Science Explorer Interactive view Map
Institution · Senlis · France

Centre Technique des Industries Mécaniques

In research, Centre Technique des Industries Mécaniques stands highest in Physical Sciences (#11,815 of 12,888 worldwide) and Engineering (#6,227 of 6,636 worldwide), 2022–2025. Relative to its size it is most specialised in Mechanical Engineering and Engineering — Mechanical Engineering is 16.0× its share of world research.

cetim.fr/enROR OpenAlex
World rank, 2022–2025
#23,332
of 28,054 · #26,825 all time
Rank in France
#1,104
of 1,422
Research works
607
▲ 14% vs 2013–17
Citations
6.9k
11.4 per fractional work
Top-10% rate
5.5%
record average 16.5%
Open access
43%
world 28%

What is Centre Technique des Industries Mécaniques known for in research?

The fields where it stands highest, 2022–2025, ranked among every institution above the floor in each field.

FieldWorld rankWhere that sitsTop-10% rateWorksAll time
Physical SciencesDomain #11,815 of 12,888 5.5%101 #14493
EngineeringField #6,227 of 6,636 5.6%84 #8382

Each strip is that field’s whole ranked pool, with the notch where Centre Technique des Industries Mécaniques sits in it, in the colour of the band that rank falls in. The track under the rate is the rate itself: it carries no world mark, because the world rate differs by field (from about 6% to 21% in this record).

What does Centre Technique des Industries Mécaniques specialise in?

Where its research is concentrated relative to its size: Mechanical Engineering takes 16.0× the share of its output that it takes of world research.

  1. Mechanical EngineeringSubfield · 36.0 works16×
  2. EngineeringField · 83.9 works4.6×
← less than its size predicts1×more →

Location quotient, a volume reading rather than an impact one. It surfaces small, lopsided specialities.

Field profile

Location quotient across every field it publishes in: outside the ring is more than an institution of this size would be expected to publish, inside it is less.

Agricultural and Biological Sciences: 0.18× its world share, 1 worksAgricultural and Bio…Biochemistry, Genetics and Molecular Biology: 0.03× its world share, 0 worksBiochemistry, Geneti…Pharmacology, Toxicology and Pharmaceutics: 0.15× its world share, 0 worksPharmacology, Toxico…Chemical Engineering: 1.51× its world share, 1 worksChemical EngineeringChemistry: 0.22× its world share, 0 worksChemistryComputer Science: 0.42× its world share, 4 worksComputer ScienceEarth and Planetary Sciences: 0.18× its world share, 0 worksEarth and Planetary …Energy: 0.39× its world share, 0 worksEnergyEngineering: 4.56× its world share, 84 worksEngineeringEnvironmental Science: 0.23× its world share, 1 worksEnvironmental ScienceMaterials Science: 2.09× its world share, 9 worksMaterials ScienceMathematics: 0.15× its world share, 0 worksMathematicsPhysics and Astronomy: 0.12× its world share, 0 worksPhysics and AstronomyDentistry: 0.11× its world share, 0 worksDentistryHealth Professions: 1.16× its world share, 4 worksHealth ProfessionsMedicine: 0.16× its world share, 4 worksMedicineArts and Humanities: 0.43× its world share, 2 worksArts and HumanitiesBusiness, Management and Accounting: 0.28× its world share, 1 worksBusiness, Management…Decision Sciences: 0.19× its world share, 0 worksDecision SciencesEconomics, Econometrics and Finance: 0.09× its world share, 0 worksEconomics, Econometr…Psychology: 0.54× its world share, 2 worksPsychologySocial Sciences: 0.52× its world share, 8 worksSocial Sciences1×world share
more than its size predictsabout as predictedless

Rings at 0.5×, 1× and 2×. Widest outward: Engineering, 4.6×. Every wedge is a field page.

Who are the top researchers at Centre Technique des Industries Mécaniques?

Ranked on the composite score, Fabien Lefèbvre, J Delplace and Fédérica Daghia lead among researchers whose main affiliation is Centre Technique des Industries Mécaniques.

  1. 1 Fabien Lefèbvre France · #618,856 worldwide 66 citations · 20 works
  2. 2 J Delplace France · #688,151 worldwide 18 citations · 19 works
  3. 3 Fédérica Daghia France · #1,142,753 worldwide 43 citations · 35 works
  4. 4 H. P. Lieurade France · #1,314,882 worldwide 9 citations · 22 works
All ranked researchers at Centre Technique des Industries Mécaniques

Which keywords describe research at Centre Technique des Industries Mécaniques?

By fractional works in 2022–2025, weighted toward what it does more of than the world: Mechanical Properties, Microstructure, Additive Manufacturing, Material Characterization, Composite Materials, Finite Element Analysis, Process Parameters and Tool Wear.

▲ more of its work than of the world’s◆ about the world’s share▼ less than the world’s

Size is fractional works in 2022–2025 in the topics tagged with each word; colour is the word's share of this institution's work against its share of the world's. The 40 words are chosen for being large and distinctive. Each links to the topic it comes from most.

All 40 words, with their numbers
  1. Mechanical Properties14▲ 12×25 topics
  2. Microstructure9▲ 14×10 topics
  3. Additive Manufacturing8▲ 22×5 topics
  4. Material Characterization7▲ 47×3 topics
  5. Composite Materials6▲ 25×6 topics
  6. Finite Element Analysis6▲ 22×5 topics
  7. Process Parameters5▲ 38×3 topics
  8. Tool Wear5▲ 29×3 topics
  9. Fatigue Crack Closure5▲ 132×1 topic
  10. Fracture Toughness Testing5▲ 132×1 topic
  11. Nonlinear Dynamics5▲ 18×3 topics
  12. Numerical Simulation5▲ 13×6 topics
  13. Vibration Analysis4▲ 14×5 topics
  14. Corrosion4▲ 28×4 topics
  15. Failure Analysis4▲ 37×5 topics
  16. Defect Detection4▲ 26×3 topics
  17. Residual Stress4▲ 62×2 topics
  18. Surface Roughness4▲ 25×4 topics
  19. 3D Printing4▲ 14×2 topics
  20. Heat Transfer4▲ 6.7×6 topics
  21. Metallic Components4▲ 47×1 topic
  22. Process Optimization4▲ 48×2 topics
  23. Selective Laser Melting4▲ 47×1 topic
  24. Laser Welding4▲ 64×2 topics
  25. Welding4▲ 46×2 topics
  26. Polymer Composites4▲ 12×4 topics
  27. Machining4▲ 51×1 topic
  28. Surface Integrity4▲ 51×1 topic
  29. Keyhole Formation3▲ 61×1 topic
  30. Weld Pool Dynamics3▲ 61×1 topic
  31. Hydrogen Embrittlement3▲ 30×2 topics
  32. Loosening Mechanism3▲ 262×1 topic
  33. Microstructural Evolution3▲ 17×3 topics
  34. Steel3▲ 54×2 topics
  35. Threaded Fasteners3▲ 262×1 topic
  36. Fracture Mechanics3▲ 39×3 topics
  37. Applications3▲ 8.6×2 topics
  38. Non-Destructive Testing3▲ 24×3 topics
  39. Stress Analysis3▲ 113×2 topics
  40. Fatigue Fracture3▲ 195×1 topic

Which research topics does Centre Technique des Industries Mécaniques publish most on?

By volume in 2022–2025: Fatigue and fracture mechanics, Additive Manufacturing Materials and Processes, Advanced machining processes and optimization and Welding Techniques and Residual Stresses.

Fatigue and fracture mec…5Fatigue and fracture mechanics: 5 fractional worksAdditive Manufacturing M…4Additive Manufacturing Materials and Processes: 4 fractional worksAdvanced machining proce…4Advanced machining processes and optimization: 4 fractional worksWelding Techniques and R…3Welding Techniques and Residual Stresses: 3 fractional worksEngineering Structural Analysis Methods: 3 fractional worksAdditive Manufacturing and 3D Printing Technologies: 3 fractional worksMechanical Failure Analy…3Mechanical Failure Analysis and Simulation: 3 fractional worksNon-Destructive Testing Techniques: 2 fractional worksMetallurgy and Material Forming: 2 fractional worksGear and Bearing Dynamic…2Gear and Bearing Dynamics Analysis: 2 fractional works
Mechanics of MaterialsMechanical EngineeringAutomotive Engineering

Area is fractional works; colour is the subfield each topic belongs to.

  1. 1 Fatigue and fracture mechanics Mechanics of Materials 5 works
  2. 2 Additive Manufacturing Materials and Processes Mechanical Engineering 4 works
  3. 3 Advanced machining processes and optimization Mechanical Engineering 4 works
  4. 4 Welding Techniques and Residual Stresses Mechanical Engineering 3 works
  5. 5 Engineering Structural Analysis Methods Mechanical Engineering 3 works
  6. 6 Additive Manufacturing and 3D Printing Technologies Automotive Engineering 3 works
  7. 7 Mechanical Failure Analysis and Simulation Mechanical Engineering 3 works
  8. 8 Non-Destructive Testing Techniques Mechanical Engineering 2 works
  9. 9 Metallurgy and Material Forming Mechanics of Materials 2 works
  10. 10 Gear and Bearing Dynamics Analysis Mechanical Engineering 2 works

How open and international is its research?

Against the world’s own shares — the tick on each track. Both are shares of its output, so they sit on one scale and can be read against each other as well as against the world.

openly available42.6%not open57.4%

World: 28% of research is openly available.

with international co-authors12.4%domestic only87.6%

World: 19% is written across borders.

How has Centre Technique des Industries Mécaniques's research output changed?

Output in 2018–2022 was 14% higher than in 2013–2017.

1990200020102020
grewheldshrank

The same series as a ribbon — one cell per year, darker for more. The line above answers how much; this answers when.

Research measures only: rankings here say nothing about teaching, admissions or student experience. Comparable institutions and collaboration partners are in the interactive view on the map.