Institution · BorgWarner (United Kingdom)
Most cited papers from BorgWarner (United Kingdom)
What are the most cited papers from BorgWarner (United Kingdom)?
The most cited paper from BorgWarner (United Kingdom) is "Acoustic characterisation of a small high-speed centrifugal compressor with casing treatment: An experimental study" (Sidharath Sharma, Alberto Broatch, J. García-Tíscar et al., 2019), with 32 citations. Next come "Rheology of short glass fiber‐reinforced thermoplastics and its application to injection molding. III. Use of a high shear rate capillary rheometer in the injection molding shear rate range" (32) and "Mechanical design of rotors for permanent magnet high‐speed electric motors for turbocharger applications" (27).
Showing 32 of 32 papers. Every paper is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Acoustic characterisation of a small high-speed centrifugal compressor with casing treatment: An experimental study Sidharath Sharma, Alberto Broatch, J. García-Tíscar et al. · Aerospace Science and Technology | 3 Nov 2019 | 32 |
| 2 | Rheology of short glass fiber‐reinforced thermoplastics and its application to injection molding. III. Use of a high shear rate capillary rheometer in the injection molding shear rate range Roger J. Crowson, Anthony J. Scott, Derek W. Saunders · Polymer Engineering and Science | Aug 1981 | 32 |
| 3 | Mechanical design of rotors for permanent magnet high‐speed electric motors for turbocharger applications Simon Mark Barrans, Mahir Al‐Ani, Jeff Carter · IET Electrical Systems in Transportation | 24 May 2017 | 27 |
| 4 | Evaluation of modelling parameters for computing flow-induced noise in a small high-speed centrifugal compressor Sidharath Sharma, J. García-Tíscar, John M. Allport et al. · Aerospace Science and Technology | 10 Jan 2020 | 25 |
| 5 | Acoustic characteristics of a ported shroud turbocompressor operating at design conditions Sidharath Sharma, Alberto Broatch, J. García-Tíscar et al. · International Journal of Engine Research | 27 Nov 2018 | 20 |
| 6 | Acoustic and pressure characteristics of a ported shroud turbocompressor operating at near surge conditions Sidharath Sharma, Alberto Broatch, J. García-Tíscar et al. · Applied Acoustics | 16 Jan 2019 | 15 |
| 7 | The Impact of Volute Aspect Ratio on the Performance of a Mixed Flow Turbine Samuel P. Lee, Simon Mark Barrans, Martyn L. Jupp et al. · Aerospace | 23 Nov 2017 | 15 |
| 8 | Comparison of electromagnetic performance and power losses of a high-speed machine fed by PWM and PAM inverter strategies Mahir Al‐Ani, J. Carter, Martyn L. Jupp · 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016) | 2016 | 11 |
| 9 | Effects of ported shroud casing treatment on the acoustic and flow behaviour of a centrifugal compressor Sidharath Sharma, J. García-Tíscar, John M. Allport et al. · International Journal of Engine Research | 7 Oct 2019 | 9 |
| 10 | Analysis of leading edge flow characteristics in a mixed flow turbine under pulsating flows Samuel P. Lee, Martyn L. Jupp, Simon Mark Barrans et al. · Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy | 5 Jun 2018 | 9 |
| 11 | Electromagnetic and mechanical analysis of high speed SPM rotor with copper shield Mahir Al‐Ani, Simon Mark Barrans, J. Carter | May 2017 | 9 |
| 12 | Ported Shroud Flow Processes and Their Effect on Turbocharger Compressor Operation Sidharath Sharma, Martyn L. Jupp, Ambrose K. Nickson et al. | 26 Jun 2017 | 9 |
| 13 | The Influence of Pulse Shape on the Performance of a Mixed Flow Turbine for Turbocharger Applications Samuel P. Lee, Ahmed Rezk, Martyn L. Jupp et al. · International Journal of Mechanical Engineering and Robotics Research | 2016 | 9 |
| 14 | The impact of volute aspect ratio and tilt on the performance of a mixed flow turbine Samuel P. Lee, Simon Mark Barrans, Ambrose K. Nickson · Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy | 27 Feb 2021 | 8 |
| 15 | Investigation Into the Impact of Span-Wise Flow Distribution on the Performance of a Mixed Flow Turbine Samuel P. Lee, Simon Mark Barrans, Martyn L. Jupp et al. | 11 Jun 2018 | 8 |
| 16 | Analysis of a Tilted Turbine Housing Volute Design Under Pulsating Inlet Conditions Samuel P. Lee, Martyn L. Jupp, Ambrose K. Nickson et al. | 26 Jun 2017 | 8 |
| 17 | The influence of secondary flow structures in a turbocharger turbine housing in steady state and pulsating flow conditions Samuel P. Lee, Martyn L. Jupp, Ambrose K. Nickson | Jul 2016 | 7 |
| 18 | On the influence of thermal boundary conditions on the Thermo Mechanical Analysis of turbine housing of a turbocharger Claus Oberste‐Brandenburg, Kiumars Shoghi, Marc Gugau et al. · Elsevier eBooks | 2012 | 7 |
| 19 | Optimization of Metalized Film Capacitor Connection to Reduce Stray Inductance Theo Penven, Christian Marcelo Martín, Charles Joubert et al. · IEEE Transactions on Components Packaging and Manufacturing Technology | 5 Oct 2018 | 5 |
| 20 | Compressor wheel low cycle fatigue calculations for off highway applications – an approach to accurately calculate application duty cycle Kapil Ohri, Kiumars Shoghi · Elsevier eBooks | 2012 | 5 |
| 21 | A Figure of Merit for Power FET Switching Devices Patrick Palmer, Edward Shelton, Jeff Carter et al. · 2022 IEEE Energy Conversion Congress and Exposition (ECCE) | 9 Oct 2022 | 4 |
| 22 | Evolution of flow characteristics in a centrifugal compressor with an increase in operating speed Sidharath Sharma, J. García-Tíscar, John M. Allport et al. · International Journal of Engine Research | 4 May 2020 | 4 |
| 23 | Impact of Impeller Casing Treatment on the Acoustics of a Small High Speed Centrifugal Compressor Sidharath Sharma, J. García-Tíscar, John M. Allport et al. | 11 Jun 2018 | 3 |
| 24 | The Impact of Housing Features Relative Location on a Turbocharger Compressor Flow Sidharath Sharma, Martyn L. Jupp, Simon Mark Barrans et al. · International Journal of Mechanical Engineering and Robotics Research | 2017 | 3 |
| 25 | Determining Stress in Turbocharger Impellers due to Component Machining Process Simon Mark Barrans, Md Shams E. Tabriz, Christian F. Ellis | 26 Jun 2017 | 2 |
| 26 | Development and Optimization of Electric Drivetrains Peter Barrass, Steve Stover, Dave Fulton · MTZ worldwide | 13 Nov 2020 | 1 |
| 27 | Entwicklung und Optimierung elektrischer Antriebsstränge Peter Barrass, Steve Stover, Dave Fulton · MTZ - Motortechnische Zeitschrift | 12 Nov 2020 | 1 |
| 28 | Rotor loss reduction using segmented inverter in surface-mounted permanent magnet drive Mahir Al‐Ani, Simon Mark Barrans, J. Carter | May 2017 | 1 |
| 29 | The introduction of a tilted volute design for operation with a mixed flow turbine for turbocharger applications Samuel P. Lee, Martyn L. Jupp, Ambrose K. Nickson | Jul 2016 | 1 |
| 30 | A Comparison of Current Determination Strategies for the IPMSM Considering Magnetic Saturation, Core Losses and Resistance Variation Nicholas Turton, Christopher Pearce, Alessandro Galassini et al. | 8 Apr 2021 | 0 |
| 31 | Successfully integrating organisations and cultures: A case study Wim Broekhuysen · European Management Journal | 1988 | 0 |
| 32 | Influence of holding time in thermal cycle proven by state-of-the-art thermomechanical fatigue calculation in the turbine housing of a turbocharger Kiumars Shoghi · Elsevier eBooks | 2014 | 0 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.