Institution · 3D Systems (United States)
Most cited papers from 3D Systems (United States)
What are the most cited papers from 3D Systems (United States)?
The most cited paper from 3D Systems (United States) is "Scientific, technological and economic issues in metal printing and their solutions" (T. DebRoy, Tuhin K Mukherjee, John O. Milewski et al., 2019), with 548 citations. Next come "Rationally designed meta-implants: a combination of auxetic and conventional meta-biomaterials" (377) and "3D printing of liquid metals as fugitive inks for fabrication of 3D microfluidic channels" (204).
Showing 42 of 42 papers. Every paper is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Scientific, technological and economic issues in metal printing and their solutions T. DebRoy, Tuhin K Mukherjee, John O. Milewski et al. · Nature Materials | Jul 2019 | 548 |
| 2 | Rationally designed meta-implants: a combination of auxetic and conventional meta-biomaterials Helena M. A. Kolken, Shahram Janbaz, Sander M. A. Leeflang et al. · Materials Horizons | 18 Oct 2017 | 377 |
| 3 | 3D printing of liquid metals as fugitive inks for fabrication of 3D microfluidic channels Dishit Paresh Parekh, Collin Ladd, Lazar Panich et al. · Lab on a Chip | 2016 | 204 |
| 4 | Surgical planning, manufacturing and implantation of an individualized cervical fusion titanium cage using patient-specific data Uwe Spetzger, Miles Frasca, Stefan König · European Spine Journal | Mar 2016 | 92 |
| 5 | Vacuum-filling of liquid metals for 3D printed RF antennas Vivek T. Bharambe, Dishit Paresh Parekh, Collin Ladd et al. · Additive manufacturing | 13 Oct 2017 | 65 |
| 6 | Accuracy of three-dimensional soft tissue prediction for Le Fort I osteotomy using Dolphin 3D software: a pilot study Cory M. Resnick, Rushil Rajiv Dang, S J Glick et al. · International Journal of Oral and Maxillofacial Surgery | 15 Nov 2016 | 61 |
| 7 | More investigations in capillary fluidics using a drop tower Andrew Wollman, MARK M. WEISLOGEL, Brently Wiles et al. · Experiments in Fluids | 30 Mar 2016 | 52 |
| 8 | Crystallographic education in the 21st century S. Gražulis, Amy A. Narducci Sarjeant, Peter Moeck et al. · Journal of Applied Crystallography | 12 Oct 2015 | 40 |
| 9 | Results of an interlaboratory study on the working curve in vat photopolymerization Thomas J. Kolibaba et al. · Additive manufacturing | Mar 2024 | 38 |
| 10 | 3D printed models of small and large molecules, structures and morphologies of crystals, as well as their anisotropic physical properties Jennifer L. Stone‐Sundberg, Werner Kaminsky, Trevor J. Snyder et al. · Crystal Research and Technology | 5 Mar 2015 | 31 |
| 11 | Liquid-Metal-Filled 3-D Antenna Array Structure With an Integrated Feeding Network Vivek T. Bharambe, Dishit Paresh Parekh, Collin Ladd et al. · IEEE Antennas and Wireless Propagation Letters | 8 Mar 2018 | 27 |
| 12 | On the use of stereolithography for the manufacture of photoelastic models J. D. Curtis, Sumita Hanna, Eann A. Patterson et al. · Experimental Mechanics | Jun 2003 | 27 |
| 13 | Stereolithography 1993: epoxy resins, improved accuracy, and investment casting Paul Jacobs · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 7 Mar 1994 | 26 |
| 14 | A Region Based Method to Automated Design of Multi-Piece Molds with Application to Rapid Tooling Yong Hui Chen, David W. Rosen · Journal of Computing and Information Science in Engineering | Jun 2002 | 24 |
| 15 | One-click preparation of 3D print files (*.stl, *.wrl) from *.cif (crystallographic information framework) data using Cif2VRML Werner Kaminsky, Trevor J. Snyder, Jennifer L. Stone‐Sundberg et al. · Powder Diffraction | Dec 2014 | 23 |
| 16 | Developing a Bio-Inspired Design Repository Using Ontologies Jamal O. Wilson, Patrick Chang, Sungshik Yim et al. · Volume 8: 14th Design for Manufacturing and the Life Cycle Conference; 6th Symposium on International Design and Design Education; 21st International Conference on Design Theory and Methodology, Parts A and B | 2009 | 22 |
| 17 | Microstructure and mechanical properties of laser powder bed fusion Ti-6Al-4V after HIP treatments with varied temperatures and cooling rates Nicholas A. Derimow, Jake T. Benzing, Howie Joress et al. · Materials & Design | 22 Oct 2024 | 21 |
| 18 | Biomechanical behavior of PMMA 3D printed biomimetic scaffolds: Effects of physiologically relevant environment Maryam Tilton, Erik Jacobs, Ryan Overdorff et al. · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials | 7 Dec 2022 | 20 |
| 19 | Flaw Detection in Multi-Laser Powder Bed Fusion Using In Situ Coaxial Multi-Spectral Sensing and Deep Learning Amit Surana, Matthew E. Lynch, Abdalla R. Nassar et al. · Journal of Manufacturing Science and Engineering | 21 Dec 2022 | 14 |
| 20 | Analysis of factors affecting fatigue performance of HIP'd laser-based powder bed fusion Ti–6Al–4V coupons Zackary Snow, Christine Cummings, Edward W. Reutzel et al. · Materials Science and Engineering A | 30 Dec 2022 | 13 |
| 21 | Microstructural effects on the rotating bending fatigue behavior of Ti–6Al–4V produced via laser powder bed fusion with novel heat treatments Nicholas A. Derimow, Jake T. Benzing, David C. Newton et al. · International Journal of Fatigue | 30 Apr 2024 | 9 |
| 22 | Open Access Resources for Crystallography Education in Interdisciplinary College Courses: Crystallographic Databases and 3D Printed Models Peter Moeck, Jennifer L. Stone‐Sundberg, Trevor J. Snyder et al. · MRS Proceedings | 2014 | 9 |
| 23 | Solid state lasers for stereolithography Jouni P. Partanen | Oct 1996 | 8 |
| 24 | Accuracy of orthognathic surgery using 3D computer-assisted surgical simulation Richard Lee, Mithran Suresh Goonewardene, Ajmal Saeed Mian et al. · Australasian Orthodontic Journal | 2018 | 7 |
| 25 | The Digital Thread for Personalized Craniomaxillofacial Surgery Andrew M. Christensen, Katherine A. Weimer, Christopher Beaudreau et al. | 2018 | 7 |
| 26 | 3D Printing in the Context of Science, Technology, Engineering, and Mathematics Education at the College/University Level Peter Moeck, Paul R. DeStefano, Werner Kaminsky et al. | 13 Nov 2020 | 6 |
| 27 | Experimental validation of coarse ridge filters for FLASH proton therapy Lucian Hotoiu, François Vander Stappen, A. W. J. Pin et al. · Medical Physics | Sep 2025 | 4 |
| 28 | Lasers and optics in stereolithography Jouni P. Partanen · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 8 Apr 1996 | 4 |
| 29 | Cytocentric measurement for regenerative medicine Alicia D. Henn, Taci Pereira, Joshua G. Hunsberger et al. · Frontiers in Medical Technology | 27 Apr 2023 | 3 |
| 30 | Virtual Worlds in Healthcare Prabal Khanal, Ashish Gupta, Marshall Smith · Annals of information systems | 10 Dec 2015 | 3 |
| 31 | Enhanced resolution of stereolithography Jouni P. Partanen · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 9 Jan 1997 | 3 |
| 32 | Four-wave-mixing interferometer N. Tang, Jouni P. Partanen · Optics Letters | Aug 1996 | 3 |
| 33 | Accuracy of Patient-Specific Instrument Resections In Vivo in Total Ankle Arthroplasty on Postoperative Weightbearing CT Scan Moawiah S. Mustafa, George Dierking, Justin Ivoc et al. · Foot & Ankle Orthopaedics | Apr 2025 | 2 |
| 34 | Mitigating voids in AM: re-melt and parameter adjustment strategies Christine Cummings, David Jeffrey Corbin, Edward W. Reutzel et al. · The International Journal of Advanced Manufacturing Technology | 26 Dec 2024 | 2 |
| 35 | A Framework for Self-Realizing Process Models for Additive Manufacturing Sungshik Yim, David W. Rosen | 2011 | 2 |
| 36 | Results of an interlaboratory study on the working curve in vat photopolymerization II: Towards a standardized method Thomas J. Kolibaba et al. · Additive manufacturing | Jul 2025 | 1 |
| 37 | Characterizing the Venous Anatomy of Craniopagus Twins Andrew Joshua Kobets, Joseph Fullerton, Robert M. Lober et al. · Neurosurgery | 7 Jul 2025 | 1 |
| 38 | The Effect of Heat Treatment and Build Orientation on the Susceptibility of Laser Powder Bed Fusion Additively Manufactured Alloy 625 to Crevice Corrosion Y. Shorrab, J. J. Blecher, R. S. Lillard · CORROSION | 17 Apr 2024 | 1 |
| 39 | Translation of tissue-engineering innovations requires a connected ecosystem Annie Moisan, David B. Kolesky, Jordan S. Miller et al. · Nature Reviews Bioengineering | 4 Sep 2023 | 1 |
| 40 | Straightforward routes from CIFs to three-dimensional printed crystallographic models Peter Moeck, Paul DeStafano, Izzy Cheung et al. · Acta Crystallographica Section A Foundations and Advances | Dec 2017 | 1 |
| 41 | 3D printing of crystallographic models for interdisciplinary college education Peter Moeck, Werner Kaminsky, Trevor J. Snyder · Acta Crystallographica Section A Foundations and Advances | 5 Aug 2014 | 1 |
| 42 | Using Serious Gaming to Improve the Safety of Central Venous Catheter Placement Daniel Katz, Andrew T. Goldberg, Prabal Khanal et al. · Advances in multimedia and interactive technologies book series | 29 Dec 2016 | 0 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.