| 1 |
Live Biotherapeutic Products, A Road Map for Safety Assessment
Alice Rouanet et al. · Frontiers in Medicine
Open access |
19 Jun 2020 |
114 |
| 2 |
Mechanical behavior of 3D ‐printed polymeric metamaterials for lightweight applications
Eliza Truszkiewicz, Andreas Thalhamer, Marlene Rossegger et al. · Journal of Applied Polymer Science
|
10 Sep 2021 |
39 |
| 3 |
Localized Corrosion Resistance Of Welded Austenitic And Lean Duplex Stainless Steels
Mikael Johansson, Elin M. Westin, James A. Oliver et al. · Welding in the World
|
Sep 2011 |
20 |
| 4 |
Modelling of δ-Phase Dissolution During Preheating of Inconel 718 Turbine Disks
Martin Stockinger, Ernst Kozeschnik, Bruno Buchmayr et al.
Conference paperOpen access |
2001 |
17 |
| 5 |
Wear and Friction Coefficient of Particle Reinforced Ti‐Alloys
María Cecilia Poletti, Andreas Merstallinger, Th. Schubert et al. · Materialwissenschaft und Werkstofftechnik
|
Oct 2004 |
15 |
| 6 |
Effect of nitrogen in backing gas on duplex root weld properties of heavy-walled pipe
Andrew Sales, Elin M. Westin, Paul A. Colegrove · Welding in the World
Open access |
22 Apr 2016 |
11 |
| 7 |
Comparative Evaluation of Virtual Reality and In-Person Onboarding for Assembly Trainings in Manufacturing
Tanja Zigart, Felix Stürzl, Daniel Niedermayr et al.
Conference paperOpen access |
16 Oct 2023 |
10 |
| 8 |
The fatigue endurance limit of a high strength CrNi steel in a fretting dominated regime
Thomas Christiner, Johannes Reiser, István Gódor et al. · Tribology International
|
2 Feb 2012 |
7 |
| 9 |
Experimental Studies and Thermodynamic Simulation of Phase Transformations in γ-TiAl Based Alloys
Harald F. Chladil, Helmut Clemens, Harald Leitner et al. · MRS Proceedings
|
2004 |
5 |
| 10 |
Parameter analysis and reader architectures for broadband 13.56 MHz RFID systems
Martin Gossar, H. Witschnig, Harald Enzinger · 2010 IEEE MTT-S International Microwave Symposium
Conference paper |
May 2010 |
3 |
| 11 |
The Fatigue Behaviour of a High Strength CrNi-Steel Regarding Fretting Fatigue
Thomas Christiner, Johannes Reiser, István Gódor et al.
Conference paper |
15 Jul 2012 |
3 |
| 12 |
Unusual deterioration in a patient with multiple sclerosis on natalizumab therapy
Thomas Gattringer, Christian Enzinger, Michael Khalil et al. · Neurology Neuroimmunology & Neuroinflammation
Open access |
25 Apr 2014 |
2 |
| 13 |
High Pressure and Flow Rate Measurements on Peroxide Dosing Pumps Under Laboratory and Site Conditions
Franz Trieb, Reinhard Karl, R. Moderer
Conference paper |
2006 |
2 |
| 14 |
Combined numerical and experimental investigations on Fretting wear
Thomas Christiner, J. Reiser, István Gódor et al. · Procedia Engineering
Conference paperOpen access |
Apr 2010 |
2 |
| 15 |
The SIRT Family: Subcellular Localization and Main Functions
Ping Quan, Christoph Schatz, Daria Maria Filippini et al. · International Journal of Molecular Sciences
Open access |
6 Jul 2026 |
1 |
| 16 |
Spatial Agent-Based Modelling and Simulation to Evaluate on Public Policies for Energy Transition
Georg Weinberger, Simón Ladino Cano, Rizwan Bulbul et al. · International Sustainable Energy Conference - Proceedings
Conference paperOpen access |
18 Apr 2024 |
1 |
| 17 |
Agreement between Clinical Assessment and Laboratory Diagnosis of Ringworm in Calves at Auction Markets
Joachim Spergser, Thiemo Neuhuber, Herfried Haupt et al. · Animals
Open access |
25 Jan 2024 |
1 |
| 18 |
Limits of Allowable Static and Cyclic Loads on Lens Ring Gaskets
Hermann Maderbacher
Conference paper |
14 Jul 2019 |
1 |
| 19 |
Deep-Hole-Drilling of High Pressure Tubes: Process Stability and the Influence of Eccentricity on Autofrettage and Heat Transfer
Hermann Maderbacher, Manfred Pölzl
Conference paper |
16 Jul 2017 |
1 |
| 20 |
Metallurgical problems associated with welding corrosion resistant ferritic-austenitic CrNi steels (duplex steels)
Günther Rabensteiner, Josef Tösch, E Pertender · Welding International
|
1990 |
1 |
| 21 |
Waterjet Cutting: State of the Art and Future Trends
Franz Trieb
Conference paper |
2005 |
1 |
| 22 |
Fatigue Comparison of Different High Pressure Materials and Design Consequences
Manfred Po¨lzl
Conference paper |
2007 |
1 |
| 23 |
Schnittstellen im Katastrophenschutz der Stadt Graz am Beispiel Hochwasser
Gerald Zenz, Amy Hammer, R. Strukely · Österreichische Wasser- und Abfallwirtschaft
|
Aug 2011 |
1 |
| 24 |
Molybdenum and Chromium Depletion at Grain Boundary Precipitates Alloy 926
Roland Lackner, Gregor Mori, M. Prohaska et al. · BHM Berg- und Hüttenmännische Monatshefte
|
6 Aug 2013 |
1 |
| 25 |
Effect of Cervical Lateral Flexion Prepositioning on Segmental Cervical Axial Rotation of C1 and C2: A Computed Tomography Cadaveric Investigation
Anja Matthijs, Omer C.G. Matthijs, Gunther Windisch et al. · Journal of Manipulative and Physiological Therapeutics
Open access |
2025 |
0 |
| 26 |
Forging of an age-hardenable Mg–Al–Ca–Mn–Zn alloy on industrial scale
Nikolaus Papenberg, Thomas Hatzenbichler, Florian Grabner et al. · SN Applied Sciences
Open access |
12 Dec 2022 |
0 |
| 27 |
The Influence of Bauschinger Effect on the Stability of Residual Stresses in Autofrettaged High Pressure Tubes
Hermann Maderbacher, Manfred Pölzl
Conference paper |
15 Jul 2018 |
0 |
| 28 |
Gewässeruntersuchung und Datenfernübertragung
Wolf‐Ullrich Malm · CHEMKON
|
1998 |
0 |
| 29 |
Development of Materials, Design, Calculation and Testing of High Pressure Equipment, Especially for Low Density Polyethylene Plants
Johannes Schedelmaier, Manfred Po¨lzl
Conference paper |
2002 |
0 |
| 30 |
Comparison of Different Codes and Standards Applicable for Design and Calculation of High Pressure Equipment
Johannes Schedelmaier, Manfred Po¨lzl
Conference paper |
2004 |
0 |
| 31 |
Development on High Pressure Material ASTM SA 723: Design and Economic Consequences
Manfred Po¨lzl, Johannes Schedelmaier, Johann Zand
Conference paper |
2006 |
0 |