Institution · Aerospace & Advanced Composites (Austria)
Most cited papers from Aerospace & Advanced Composites (Austria)
What are the most cited papers from Aerospace & Advanced Composites (Austria)?
The most cited paper from Aerospace & Advanced Composites (Austria) is "Characterization of Slow Pyrolysis Biochars: Effects of Feedstocks and Pyrolysis Temperature on Biochar Properties" (Stefanie Kloss, Franz Zehetner, Alex Dellantonio et al., 2012), with 1,010 citations. Next come "Infrared thermographic techniques for non-destructive damage characterization of carbon fibre reinforced polymers during tensile fatigue testing" (129) and "Production of titanium matrix composites reinforced with SiC particles" (126).
Showing 50 of 82 papers. Every paper is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Characterization of Slow Pyrolysis Biochars: Effects of Feedstocks and Pyrolysis Temperature on Biochar Properties Stefanie Kloss, Franz Zehetner, Alex Dellantonio et al. · Journal of Environmental Quality | 29 Jun 2012 | 1,010 |
| 2 | Infrared thermographic techniques for non-destructive damage characterization of carbon fibre reinforced polymers during tensile fatigue testing Robin Steinberger, T VALADASLEITAO, Elisabeth Ladstätter et al. · International Journal of Fatigue | 19 Apr 2006 | 129 |
| 3 | Production of titanium matrix composites reinforced with SiC particles María Cecilia Poletti, Martin Balog, Thomas H. Schubert et al. · Composites Science and Technology | 31 Mar 2008 | 126 |
| 4 | Sandwich structured ceramic matrix composites with periodic cellular ceramic cores: an active cooled thermal protection for space vehicles Luca Ferrari, Maurizio Barbato, Burkard Esser et al. · Composite Structures | 21 Jul 2016 | 95 |
| 5 | Microcrack characterization in loaded CFRP laminates using quantitative two- and three-dimensional X-ray dark-field imaging Sascha Senck, Michael Scheerer, Vincent Revol et al. · Composites Part A Applied Science and Manufacturing | 25 Sep 2018 | 65 |
| 6 | Joining of ceramic matrix composites to high temperature ceramics for thermal protection systems Christina Jimenez, Konstantina Mergia, Miguel Lagos et al. · Journal of the European Ceramic Society | 26 Oct 2015 | 64 |
| 7 | Additive manufacturing and non-destructive testing of topology-optimised aluminium components Sascha Senck, Michael Happl, Michael Reiter et al. · Nondestructive Testing And Evaluation | 15 Jun 2020 | 63 |
| 8 | Effect of metallic dopants on the microstructure and mechanical properties of TiB2 Zdeněk Chlup, Ľuboš Bača, Martina Halasová et al. · Journal of the European Ceramic Society | 11 Apr 2015 | 60 |
| 9 | Improving mechanical properties of lean Mg–Zn–Ca alloy for absorbable implants via Double Equal Channel Angular Pressing (D-ECAP) Jelena Horky, Krzysztof Bryła, Maciej Krystian et al. · Materials Science and Engineering A | 30 Aug 2021 | 56 |
| 10 | The action of fillers in the enhancement of the tribological performance of epoxy composite coatings Balázs Jakab, Ileana Panaitescu, Norbert Gamsjäger · Polymer Testing | 21 May 2021 | 54 |
| 11 | Innovative Thermal Management Concepts and Material Solutions for Future Space Vehicles Burkard Esser, Jorge Barcena, Markus Kuhn et al. · Journal of Spacecraft and Rockets | 5 Jul 2016 | 54 |
| 12 | Influence of sintering temperature, SiC particle size and Y 2 O 3 addition on the densification, microstructure and oxidation resistance of ZrB 2 –SiC ceramics Zuzana Kováčová, Ľuboš Bača, Erich Neubauer et al. · Journal of the European Ceramic Society | 2 Jan 2016 | 49 |
| 13 | Improved Formability of AA5182 Aluminium Alloy Sheet at Cryogenic Temperatures Nikolay Sotirov, Georg Falkinger, Florian Grabner et al. · Materials Today Proceedings | 2015 | 49 |
| 14 | Glycan structure of a heptose-containing S-layer glycoprotein of Bacillus thermoaerophilus Paul Kosma, Thomas Wugeditsch, Rudolf Christian et al. · Glycobiology | 1995 | 48 |
| 15 | Cryogenic forming behaviour of AW-6016-T4 sheet Manoj Kumar, Nikolay Sotirov, Florian Grabner et al. · Transactions of Nonferrous Metals Society of China | Jun 2017 | 41 |
| 16 | Microstructural changes and strain hardening effects in abrasive contacts at different relative velocities and temperatures H. Rojacz, Grazyna Mozdzen, F. Weigel et al. · Materials Characterization | 3 Jun 2016 | 38 |
| 17 | An Innovative Joint Structure for Brazing Cf/SiC Composite to Titanium Alloy Xanat Zacarias Hernandez, Cristina Jiménez, Konstantina Mergia et al. · Journal of Materials Engineering and Performance | 21 May 2014 | 37 |
| 18 | Novel composite filament usable in low-cost 3D printers for fabrication of complex ceramic shapes Peter Veteška, Zora Hajdúchová, Jozef Feranc et al. · Applied Materials Today | 9 Feb 2021 | 34 |
| 19 | Glycan structure of the S-layer glycoprotein ofBacillus sp. L420-91 Paul Kosma, Christina Neuninger, Rudolf Christian et al. · Glycoconjugate Journal | Feb 1995 | 30 |
| 20 | Liquid-metal-ion source development for space propulsion at ARC Martin Tajmar, Carsten Scharlemann, Angelo Genovese et al. · Ultramicroscopy | Nov 2008 | 29 |
| 21 | Constitutive flow curve approximation of commercial aluminium alloys at low temperatures Robert J. Schneider, Richard J. Grant, Nikolay Sotirov et al. · Materials & Design | 12 Sep 2015 | 27 |
| 22 | Preparation of fully dense boron carbide ceramics by Fused Filament Fabrication (FFF) Mária Vozárová, Erich Neubauer, Ľuboš Bača et al. · Journal of the European Ceramic Society | 14 Dec 2022 | 26 |
| 23 | Vacuum tribology of multi-layer Ti3C2T and Ti3C2T /MoS2 hybrid coatings Guido Boidi, Dario F. Zambrano-Mera, Christian Jogl et al. · Applied Materials Today | 4 Apr 2024 | 25 |
| 24 | High plastically deformed sub-surface tribozones in sliding experiments Ulrike Cihak-Bayr, Grazyna Mozdzen, E. Badisch et al. · Wear | 4 Nov 2013 | 24 |
| 25 | Upconversion luminescence and optical thermometry in Er3+/Yb3+ co-doped CeO2 for space application Ľuboš Bača, Hannes Steiner, Nils Stelzer · Journal of Alloys and Compounds | 6 Oct 2018 | 23 |
| 26 | VLSI Implementation of a Fault-Tolerant Distributed Clock Generation Markus Ferringer, Gottfried Fuchs, Andreas Steininger et al. · Proceedings | Oct 2006 | 23 |
| 27 | Experimental Analysis of Friction and Wear of Self-Lubricating Composites Used for Dry Lubrication of Ball Bearing for Space Applications Guillaume Colas, Aurélien Saulot, Yann Michel et al. · Lubricants | 3 Apr 2021 | 22 |
| 28 | Microstructure evolution and tribological properties of TiB2/Ni–Ta cermets Ľuboš Bača, Zoltán Lenčéš, Christian Jogl et al. · Journal of the European Ceramic Society | 18 Nov 2011 | 22 |
| 29 | Non-Destructive Evaluation of Defects in Polymer Matrix Composites for Aerospace Applications Using X-ray Talbot-Lau Interferometry and Micro CT Sascha Senck, Michael Scheerer, Vincent Revol et al. · 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference | 5 Jan 2017 | 21 |
| 30 | Cold Welding in Hold Down Points of Space Mechanisms Due to Fretting When Omitting Grease Andreas Merstallinger, Roland Holzbauer, Nathan M. Bamsey · Lubricants | 21 Jul 2021 | 20 |
| 31 | Characteristics of sintered calcium deficient hydroxyapatite scaffolds produced by 3D printing Marián Janek, Ida Vašková, Martina Pischová et al. · Journal of the European Ceramic Society | 21 Jan 2024 | 19 |
| 32 | Material-extrusion based additive manufacturing of BaTiO3 ceramics: from filament production to sintered properties Subhadip Bhandari, Peter Veteška, Gaurav Vajpayee et al. · Additive manufacturing | May 2024 | 17 |
| 33 | Towards a More Socially Sustainable Advanced Pilot Training by Integrating Wearable Augmented Reality Devices Birgit Moesl, Harald Schaffernak, Wolfgang Vorraber et al. · Sustainability | 15 Feb 2022 | 16 |
| 34 | Long target droplet polymerase chain reaction with a microfluidic device for high-throughput detection of pathogenic bacteria at clinical sensitivity Johannes R. Peham, Walter Grienauer, Hannes Steiner et al. · Biomedical Microdevices | 26 Jan 2011 | 16 |
| 35 | Monitoring of critical processing steps during the production of high dense 3D alumina parts using Fused Filament Fabrication technology Martina Horváth Orlovská, Miroslav Hain, Michael Kitzmantel et al. · Additive manufacturing | 12 Oct 2021 | 15 |
| 36 | Five-Stage Selection Procedure of Ionic Liquids for Lubrication of Steel–Steel Contacts in Space Mechanisms Nicole Dörr, Andreas Merstallinger, Roland Holzbauer et al. · Tribology Letters | 28 May 2019 | 15 |
| 37 | Hetoroporous heterogeneous ceramics for reusable thermal protection systems Alberto Ortona, Claudio Francesco Badini, Volker Liedtke et al. · Journal of materials research/Pratt's guide to venture capital sources | May 2013 | 15 |
| 38 | Hot shearing processes: Correlation of numerical simulation with real wear phenomena H. Torres, Dieter Horwatitsch, Markus Varga et al. · Tribology International | 17 Feb 2014 | 13 |
| 39 | Deformation and strain hardening of different steels in impact dominated systems H. Rojacz, Grazyna Mozdzen, H. Winkelmann · Materials Characterization | 29 Jan 2014 | 13 |
| 40 | Fault tolerant Four-State Logic by using Self-Healing Cells Thomas Panhofer, Werner Friesenbichler, Martin Delvai | Oct 2008 | 11 |
| 41 | Disposable microfluidic chip for rapid pathogen identification with DNA microarrays Johannes R. Peham, Lisa-Maria Recnik, Walter Grienauer et al. · Microsystem Technologies | 19 Dec 2011 | 11 |
| 42 | Temperature dependent terahertz spectroscopy study of rare earth modified smectites: Probing the structural responses Marián Janek, Michal Čičkan, Róbert Klement et al. · Applied Clay Science | 16 May 2024 | 10 |
| 43 | Laser metal deposition of self-lubricating alloys on selective laser melting maraging tools for the high temperature forming of aluminium H. Torres, Ileana Panaitescu, R. Gangl et al. · Wear | 31 Mar 2023 | 10 |
| 44 | Demisability assessment of space materials Benoit Bonvoisin, M. Meisnar, James A. Merrifield et al. · CEAS Space Journal | 2 May 2022 | 10 |
| 45 | The Hydration of Modern Roman Cements Used for Current Architectural Conservation Christophe Gosselin, Karen Louise Scrivener, Steven B. Feldman et al. · Rilem bookseries | 2012 | 10 |
| 46 | Self passivating behavior of multilayer SiC under simulated atmospheric re-entry conditions Claudio Francesco Badini, Volker Liedtke, Gerhard Euchberger et al. · Journal of the European Ceramic Society | 10 Aug 2012 | 9 |
| 47 | Quantification of surface-near porosity in additively manufactured aluminum brackets using X-ray microcomputed tomography Sascha Senck, Michael Happl, Michael Scheerer et al. · AIAA Scitech 2021 Forum | 4 Jan 2021 | 8 |
| 48 | Cross-linking processes in antimicrobial UV-sol-gel systems initiated by atmospheric pressure plasma Simon Chwatal, M. Stummer, H. Steiner et al. · Thin Solid Films | 18 Nov 2022 | 7 |
| 49 | Continuous impact/abrasion testing: Influence of testing parameters on wear behaviour E. Badisch, Martin Kirchgaßner, Friedrich Franek · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology | 18 Mar 2009 | 7 |
| 50 | A comparison of X-ray attenuation, differential phase, and dark-field contrast imaging for the detection of porosity in carbon fiber reinforced cyanate ester Jonathan Glinz, Bernhard Plank, Josephine Gutekunst et al. · NDT & E International | 15 Jul 2024 | 6 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.