Institution · Alstom (Germany)
Most cited papers from Alstom (Germany)
What are the most cited papers from Alstom (Germany)?
The most cited paper from Alstom (Germany) is "Multicell converters: basic concepts and industry applications" (Thierry A. Meynard, H. Foch, Philippe Thomas et al., 2002), with 559 citations. Next come "Development and validation of a dynamic simulation model for a large coal-fired power plant" (124) and "Update on Vattenfall’s 30 MWth oxyfuel pilot plant in Schwarze Pumpe" (102).
Showing 50 of 94 papers. Every paper is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Multicell converters: basic concepts and industry applications Thierry A. Meynard, H. Foch, Philippe Thomas et al. · IEEE Transactions on Industrial Electronics | Oct 2002 | 559 |
| 2 | Development and validation of a dynamic simulation model for a large coal-fired power plant Ralf Starkloff, Falah Alobaid, Karl Karner et al. · Applied Thermal Engineering | 19 Aug 2015 | 124 |
| 3 | Update on Vattenfall’s 30 MWth oxyfuel pilot plant in Schwarze Pumpe Lars Strömberg, Göran Lindgren, Jürgen Jacoby et al. · Energy Procedia | Feb 2009 | 102 |
| 4 | Coupled simulation of a tangentially hard coal fired 700°C boiler Christian Schuhbauer, Michael Angerer, Hartmut Spliethoff et al. · Fuel | 22 Jan 2014 | 95 |
| 5 | Analysis of a 300 MW variable speed drive for pump-storage plant applications Aurélie Bocquel, Jörg Janning | 2005 | 84 |
| 6 | On Relation Between Fatigue Properties Of Welded Joints, Quality Criteria and Groups in Iso 5817 A. F. Hobbacher, Manfred Kassner · Welding in the World | Nov 2012 | 60 |
| 7 | Influence of Welding Residual Stresses on Fatigue Design of Welded Joints and Components J. Krebs, Manfred Kassner · Welding in the World | Jul 2007 | 46 |
| 8 | Residual current compensation (RCC) for resonant grounded transmission systems using high performance voltage source inverter Mathijs Janssen, S. B. Kraemer, R. Schmidt et al. | 28 Sep 2004 | 41 |
| 9 | A constitutive model for anisotropic materials based on Neuber’s rule Roland Mücke, Otto-Ernst Bernhardi · Computer Methods in Applied Mechanics and Engineering | Sep 2003 | 34 |
| 10 | Validation of simulation models in the context of railway vehicle acceptance Oldřich Polách, Andreas Böttcher, D. Vannucci et al. · Proceedings of the Institution of Mechanical Engineers Part F Journal of Rail and Rapid Transit | 28 Oct 2014 | 33 |
| 11 | A new approach to define criteria for rail vehicle model validation Oldřich Polách, Andreas Böttcher · Vehicle System Dynamics | 12 Feb 2014 | 32 |
| 12 | Direct self control with minimum torque ripple and high dynamics for a double three-level GTO inverter drive Mariska M. H. P. Janssen, Andreas Steimel · IEEE Transactions on Industrial Electronics | Oct 2002 | 26 |
| 13 | Characterisation of large solid recovered fuel particles for direct co-firing in large PF power plants Gregory Dunnu, Jörg Maier, Thomas Hilber et al. · Fuel | 23 Mar 2009 | 24 |
| 14 | Comparison between field and laboratory steam oxidation testing on aluminide coatings on P92 Alina Agüero, V. González, Marcos Gutiérrez et al. · Materials and Corrosion | 12 Jan 2011 | 24 |
| 15 | Sixth Torque Harmonic in PWM Inverter-Fed Induction Drives and Its Compensation Juriy Plotkin, Manfred Stiebler, D. Hofmeyer · IEEE Transactions on Industry Applications | Jul 2005 | 23 |
| 16 | Breakdown strength of vegetable-based oils under AC and lightning impulse voltages Dejan Vukovic, Stefan Tenbohlen, Jörg Harthun et al. | Jun 2011 | 21 |
| 17 | High dynamic control of a three-level voltage-source-converter drive for a main strip mill Joachim Böcker, Jörg Janning, H. Jebenstreit · IEEE Transactions on Industrial Electronics | Oct 2002 | 18 |
| 18 | CO2 capture system–Confirmation of oxy-combustion promises through pilot operation Frank Kluger, Bénédicte Prodhomme, Patrick Mönckert et al. · Energy Procedia | 2011 | 18 |
| 19 | Operational Experience With High Efficiency Cyclones: Comparison Between Boiler A and B in the Zeran Power Plant — Warsaw, Poland Ireneusz Lalak, Joachim Seeber, Frank Kluger et al. | 2003 | 18 |
| 20 | Optimizing Lifetime Consumption and Increasing Flexibility Using Enhanced Lifetime Assessment Methods With Automated Stress Calculation From Long-Term Operation Data Jan Vogt, Thomas Schaaf, Klaus Helbig | 3 Jun 2013 | 17 |
| 21 | Modeling the Airborne Transmission of SARS-CoV-2 in Public Transport Christina Matheis, Victor Norrefeldt, Harald Will et al. · Atmosphere | 25 Feb 2022 | 15 |
| 22 | Robotic crawler for inspecting generators with very narrow air gaps Wolfgang P. P. Fischer, Gilles Caprari, Roland Siegwart et al. | 2009 | 15 |
| 23 | Electrical conductivity measurement and determination of ion mobility in insulating oil Farzaneh Vahidi, Mark Jovalekic, Stefan Tenbohlen et al. | Jun 2013 | 15 |
| 24 | Launching Lean Product Development at an Rail Vehicle Manufacturer Carsten Stechert, Vitali Scheck, Carsten Fischer · Procedia CIRP | 2019 | 12 |
| 25 | Dynamic performance studies for a ±150 MVAr STATCOM for northeast utilities A.W. Scarfone, D.J. Hanson, C. Horwill et al. | 19 Oct 2004 | 12 |
| 26 | ASSESSMENT OF TWO-PHASE FLOW MODELS FOR THE SIMULATION OF PULVERIZED COAL COMBUSTION Bernd Epple, W.A. Fiveland, Bernd Krohmer et al. · Clean Air | 2005 | 12 |
| 27 | The power supply system of the Dynamic Ergodic Divertor at TEXTOR-94 Olaf Neubauer, S. Nowak · Fusion Engineering and Design | Nov 2001 | 11 |
| 28 | Thermal Modeling and Mechanical Integrity Based Design of a Heat Shield on a High Pressure Module Solar Steam Turbine Inner Casing With Focus on Lifetime P. Stein, Gabriel Marinescu, Dominik Born et al. | 16 Jun 2014 | 10 |
| 29 | New oxidation-resistant coatings for steam power plants at 650 °C M. Scheefer, Reinhard Knödler, Brendon Scarlin et al. · Materials and Corrosion | Dec 2005 | 10 |
| 30 | Crosswind sensitivity assessment of a representative Europe-wide range of conventional vehicles Nicolas Paradot, R. Grégoire, Marc Stiepel et al. · Proceedings of the Institution of Mechanical Engineers Part F Journal of Rail and Rapid Transit | 31 Jul 2015 | 10 |
| 31 | Markov-Based Malware Propagation Modeling and Analysis in Multi-Layer Networks Stavros Karageorgiou, Vasileios A. Karyotis · Network | 17 Sep 2022 | 9 |
| 32 | A lifetime prediction procedure for anisotropic materials Otto-Ernst Bernhardi, Roland M�cke · Communications in Numerical Methods in Engineering | 2000 | 9 |
| 33 | First Passenger Operation of a State-of-the-art Battery-Electric Multiple Unit (BEMU) in Germany Pavel Boev, Ulrich S Zimmermann, Benjamin Ebrecht et al. · Transportation research procedia | 2023 | 8 |
| 34 | Novel high power IGBT inverter for a power conditioning system M. Nahrstaedt, Reinhard G. W. Zingel | 2005 | 8 |
| 35 | Influence of electrode material on conductivity measurements under DC stresses Farzaneh Vahidi, Stefan Tenbohlen, Michael Rosner et al. | Jun 2014 | 8 |
| 36 | Advancement in CFB Technology: A Combination of Excellent Environmental Performance and High Efficiency George N. Stamatelopoulos, Joachim Seeber, Richard S. Skowyra | 2005 | 8 |
| 37 | Evaluation of Two New Thermal Barrier Coating Materials Produced by APS and EB-PVD Bilge Saruhan, Uwe Schulz, Per-Erik Bengtsson et al. · Ceramic engineering and science proceedings | 26 Mar 2008 | 8 |
| 38 | Very Compact Climbing Robot rolling on Magnetic Hexagonal Cam-Discs, with High Mobility on Obstacles but Minimal Mechanical Complexity Wolfgang P. P. Fischer, Gilles Caprari, Roland Siegwart et al. · Repository for Publications and Research Data (ETH Zurich) | 2010 | 7 |
| 39 | Design of a 20 MWth Carbonate Looping Pilot Plant for CO2-capture of Coal Fired Power Plants by Means of Limestone Margrit Junk, Johannes Kremer, Jochen Ströhle et al. · Energy Procedia | 2014 | 6 |
| 40 | Multi-level medium voltage inverters for reactive power and harmonic compensation Jörg Janning, Aurélie Bocquel | 2005 | 5 |
| 41 | Space charge formation in insulating liquids under DC stresses Farzaneh Vahidi, Stefan Tenbohlen, Michael Rosner et al. | Jun 2014 | 5 |
| 42 | Low power converters for high output voltages Christian Keller, Roland Peter Jakob | 2005 | 5 |
| 43 | A development and application of circuit breakers diagnostic and monitoring J.A. Dewulf, Taeho Jung, J. Dupraz et al. | 28 Sep 2004 | 5 |
| 44 | Comparative experimental study of dielectric strength of oil-cellulose insulation for mineral and vegetable-based oils Dejan Vukovic, Mark Jovalekic, Stefan Tenbohlen et al. | Jun 2012 | 5 |
| 45 | Steam Oxidation of Martensitic Steels and of Ni-Base Alloys: Comparison of Lab Tests with Operating Power Plants Reinhard Knödler, S. Straub · Oxidation of Metals | 3 Jun 2014 | 5 |
| 46 | Assessment of hot tears in cast steel components Karl Maile, Heinrich Theofel, Cindy Weichert et al. · International Journal of Pressure Vessels and Piping | Nov 2001 | 5 |
| 47 | Simulation of the two-phase flow in a laboratory coal pulveriser Ali Cemal Beni̇m, P. Stegelitz, Bernd Epple · Forschung im Ingenieurwesen | 6 Jul 2005 | 5 |
| 48 | Numerical Simulation of Grinding and Drying Performance of a Fluid-Energy Lignite Mill J.S. Anagnostopoulos, George C. Bergeles, Bernd Epple et al. · Journal of Fluids Engineering | 18 Oct 2000 | 4 |
| 49 | Spatial Free Plastic Forming of Slender Parts—Machine Design, Forming Limits, and Application M. Thalmair, H.G. Lippmann, Martin Reigl · Journal of Engineering Materials and Technology | 24 Jul 2001 | 3 |
| 50 | Impact of Low Load Operation on Plant Lifetime Jan Vogt, Thomas Schaaf, Hong‐Tao Sun et al. | 16 Jun 2014 | 3 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.