Institution · DAF Trucks (Netherlands)
Most cited papers from DAF Trucks (Netherlands)
What are the most cited papers from DAF Trucks (Netherlands)?
The most cited paper from DAF Trucks (Netherlands) is "Is Closed-Loop SCR Control Required to Meet Future Emission Targets?" (Frank Willems, Robert Cloudt, Edwin van den Eijnden et al., 2007), with 157 citations. Next come "Real-Time Distributed Economic Model Predictive Control for Complete Vehicle Energy Management" (105) and "Modeling and Identification for High-Performance Robot Control: An RRR-Robotic Arm Case Study" (101).
Showing 50 of 85 papers. Every paper is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Is Closed-Loop SCR Control Required to Meet Future Emission Targets? Frank Willems, Robert Cloudt, Edwin van den Eijnden et al. · SAE technical papers on CD-ROM/SAE technical paper series | 16 Apr 2007 | 157 |
| 2 | Real-Time Distributed Economic Model Predictive Control for Complete Vehicle Energy Management T.C.J. Romijn, M.C.F. Donkers, John Kessels et al. · Energies | 26 Jul 2017 | 105 |
| 3 | Modeling and Identification for High-Performance Robot Control: An RRR-Robotic Arm Case Study Dragan Kostić, B. deJager, Maarten Steinbuch et al. · IEEE Transactions on Control Systems Technology | 26 Oct 2004 | 101 |
| 4 | Cooperative Driving With a Heavy-Duty Truck in Mixed Traffic: Experimental Results Maarten R. I. Nieuwenhuijze, Thijs van Keulen, Sinan Öncü et al. · IEEE Transactions on Intelligent Transportation Systems | 21 Jun 2012 | 99 |
| 5 | Promising results with YXY Diesel components in an ESC test cycle using a PACCAR Diesel engine E. de Jong, Thomas Vijlbrief, Rene Hijkoop et al. · Biomass and Bioenergy | 19 Nov 2011 | 76 |
| 6 | Analysis of the lateral dynamic behaviour of articulated commercial vehicles M. F.J. van de Molengraft-Luijten, Igo J. M. Besselink, R.M.A.F. Verschuren et al. · Vehicle System Dynamics | 2012 | 60 |
| 7 | Determining the von Mises stress power spectral density for frequency domain fatigue analysis including out-of-phase stress components M.H.A. Bonte, Andries de Boer, Rmj René Liebregts · Journal of Sound and Vibration | 24 Jan 2007 | 54 |
| 8 | Appliance of High EGR Rates With a Short and Long Route EGR System on a Heavy Duty Diesel Engine Marc van Aken, Frank Willems, Dirk-Jan de Jong · SAE technical papers on CD-ROM/SAE technical paper series | 16 Apr 2007 | 49 |
| 9 | Generative bill of material processing systems E. A. VAN VEEN, J.C. Wortmann · Production Planning & Control | Jul 1992 | 48 |
| 10 | An Optimal Continuous Time Control Strategy for Active Suspensions with Preview R.G.M. Huisman, Frans E. Veldpaus, H.J.M. VOETS et al. · Vehicle System Dynamics | 1993 | 43 |
| 11 | Experimental assessment of solid particle number Portable Emissions Measurement Systems (PEMS) for heavy-duty vehicles applications Barouch Giechaskiel, Matthias Schwelberger, Christophe Delacroix et al. · Journal of Aerosol Science | 26 Jun 2018 | 40 |
| 12 | Analytical Solution to Energy Management Guaranteeing Battery Life for Hybrid Trucks Thinh H. Pham, J.T.B.A. Kessels, P.P.J. van den Bosch et al. · IEEE Transactions on Vehicular Technology | 23 Sep 2015 | 39 |
| 13 | Optimal Control of Engine Warmup in Hybrid Vehicles Vital van Reeven, Théo Hofman, Frank Willems et al. · Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles | 10 Dec 2014 | 38 |
| 14 | New developments in generative BOM processing systems E. A. VAN VEEN, J.C. Wortmann · Production Planning & Control | Jul 1992 | 36 |
| 15 | Lubrication and frictional analysis of cam–roller follower mechanisms Shivam S Alakhramsing, Matthijn Bas De Rooij, Dirk Jan Schipper et al. · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology | 28 Jun 2017 | 35 |
| 16 | Exposure to Wood Dust Among Carpenters in the Construction Industry in The Netherlands Ton Spee, Esther Van De Rijdt-Van Hoof, Wouter Van Hoof et al. · The Annals of Occupational Hygiene | 28 Nov 2006 | 34 |
| 17 | Mechanisms to control the marketing activities of foreign distributors Charles Pahud de Mortanges, Joost Vossen · International Business Review | 1999 | 33 |
| 18 | Particle Number Measurements Directly from the Tailpipe for Type Approval of Heavy-Duty Engines Barouch Giechaskiel, Tero Lähde, Matthias Schwelberger et al. · Applied Sciences | 18 Oct 2019 | 31 |
| 19 | Engine Dynamometer and Vehicle Performance of a Urea SCR-System for Heavy-Duty Truck Engines Rinie van Helden, Marcel Van Genderen, Marc van Aken et al. · SAE technical papers on CD-ROM/SAE technical paper series | 4 Mar 2002 | 31 |
| 20 | Robust control of a clutch system to prevent judder-induced driveline oscillations Gerrit J. L. Naus, M. A. Beenakkers, R.G.M. Huisman et al. · Vehicle System Dynamics | 15 Oct 2010 | 30 |
| 21 | A Distributed Optimization Approach for Complete Vehicle Energy Management T.C.J. Romijn, M.C.F. Donkers, John Kessels et al. · IEEE Transactions on Control Systems Technology | 23 Jan 2018 | 27 |
| 22 | Diagnosing total quality management—part 2 Bart A. G. Bossink, J.F.B. Gieskes, T. N. M. Pas · Total Quality Management | 1993 | 24 |
| 23 | Experimental Validation of a Dynamic Waste Heat Recovery System Model for Control Purposes Emanuel Feru, Frank Kupper, Chepa Rojer et al. · SAE technical papers on CD-ROM/SAE technical paper series | 8 Apr 2013 | 24 |
| 24 | Preview Estimation and Control for (Semi-) Active Suspensions R.G.M. Huisman, Frans E. Veldpaus, J.G.A.M. van Heck et al. · Vehicle System Dynamics | 1993 | 23 |
| 25 | A Mixed-TEHL Analysis of Cam-Roller Contacts Considering Roller Slip: On the Influence of Roller-Pin Contact Friction Shivam S Alakhramsing, Matthijn Bas De Rooij, Aydar Akchurin et al. · Journal of Tribology | 9 Aug 2018 | 22 |
| 26 | A full numerical solution to the coupled cam–roller and roller–pin contact in heavily loaded cam–roller follower mechanisms Shivam S Alakhramsing, Matthijn Bas De Rooij, Dirk Jan Schipper et al. · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology | 9 Dec 2017 | 21 |
| 27 | On-line energy and Battery Thermal Management for hybrid electric heavy-duty truck Thinh H. Pham, J.T.B.A. Kessels, P.P.J. van den Bosch et al. | Jun 2013 | 21 |
| 28 | Smart vehicle powernet enabling complete vehicle energy management J.T.B.A. Kessels, Jack H.M. Martens, P.P.J. van den Bosch et al. | Oct 2012 | 21 |
| 29 | Tool sharing in an FMS—A feasibility study Gerard J. C. Gaalman, W.M. Nawjin, L.W. Platzer · Engineering Costs and Production Economics | Jul 1987 | 21 |
| 30 | Multi-Level Energy Management for Hybrid Electric Vehicles—Part I Vital van Reeven, Théo Hofman · Vehicles | 15 Feb 2019 | 20 |
| 31 | Game-Theoretic Approach for Complete Vehicle Energy Management Hao Chen, J.T.B.A. Kessels, M.C.F. Donkers et al. | Oct 2014 | 20 |
| 32 | Subcooled flow boiling of ethylene glycol/water mixtures in a bottom-heated tube Wenhua Yu, David M. France, Dileep Singh et al. · International Journal of Heat and Mass Transfer | 15 Feb 2014 | 20 |
| 33 | Extending Energy Management in Hybrid Electric Vehicles with explicit control of gear shifting and start-stop V. van Reeven, Théo Hofman, R.G.M. Huisman et al. | Jun 2012 | 20 |
| 34 | Integrated energy and thermal management for hybrid electric heavy duty trucks H.T. Pham, P.P.J. van den Bosch, J.T.B.A. Kessels et al. | Oct 2012 | 18 |
| 35 | Elastohydrodynamic lubrication of coated finite line contacts Shivam S Alakhramsing, Matthijn Bas De Rooij, Dirk Jan Schipper et al. · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology | 12 Apr 2017 | 17 |
| 36 | Disturbance Rejection in Diesel Engines for Low Emissions and High Fuel Efficiency Chris Criens, Frank Willems, Thijs A. C. van Keulen et al. · IEEE Transactions on Control Systems Technology | 30 Jul 2014 | 16 |
| 37 | Constrained multivariable extremum-seeking for online fuel-efficiency optimization of Diesel engines Robert van der Weijst, Thijs van Keulen, Frank Willems · Control Engineering Practice | 28 Apr 2019 | 15 |
| 38 | The influence of stick–slip transitions in mixed-friction predictions of heavily loaded cam–roller contacts Shivam S Alakhramsing, Matthijn Bas De Rooij, Mark van Drogen et al. · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology | 26 Jul 2018 | 15 |
| 39 | Adaptive ECMS: a Causal Set-theoretic Method for Equivalence Factor Estimation∗∗This work has been carried out with financial support from the FP7 of the European Commission under the grant CONVENIENT(312314). Hao Chen, J.T.B.A. Kessels, Siep Weiland · IFAC-PapersOnLine | 2015 | 15 |
| 40 | Analysis of Transient Noise Behavior of a Truck Diesel Engine Marcel Dhaenens, Gijs van der Linden, Jakob Nehl et al. · SAE technical papers on CD-ROM/SAE technical paper series | 30 Apr 2001 | 15 |
| 41 | An Experimental Methodology for Measuring of Aerodynamic Resistances of Heavy Duty Vehicles in the Framework of European CO 2 Emissions Monitoring Scheme Georgios Fontaras, Panagiota Dilara, Michael Berner et al. · SAE International journal of commercial vehicles | Apr 2014 | 15 |
| 42 | Optimization of Operating Conditions in the Early Direct Injection Premixed Charge Compression Ignition Regime Michael D. Boot, Carlo C. M. Luijten, E.P. Rijk et al. · SAE technical papers on CD-ROM/SAE technical paper series | 13 Sep 2009 | 15 |
| 43 | Forecasting the Dutch heavy truck market R.M.J. Heuts, J.H.J.M. Bronckers · International Journal of Forecasting | 1988 | 15 |
| 44 | Receding Horizon Control for Distributed Energy Management of a Hybrid Heavy-Duty Vehicle with Auxiliaries T.C.J. Romijn, M.C.F. Donkers, J.T.B.A. Kessels et al. · IFAC-PapersOnLine | 2015 | 13 |
| 45 | The process of selecting technology development projects: a practical framework Joost M.J. Herps, Herman H. van Mal, Johannes I.M. Halman et al. · Management Research News | Nov 2003 | 13 |
| 46 | Design of Power Steering Systems for Heavy-Duty Long-Haul Vehicles Emilia Silvaş, Eric Backx, Théo Hofman et al. · IFAC Proceedings Volumes | 2014 | 11 |
| 47 | Automotive ADLS Yanja Dajsuren, Mark van den Brand, Alexander Serebrenik et al. | 25 Jun 2012 | 11 |
| 48 | A dual decomposition approach to complete energy management for a heavy-duty vehicle T.C.J. Romijn, M.C.F. Donkers, J.T.B.A. Kessels et al. | Dec 2014 | 11 |
| 49 | Design and assessment of an eco–driving PMP algorithm for optimal deceleration and gear shifting in trucks B. Wingelaar, G. R. Goncalves Da Silva, Mircea Lazar et al. · 2021 IEEE Conference on Control Technology and Applications (CCTA) | 9 Aug 2021 | 8 |
| 50 | Thermo-Mechanical Fatigue Lifetime Assessment of Spheroidal Cast Iron at Different Thermal Constraint Levels Sepideh Ghodrat, Aakarshit Kalra, Leo A. I. Kestens et al. · Metals | Oct 2019 | 8 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.