laser melting of tungsten and tungsten alloys Aljaž Ivekovič, Neda Omidvari, Bey Vrancken et al. · International Journal of Refractory Metals and Hard Materials | 11 Dec 2017 | 247 |
| 7 | Unravelling the multi-scale structure–property relationship of laser powder bed fusion processed and heat-treated AlSi10Mg Pierre Van Cauwenbergh, Vahid Samaee, Lore Thijs et al. · Scientific Reports | 19 Mar 2021 | 219 |
| 8 | Fatigue performance of additively manufactured meta-biomaterials: The effects of topology and material type Seyed Mohammad Ali Ahmadi, Reza Hedayati, Yageng Li et al. · Acta Biomaterialia | 8 Nov 2017 | 208 |
| 9 | Effect of post-treatments on the fatigue behaviour of 316L stainless steel manufactured by laser powder bed fusion Chola Elangeswaran, Antonio Cutolo, Gokula Krishna Muralidharan et al. · International Journal of Fatigue | 4 Feb 2019 | 201 |
| 10 | Additively manufactured functionally graded biodegradable porous iron Yageng Li, Holger Jahr, Prathyusha Pavanram et al. · Acta Biomaterialia | 12 Jul 2019 | 189 |
| 11 | Prediction of lack of fusion porosity in selective laser melting based on melt pool monitoring data Sam Coeck, Manisha Bisht, Jan Plas et al. · Additive manufacturing | 16 Nov 2018 | 173 |
| 12 | Antibacterial and immunogenic behavior of silver coatings on additively manufactured porous titanium Michiel Croes, Sadra Bakhshandeh, Ingmar A. J. van Hengel et al. · Acta Biomaterialia | 27 Sep 2018 | 172 |
| 13 | Additively manufactured biodegradable porous zinc Y. Li, Prathyusha Pavanram, Jie Zhou et al. · Acta Biomaterialia | 28 Oct 2019 | 169 |
| 14 | Revival of pure titanium for dynamically loaded porous implants using additive manufacturing Ruben Wauthlé, Seyed Mohammad Ali Ahmadi, Saber Amin Yavari et al. · Materials Science and Engineering C | 4 May 2015 | 162 |
| 15 | Antibacterial Behavior of Additively Manufactured Porous Titanium with Nanotubular Surfaces Releasing Silver Ions Saber Amin Yavari, Loek D. Loozen, Fernanda L. Paganelli et al. · ACS Applied Materials & Interfaces | 14 Jun 2016 | 157 |
| 16 | Effect of Process Parameters on the Generated Surface Roughness of Down-Facing Surfaces in Selective Laser Melting Amal Charles, Ahmed Elkaseer, Lore Thijs et al. · Applied Sciences | 26 Mar 2019 | 152 |
| 17 | Mechanical performance of auxetic meta-biomaterials Helena M. A. Kolken, Karel Lietaert, T. van der Sloten et al. · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials | 30 Jan 2020 | 139 |
| 18 | Fatigue life of additively manufactured Ti6Al4V scaffolds under tension-tension, tension-compression and compression-compression fatigue load Karel Lietaert, Antonio Cutolo, Dries Boey et al. · Scientific Reports | 15 Mar 2018 | 123 |
| 19 | Isolated and modulated effects of topology and material type on the mechanical properties of additively manufactured porous biomaterials Reza Hedayati, Seyed Mohammad Ali Ahmadi, Karel Lietaert et al. · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials | 4 Jan 2018 | 108 |
| 20 | Fatigue performance of auxetic meta-biomaterials Helena M. A. Kolken, Andres Garcia, Anton du Plessis et al. · Acta Biomaterialia | 9 Mar 2021 | 104 |
| 21 | Corrosion fatigue behavior of additively manufactured biodegradable porous zinc Yageng Li, Wei Li, F.S.L. Bobbert et al. · Acta Biomaterialia | 7 Feb 2020 | 99 |
| 22 | Simultaneous Delivery of Multiple Antibacterial Agents from Additively Manufactured Porous Biomaterials to Fully Eradicate Planktonic and Adherent Staphylococcus aureus S. Bakhshandeh, Zahra Gorgin Karaji, Karel Lietaert et al. · ACS Applied Materials & Interfaces | 11 Jul 2017 | 97 |
| 23 | Bactericidal coating to prevent early and delayed implant-related infections Fatemeh Jahanmard, Michiel Croes, Miguel Dias Castilho et al. · Journal of Controlled Release | 21 Jun 2020 | 96 |
| 24 | Correlation of selective laser melting-melt pool events with the tensile properties of Ti-6Al-4V ELI processed by laser powder bed fusion Manisha Bisht, Nachiketa Ray, Frederik Verbist et al. · Additive manufacturing | 7 May 2018 | 96 |
| 25 | Mechanical properties of diamond lattice Ti–6Al–4V structures produced by laser powder bed fusion: On the effect of the load direction Antonio Cutolo, Bert Engelen, Wim Desmet et al. · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials | 13 Feb 2020 | 93 |
| 26 | Additively manufactured functionally graded biodegradable porous zinc Yageng Li, Prathyusha Pavanram, Jie Zhou et al. · Biomaterials Science | 2020 | 90 |
| 27 | CoCr F75 scaffolds produced by additive manufacturing: Influence of chemical etching on powder removal and mechanical performance Brecht Van Hooreweder, Karel Lietaert, Bram Neirinck et al. · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials | 20 Apr 2017 | 85 |
| 28 | Corrosion fatigue behavior of additively manufactured biodegradable porous iron Yageng Li, Karel Lietaert, Wei Li et al. · Corrosion Science | 15 May 2019 | 84 |
| 29 | Mechanical properties and cytocompatibility of dense and porous Zn produced by laser powder bed fusion for biodegradable implant applications Karel Lietaert, AMIR ABBAS ZADPOOR, Maarten Sonnaert et al. · Acta Biomaterialia | 27 Apr 2020 | 80 |
| 30 | Down-facing surfaces in laser powder bed fusion of Ti6Al4V: Effect of dross formation on dimensional accuracy and surface texture Amal Charles, Ahmed Elkaseer, Umberto Paggi et al. · Additive manufacturing | 29 Jun 2021 | 76 |
| 31 | Microstructural analysis and fatigue crack initiation modelling of additively manufactured 316L after different heat treatments Chola Elangeswaran, Antonio Cutolo, Gokula Krishna Muralidharan et al. · Materials & Design | 10 Jul 2020 | 76 |
| 32 | Effects of applied stress ratio on the fatigue behavior of additively manufactured porous biomaterials under compressive loading Joep de Krijger, Calvin David Rans, Brecht Van Hooreweder et al. · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials | 7 Dec 2016 | 76 |
| 33 | Influence of layer thickness and post-process treatments on the fatigue properties of CoCr scaffolds produced by laser powder bed fusion Antonio Cutolo, Bram Neirinck, Karel Lietaert et al. · Additive manufacturing | 20 Jul 2018 | 73 |
| 34 | Increasing the productivity of laser powder bed fusion: Influence of the hull-bulk strategy on part quality, microstructure and mechanical performance of Ti-6Al-4V Charlotte de Formanoir, Umberto Paggi, Thomas Colebrants et al. · Additive manufacturing | 13 Feb 2020 | 65 |
| 35 | Elucidation of dross formation in laser powder bed fusion at down-facing surfaces: Phenomenon-oriented multiphysics simulation and experimental validation Amal Charles, Mohamad Bayat, Ahmed Elkaseer et al. · Additive manufacturing | 11 Dec 2021 | 60 |
| 36 | Additively manufactured space-filling meta-implants Helena M. A. Kolken, Christa P. de Jonge, T. van der Sloten et al. · Acta Biomaterialia | 21 Feb 2021 | 60 |
| 37 | Mechanisms of fatigue crack initiation and propagation in auxetic meta-biomaterials Helena M. A. Kolken, Andres Garcia, Anton du Plessis et al. · Acta Biomaterialia | 8 Nov 2021 | 56 |
| 38 | Integrative omics analysis of Pseudomonas aeruginosa virus PA5oct highlights the molecular complexity of jumbo phages Cédric Lood, Katarzyna M. Danis-Wlodarczyk, Bob G. Blasdel et al. · Environmental Microbiology | 10 Mar 2020 | 52 |
| 39 | More investigations in capillary fluidics using a drop tower Andrew Wollman, MARK M. WEISLOGEL, Brently Wiles et al. · Experiments in Fluids | 30 Mar 2016 | 52 |
| 40 | Effects of anodizing parameters and heat treatment on nanotopographical features, bioactivity, and cell culture response of additively manufactured porous titanium Saber Amin Yavari, Yoke Chin Chai, A. Böttger et al. · Materials Science and Engineering C | 25 Feb 2015 | 49 |
| 41 | Fatigue and quasi‐static mechanical behavior of bio‐degradable porous biomaterials based on magnesium alloys Reza Hedayati, Seyed Mohammad Ali Ahmadi, Karel Lietaert et al. · Journal of Biomedical Materials Research Part A | 22 Feb 2018 | 45 |
| 42 | Dimensional Errors Due to Overhanging Features in Laser Powder Bed Fusion Parts Made of Ti-6Al-4V Amal Charles, Ahmed Elkaseer, Lore Thijs et al. · Applied Sciences | Apr 2020 | 44 |
| 43 | Galvanostatic Anodizing of Additive Manufactured Al-Si10-Mg Alloy Reynier I. Revilla, Donovan Verkens, Gaëlle Couturiaux et al. · Journal of The Electrochemical Society | 2017 | 43 |
| 44 | Thermo-mechanical modelling of stress relief heat treatments after laser-based powder bed fusion David De Baere, Pierre Van Cauwenbergh, Mohamad Bayat et al. · Additive manufacturing | 12 Jan 2021 | 41 |
| 45 | Predicting fatigue life of metal LPBF components by combining a large fatigue database for different sample conditions with novel simulation strategies Chola Elangeswaran, Antonio Cutolo, Simone Gallas et al. · Additive manufacturing | 20 Dec 2021 | 39 |
| 46 | Fatigue life prediction of a L-PBF component in Ti-6Al-4V using sample data, FE-based simulations and machine learning Antonio Cutolo, Nicolas Lammens, Koen Vanden Boer et al. · International Journal of Fatigue | 27 Sep 2022 | 32 |
| 47 | Additively manufactured metals for medical applications Kim Vanmeensel, Karel Lietaert, Bey Vrancken et al. · Elsevier eBooks | 2018 | 32 |
| 48 | AMD XDNA NPU in Ryzen AI Processors Alejandro Rico, Satyaprakash Pareek, Javier Cabezas et al. · IEEE Micro | 10 Jul 2024 | 27 |
| 49 | Effect of Heat Treatments on Fatigue Properties of Ti–6Al–4V and 316L Produced by Laser Powder Bed Fusion in As-Built Surface Condition Antonio Cutolo, Chola Elangeswaran, Charlotte de Formanoir et al. · The minerals, metals & materials series | 2019 | 27 |
| 50 | Bone Regeneration in Critical-Sized Bone Defects Treated with Additively Manufactured Porous Metallic Biomaterials: The Effects of Inelastic Mechanical Properties Marianne K. E. Koolen, Saber Amin Yavari, Karel Lietaert et al. · Materials | 24 Apr 2020 | 22 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.