Institution · Belgian Ceramic Research Centre
Most cited papers from Belgian Ceramic Research Centre
What are the most cited papers from Belgian Ceramic Research Centre?
The most cited paper from Belgian Ceramic Research Centre is "Flame retardant polymer materials: An update and the future for 3D printing developments" (Henri Vahabi, Fouad Laoutid, Mehrshad Mehrpouya et al., 2021), with 265 citations. Next come "Shaping of ceramic parts by selective laser melting of powder bed" (116) and "Characterization of mechanical properties of suspension plasma sprayed TiO2 coatings using scratch test" (101).
Showing 50 of 64 papers. Every paper with more than 21 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Flame retardant polymer materials: An update and the future for 3D printing developments Henri Vahabi, Fouad Laoutid, Mehrshad Mehrpouya et al. · Materials Science and Engineering R Reports | 18 Jan 2021 | 265 |
| 2 | Shaping of ceramic parts by selective laser melting of powder bed Enrique Juste, Fabrice Petit, Véronique Lardot et al. · Journal of materials research/Pratt's guide to venture capital sources | 7 Jul 2014 | 116 |
| 3 | Characterization of mechanical properties of suspension plasma sprayed TiO2 coatings using scratch test Roman Jaworski, Lech Pawłowski, Francine Roudet et al. · Surface and Coatings Technology | 8 Oct 2007 | 101 |
| 4 | Densification of alumina by SPS and HP: A comparative study Maryse Demuynck, Jean‐Pierre Erauw, Omer Van der Biest et al. · Journal of the European Ceramic Society | 22 Nov 2011 | 91 |
| 5 | Performance characteristics of lateritic soil bricks fired at low temperatures: a case study of Cameroon Laurent Mbumbia, Albert Mertens de Wilmars, Jacques Tirlocq · Construction and Building Materials | Apr 2000 | 91 |
| 6 | Two zones microstructure of suspension plasma sprayed hydroxyapatite coatings Stefan Kozerski, Lech Pawłowski, Roman Jaworski et al. · Surface and Coatings Technology | 17 Sep 2009 | 86 |
| 7 | Processing and characterization of laser clad NiCrBSi/WC composite coatings — Influence of microstructure on hardness and wear Dorian Deschuyteneer, Fabrice Petit, Maurice Gonon et al. · Surface and Coatings Technology | 30 Oct 2015 | 86 |
| 8 | Processing and properties of biphasic calcium phosphates bioceramics obtained by pressureless sintering and hot isostatic pressing M. Descamps, Laurent Boilet, G. Moreau et al. · Journal of the European Ceramic Society | 24 Jan 2013 | 82 |
| 9 | High temperature mechanical properties of reaction-sintered mullite/zirconia and mullite/alumina/zirconia composites G. Orange, Gilbert Fantozzi, F. Cambier et al. · Journal of Materials Science | Jul 1985 | 79 |
| 10 | Coupling additive manufacturing and microwave sintering: A fast processing route of alumina ceramics Hugo Curto, Anthony Thuault, Florian Jean et al. · Journal of the European Ceramic Society | 5 Nov 2019 | 70 |
| 11 | Binder jetting process with ceramic powders: Influence of powder properties and printing parameters Qirong Chen, Enrique Juste, Marie Lasgorceix et al. · Open Ceramics | 3 Jan 2022 | 68 |
| 12 | Influence of large particle size – up to 1.2 mm – and morphology on wear resistance in NiCrBSi/WC laser cladded composite coatings Dorian Deschuyteneer, Fabrice Petit, Maurice Gonon et al. · Surface and Coatings Technology | 29 Dec 2016 | 66 |
| 13 | Poly(lactic acid)-Based Materials for Automotive Applications Amani Bouzouita, Delphine Notta‐Cuvier, Jean‐Marie Raquez et al. · Advances in polymer science | 2017 | 62 |
| 14 | Surfactant-assisted ultrasonic spray pyrolysis of nickel oxide and lithium-doped nickel oxide thin films, toward electrochromic applications Jessica Denayer, Geoffroy Bister, Priscilla Simonis et al. · Applied Surface Science | 28 Sep 2014 | 58 |
| 15 | Thermodynamics of the Al–C–O system and properties of SiC–AlN–Al2OC composites J.-M. Lihrmann, Jacques Tirlocq, P. Descamps et al. · Journal of the European Ceramic Society | Dec 1999 | 58 |
| 16 | Design of highly tough poly( l ‐lactide)‐based ternary blends for automotive applications Amani Bouzouita, Cédric Samuel, Delphine Notta‐Cuvier et al. · Journal of Applied Polymer Science | 27 Jan 2016 | 56 |
| 17 | Mechanical properties of suspension plasma sprayed hydroxyapatite coatings submitted to simulated body fluid Leszek Łatka, Lech Pawłowski, Didier Chicot et al. · Surface and Coatings Technology | 18 Jun 2010 | 55 |
| 18 | Preliminary study on suspension plasma sprayed ZrO2+8wt.% Y2O3 coatings Stefan Kozerski, Leszek Łatka, Lech Pawłowski et al. · Journal of the European Ceramic Society | 19 Jun 2011 | 54 |
| 19 | Processing and properties of transparent hydroxyapatite and β tricalcium phosphate obtained by HIP process Laurent Boilet, M. Descamps, Emmanuelle Rguiti et al. · Ceramics International | 15 Jun 2012 | 50 |
| 20 | High‐Temperature Characterization of Reaction‐Sintered Mullite‐Zirconia Composites P. Descamps, Shuji Sakaguchi, Marc Poorteman et al. · Journal of the American Ceramic Society | Oct 1991 | 48 |
| 21 | Macroporous ceramics: Novel route using partial sintering of alumina-powder agglomerates obtained by spray-drying Guillaume Jean, Valérie Sciamanna, Maryse Demuynck et al. · Ceramics International | 27 Feb 2014 | 47 |
| 22 | Effect of build orientation on the manufacturing process and the properties of stereolithographic dental ceramics for crown frameworks Marion Dehurtevent, Lieven Robberecht, Anthony Thuault et al. · Journal of Prosthetic Dentistry | 4 Apr 2020 | 45 |
| 23 | A modified wet chemical synthesis of Wollastonite ceramic nanopowders and their characterizations Mehieddine Bouatrous, Ferhat Bouzerara, Arvind Kumar Bhakta et al. · Ceramics International | 7 Feb 2020 | 43 |
| 24 | Multiple scratch tests and surface-related fatigue properties of monolithic ceramics and soda lime glass Fabrice Petit, Cédric Ott, F. Cambier · Journal of the European Ceramic Society | 13 Nov 2008 | 43 |
| 25 | Recent Developments in Suspension Plasma Sprayed Titanium Oxide and Hydroxyapatite Coatings Roman Jaworski, Lech Pawłowski, Christel Pierlot et al. · Journal of Thermal Spray Technology | 9 Nov 2009 | 43 |
| 26 | Bone-like ceramic scaffolds designed with bioinspired porosity induce a different stem cell response Silvia Panseri, Monica Montesi, Dominique Hautcoeur et al. · Journal of Materials Science Materials in Medicine | 2021 | 42 |
| 27 | Fabrication of doped β-tricalcium phosphate bioceramics by Direct Ink Writing for bone repair applications Nicolas Somers, Florian Jean, Marie Lasgorceix et al. · Journal of the European Ceramic Society | 13 Oct 2022 | 41 |
| 28 | Thermal conductivity of ceramic/metal composites from preforms produced by freeze casting Dominique Hautcoeur, Yannick Lorgouilloux, Anne Leriche et al. · Ceramics International | 5 Jun 2016 | 40 |
| 29 | Reaction sintering: correlation between densification and reaction E. Di Rupo, Michel R. Anseau, RICHARD J. BROOK · Journal of Materials Science | Dec 1979 | 39 |
| 30 | Unimorph mirror for adaptive optics in space telescopes David Alaluf, Renaud Bastaits, Kainan Wang et al. · Applied Optics | May 2018 | 38 |
| 31 | Contribution to the understanding of the high temperature behavior and of the compressive creep behavior of silica refractory materials Pascal Pilate, Véronique Lardot, F. Cambier et al. · Journal of the European Ceramic Society | 12 Oct 2014 | 38 |
| 32 | 3D printed triply periodic minimal surfaces calcium phosphate bone substitute: The effect of porosity design on mechanical properties Islam Bouakaz, Ehsan Sadeghian Dehkord, Sylvain Meille et al. · Ceramics International | 31 Oct 2023 | 36 |
| 33 | Colloidal processing, hot pressing and characterisation of electroconductive MWCNT-alumina composites with compositions near the percolation threshold Marc Poorteman, Maria Traianidis, Geoffroy Bister et al. · Journal of the European Ceramic Society | 18 Sep 2008 | 36 |
| 34 | Relevance of instrumented micro-indentation for the assessment of hardness and Young's modulus of brittle materials Fabrice Petit, V. Vandeneede, F. Cambier · Materials Science and Engineering A | 29 Dec 2006 | 36 |
| 35 | Silicon nitride/silicon carbide nanocomposite obtained by nitridation of SiC: fabrication and high temperature mechanical properties Marc Poorteman, P. Descamps, F. Cambier et al. · Journal of the European Ceramic Society | 25 Apr 2003 | 36 |
| 36 | Fracture toughness and residual stress measurements in tempered glass by Hertzian indentation Fabrice Petit, A.C. Sartieaux, Maurice Gonon et al. · Acta Materialia | 21 Feb 2007 | 35 |
| 37 | Equivalence between domain walls and “noncommutative” two-sheeted spacetimes: Model-independent matter swapping between branes Michaël Sarrazin, Fabrice Petit · Physical review. D. Particles, fields, gravitation, and cosmology/Physical review. D. Particles and fields | 16 Feb 2010 | 34 |
| 38 | Ceramic toughness assessment through edge chipping measurements—Influence of interfacial friction Fabrice Petit, V. Vandeneede, F. Cambier · Journal of the European Ceramic Society | 13 Feb 2009 | 34 |
| 39 | Thermoelectric properties of n-type Ca1−xDyxMn1−yNbyO3−δ compounds (x=0, 0.02, 0.1 and y=0, 0.02) prepared by spray-drying method Herve Muguerra, Beatriz Rivas‐Murias, Maria Traianidis et al. · Journal of Alloys and Compounds | 19 Apr 2011 | 33 |
| 40 | Osteoblastic cells colonization inside beta-TCP macroporous structures obtained by ice-templating Edwige Meurice, Franck Bouchart, Jean‐Christophe Hornez et al. · Journal of the European Ceramic Society | 4 Nov 2015 | 33 |
| 41 | Mullite coatings on ceramic substrates: Stabilisation of Al2O3–SiO2 suspensions for spray drying of composite granules suitable for reactive plasma spraying Audrey Schrijnemakers, S. André, Geoffroy Lumay et al. · Journal of the European Ceramic Society | 24 Feb 2009 | 33 |
| 42 | Microstructure, wear and crack propagation evolution of electrodeposited nickel-nano diamond composite coatings: Molecular dynamic modeling and experimental study Sepehr Yazdani, Mohsen Mesbah, Védi Dupont et al. · Surface and Coatings Technology | 11 Apr 2023 | 32 |
| 43 | Spark Plasma Sintering and tribological behavior of Ti3SiC2–Ti5Si3–TiC composites Abdessabour Benamor, Youcef Hadji, Nabil Chiker et al. · Ceramics International | 19 Jul 2019 | 32 |
| 44 | Improved coloration contrast and electrochromic efficiency of tungsten oxide films thanks to a surfactant-assisted ultrasonic spray pyrolysis process Joeri F.M. Denayer, Philippe Aubry, Geoffroy Bister et al. · Solar Energy Materials and Solar Cells | 9 Sep 2014 | 31 |
| 45 | Influence of the Chemical Composition on the Phase Constitution and the Elastic Properties of RF‐Sputtered Hydroxyapatite Coatings Rony Snyders, Étienne Bousser, Denis Mušić et al. · Plasma Processes and Polymers | 22 Oct 2007 | 29 |
| 46 | Spark Plasma Sintering: Homogenization of the Compact Temperature Field for Non Conductive Materials Thierry Vanherck, Guillaume Jean, Maurice Gonon et al. · International Journal of Applied Ceramic Technology | 19 Nov 2013 | 28 |
| 47 | Considerations of some key concepts in fundamental Materials Science Michel R. Anseau · Journal of Materials Science | 1982 | 28 |
| 48 | Creep behaviour of Al2O3–SiC nanocomposites P. Descamps, Daniel J. O'Sullivan, Marc Poorteman et al. · Journal of the European Ceramic Society | Oct 1999 | 27 |
| 49 | Wear Performance of Thermally Sprayed NiCrBSi and NiCrBSi-WC Coatings Under Two Different Wear Modes Rachida Rachidi, Bachir Elkihel, Fabienne Delaunois et al. · Journal of Materials and Environmental Sciences | Oct 2017 | 26 |
| 50 | Powder Bed Selective Laser Processing of Alumina: Scanning Strategies Investigation Mohamed Abdelmoula, Gökhan Küçüktürk, Enrique Juste et al. · Applied Sciences | 12 Jan 2022 | 25 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.