Most cited papers from CemeCon (Germany)

CemeCon (Germany)

What are the most cited papers from CemeCon (Germany)?

The most cited paper from CemeCon (Germany) is "Nrf2-Keap1 pathway promotes cell proliferation and diminishes ferroptosis" (Zheng Fan, Anna-Katharina Wirth, Da‐Chung Chen et al., 2017), with 727 citations. Next come "Industrial deposition of binary, ternary, and quaternary nitrides of titanium, zirconium, and aluminum" (308) and "The effect of specimen roughness and indenter tip geometry on the determination accuracy of thin hard coatings stress–strain laws by nanoindentation" (178).

Published TypeFieldAccessCitations

Showing 50 of 62 papers. Every paper with more than 23 citations is listed.

Most cited papers, sortable by citations and release date
#	Paper
1	Nrf2-Keap1 pathway promotes cell proliferation and diminishes ferroptosis Zheng Fan, Anna-Katharina Wirth, Da‐Chung Chen et al. · Oncogenesis Open access	14 Aug 2017	727
2	Industrial deposition of binary, ternary, and quaternary nitrides of titanium, zirconium, and aluminum Otto Knotek, W.‐D. Münz, Thorsten Leyendecker · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films	Jul 1987	308
3	The effect of specimen roughness and indenter tip geometry on the determination accuracy of thin hard coatings stress–strain laws by nanoindentation K.‐D. Bouzakis, Nikolaos Michailidis, S. Hadjiyiannis et al. · Materials Characterization	Sep 2002	178
4	A review of metal-ion-flux-controlled growth of metastable TiAlN by HIPIMS/DCMS co-sputtering Grzegorz Greczyński, Jun Lu, Jens S.K. Jensen et al. · Surface and Coatings Technology Open access	4 Feb 2014	165
5	Structure, elastic properties and phase stability of Cr1–xAlxN P.H. Mayrhofer, D. Music, Th. Reeswinkel et al. · Acta Materialia	15 Mar 2008	131
6	Process characteristics and film properties upon growth of TiOxfilms by high power pulsed magnetron sputtering Kostas Sarakinos, Jones Alami, Matthias Wuttig · Journal of Physics D Applied Physics	16 Mar 2007	129
7	Metal versus rare-gas ion irradiation during Ti1− x Al x N film growth by hybrid high power pulsed magnetron/dc magnetron co-sputtering using synchronized pulsed substrate bias Grzegorz Greczyński, Jun Lu, Jens S.K. Jensen et al. · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films Open access	7 Sep 2012	125
8	Mechanical properties and oxidation behaviour of (Al,Cr)N and (Al,Cr,Si)N coatings for cutting tools deposited by HPPMS Kirsten Bobzin, Nazlim Bagcivan, Philipp Immich et al. · Thin Solid Films	23 Jun 2008	125
9	Thin hard coatings stress–strain curve determination through a FEM supported evaluation of nanoindentation test results K.‐D. Bouzakis, Nikolaos Michailidis, Georg Erkens · Surface and Coatings Technology	Jul 2001	119
10	On the structure of (Ti, Al)N-PVD coatings Otto Knotek, Thorsten Leyendecker · Journal of Solid State Chemistry	Oct 1987	113
11	A new technique for testing the impact load of thin films: the coating impact test Otto Knotek, B. Bosserhoff, A. Schrey et al. · Surface and Coatings Technology	Nov 1992	110
12	Oxidation resistance of titanium–aluminium–silicon nitride coatings Angelika Vennemann, H.‐R. Stock, Jörn Kohlscheen et al. · Surface and Coatings Technology	12 May 2003	109
13	Advantages of nanocomposite coatings deposited by high power pulse magnetron sputtering technology Kirsten Bobzin, Nazlim Bagcivan, Philipp Immich et al. · Journal of Materials Processing Technology	7 Mar 2008	106
14	Experimental and computational study on the phase stability of Al-containing cubic transition metal nitrides Florian Rovere, Denis Mušić, Sergey Ershov et al. · Journal of Physics D Applied Physics	8 Jan 2010	106
15	Improvement of PVD coated inserts cutting performance, through appropriate mechanical treatments of substrate and coating surface K.‐D. Bouzakis, Nikolaos Michailidis, S. Hadjiyiannis et al. · Surface and Coatings Technology	Sep 2001	100
16	Comparative characterization of alumina coatings deposited by RF, DC and pulsed reactive magnetron sputtering R. Cremer, Mirjam Witthaut, D. Neuschütz et al. · Surface and Coatings Technology	Nov 1999	87
17	Strain-free, single-phase metastable Ti0.38Al0.62N alloys with high hardness: metal-ion energy vs. momentum effects during film growth by hybrid high-power pulsed/dc magnetron cosputtering Grzegorz Greczyński, Jun Lu, Jens S.K. Jensen et al. · Thin Solid Films	15 Jan 2014	83
18	Modified TiAlN coatings prepared by d.c. pulsed magnetron sputtering M. Keunecke, Christian Stein, Klaus Bewilogua et al. · Surface and Coatings Technology	18 Sep 2010	83
19	Properties and performance of high aluminum containing (Ti,Al)N based supernitride coatings in innovative cutting applications Georg Erkens, R. Cremer, T. Hamoudi et al. · Surface and Coatings Technology	2004	71
20	The effect of coating thickness, mechanical strength and hardness properties on the milling performance of PVD coated cemented carbides inserts K.‐D. Bouzakis, S. Hadjiyiannis, Georgios Skordaris et al. · Surface and Coatings Technology	2004	71
21	Effect on PVD coated cemented carbide inserts cutting performance of micro-blasting and lapping of their substrates K.‐D. Bouzakis, Georgios Skordaris, Nikolaos Michailidis et al. · Surface and Coatings Technology	7 Apr 2005	69
22	Novel strategy for low-temperature, high-rate growth of dense, hard, and stress-free refractory ceramic thin films Grzegorz Greczyński, Jun Lu, Stephan Bolz et al. · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films Open access	24 Jun 2014	68
23	Film thickness effect on mechanical properties and milling performance of nano-structured multilayer PVD coated tools Georgios Skordaris, K.‐D. Bouzakis, Tilemachos Kotsanis et al. · Surface and Coatings Technology	15 Sep 2016	64
24	Brittleness and fatigue effect of mono- and multi-layer PVD films on the cutting performance of coated cemented carbide inserts Georgios Skordaris, K.‐D. Bouzakis, Paschalis Charalampous et al. · CIRP Annals	2014	62
25	Determination of the fatigue behaviour of thin hard coatings using the impact test and a FEM simulation K.‐D. Bouzakis, Nectarios Vidakis, Thorsten Leyendecker et al. · Surface and Coatings Technology	Dec 1996	61
26	Performance of oxygen-rich TiALON coatings in dry cutting applications K. Tönshoff, Bernhard Karpuschewski, A. Mohlfeld et al. · Surface and Coatings Technology	Oct 1998	61
27	Thin hard coatings fracture propagation during the impact test K.‐D. Bouzakis, A. Siganos, Thorsten Leyendecker et al. · Thin Solid Films	14 Apr 2004	60
28	Wear mechanisms of (Ti1 − ,Al )N coatings in dry drilling K. Tönshoff, A. Mohlfeld, Thorsten Leyendecker et al. · Surface and Coatings Technology	Oct 1997	59
29	Correlation of the impact resistance of variously doped CrAlN PVD coatings with their cutting performance in milling aerospace alloys K.‐D. Bouzakis, Nikolaos Michailidis, Stefanos Gerardis et al. · Surface and Coatings Technology	16 Aug 2008	59
30	Effect of the Cutting Edge Radius and its Manufacturing Procedure, on the Milling Performance of PVD Coated Cemented Carbide Inserts K.‐D. Bouzakis, Nikolaos Michailidis, Georgios Skordaris et al. · CIRP Annals	2002	58
31	Performance of oxide PVD-coatings in dry cutting operations Christian Schulz, Joachim Dörr, I. Rass et al. · Surface and Coatings Technology	Sep 2001	56
32	The inclined impact test, an efficient method to characterize coatings' cohesion and adhesion properties K.‐D. Bouzakis, Antonios Asimakopoulos, Nikolaos Michailidis et al. · Thin Solid Films	26 Oct 2004	54
33	Optimisation of the cutting edge roundness and its manufacturing procedures of cemented carbide inserts, to improve their milling performance after a PVD coating deposition K.‐D. Bouzakis, Nikolaos Michailidis, Georgios Skordaris et al. · Surface and Coatings Technology	28 Dec 2002	52
34	The influence of the coating thickness on its strength properties and on the milling performance of PVD coated inserts K.‐D. Bouzakis, S. Hadjiyiannis, Georgios Skordaris et al. · Surface and Coatings Technology	16 Jul 2003	51
35	Dependence of the growth rate, quality, and morphology of diamond coatings on the pressure during the CVD-process in an industrial hot-filament plant Sabrina Schwarz, Stefan M. Rosiwal, Martin Frank et al. · Diamond and Related Materials	Mar 2002	49
36	Determination of the fatigue properties of multilayer PVD coatings on various substrates, based on the impact test and its FEM simulation K.‐D. Bouzakis, Nectarios Vidakis, Thorsten Leyendecker et al. · Thin Solid Films	Oct 1997	49
37	Investigations on hard coated reamers in different lubricant free cutting operations E. Lugscheider, Otto Knotek, C. Barimani et al. · Surface and Coatings Technology	Mar 1997	49
38	Industrial application of crystalline diamond-coated tools Thorsten Leyendecker, Oliver Lemmer, Albert Jurgens et al. · Surface and Coatings Technology	Nov 1991	48
39	Quantification of properties modification and cutting performance of (Ti1−xAlx)N coatings at elevated temperatures K.‐D. Bouzakis, Nectarios Vidakis, Nikolaos Michailidis et al. · Surface and Coatings Technology	Nov 1999	48
40	Industrial-scale deposition of highly adherent CNx films on steel substrates Esteban Broitman, Zsolt Czigány, Grzegorz Greczyński et al. · Surface and Coatings Technology Open access	Apr 2010	47
41	Effect of structure and residual stresses of diamond coated cemented carbide tools on the film adhesion and developed wear mechanisms in milling Georgios Skordaris, K.‐D. Bouzakis, Paschalis Charalampous et al. · CIRP Annals	2016	45
42	Influence of Si content on phase stability and mechanical properties of TiAlSiN films grown by AlSi-HiPIMS/Ti-DCMS co-sputtering Tun-Wei Hsu, Grzegorz Greczyński, Robert D. Boyd et al. · Surface and Coatings Technology Open access	Sep 2021	44
43	The inclined impact test: A novel method for the quantification of the adhesion properties of PVD films K.‐D. Bouzakis, Antonios Asimakopoulos, Georgios Skordaris et al. · Wear	21 Feb 2007	44
44	Adaption of graded Cr/CrN-interlayer thickness to cemented carbide substrates' roughness for improving the adhesion of HPPMS PVD films and the cutting performance K.‐D. Bouzakis, S. Makrimallakis, G. Katirtzoglou et al. · Surface and Coatings Technology	16 Sep 2010	44
45	Sputter deposition of crystalline alumina coatings R. Cremer, Klaus Reichert, D. Neuschütz et al. · Surface and Coatings Technology	28 Dec 2002	39
46	Low-temperature growth of dense and hard Ti0.41Al0.51Ta0.08N films via hybrid HIPIMS/DC magnetron co-sputtering with synchronized metal-ion irradiation Hanna Fager, Olof Tengstrand, Jun Lu et al. · Journal of Applied Physics Open access	3 Mar 2017	37
47	PVD hard coated reamers in lubricant-free cutting E. Lugscheider, Otto Knotek, C. Barimani et al. · Surface and Coatings Technology	Feb 1999	36
48	Application of low temperature PVD coatings in rolling bearings: tribological tests and experiences with spindle bearing systems A. Igartua, J. Laucirica, Ana Aranzabe et al. · Surface and Coatings Technology	Dec 1996	36
49	Amorphous carbon coatings and their tribological behaviour at high temperatures and in high vacuum T Krumpiegl, Harald Meerkamm, W Fruth et al. · Surface and Coatings Technology	Nov 1999	35
50	Fatigue failure mechanisms of multi- and monolayer physically vapour-deposited coatings in interrupted cutting processes K.‐D. Bouzakis, Nectarios Vidakis, D. Kallinikidis et al. · Surface and Coatings Technology	Oct 1998	35

Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.