Most cited papers from Dr. Babasaheb Ambedkar Technological University
What are the most cited papers from Dr. Babasaheb Ambedkar Technological University?
The most cited paper from Dr. Babasaheb Ambedkar Technological University is "Deep convolutional neural network based medical image classification for disease diagnosis" (Samir S. Yadav, Shivajirao Manikrao Jadhav, 2019), with 1,089 citations. Next come "Technological development in the Stirling cycle engines" (426) and "Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718" (382).
Showing 50 of 59 papers. Every paper with more than 48 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Deep convolutional neural network based medical image classification for disease diagnosis Samir S. Yadav, Shivajirao Manikrao Jadhav · Journal Of Big Data | Dec 2019 | 1,089 |
| 2 | Technological development in the Stirling cycle engines Dhananjay G. Thombare, Suresh Kant Verma · Renewable and Sustainable Energy Reviews | 12 Sep 2006 | 426 |
| 3 | Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718 Raju Shrihari Pawade, Suhas Sitaram Joshi, Prakash K. Brahmankar · International Journal of Machine Tools and Manufacture | 20 Aug 2007 | 382 |
| 4 | Studies on the adsorption of Brilliant Green dye from aqueous solution onto low-cost NaOH treated saw dust Venkat S. Mane, P. V. Vijay Babu · Desalination | 13 Feb 2011 | 261 |
| 5 | Influence of water depth on internal heat and mass transfer in a plastic solar still M.K. Phadatare, Shrey Verma · Desalination | Nov 2007 | 254 |
| 6 | Investigation for the optimal thermohydraulic performance of artificially roughened solar air heaters Suresh Kant Verma, B.N. Prasad · Renewable Energy | May 2000 | 253 |
| 7 | An investigation of cutting forces and surface damage in high-speed turning of Inconel 718 Raju Shrihari Pawade, Suhas Sitaram Joshi, Prakash K. Brahmankar et al. · Journal of Materials Processing Technology | 20 Apr 2007 | 230 |
| 8 | Kinetic and equilibrium studies on the removal of Congo red from aqueous solution using Eucalyptus wood (Eucalyptus globulus) saw dust Venkat S. Mane, P. V. Vijay Babu · Journal of the Taiwan Institute of Chemical Engineers | 5 Dec 2012 | 203 |
| 9 | Experimental investigations on heat transfer and frictional characteristics of a turbulator roughened solar air heater duct Santosh B. Bopche, Madhukar S. Tandale · International Journal of Heat and Mass Transfer | 14 Feb 2009 | 183 |
| 10 | Breast Cancer Diagnosis Using Feature Ensemble Learning Based on Stacked Sparse Autoencoders and Softmax Regression Vinod Jagannath Kadam, Shivajirao Manikrao Jadhav, K. Vijayakumar · Journal of Medical Systems | 3 Jul 2019 | 150 |
| 11 | Valorization of potato peel: a biorefinery approach Pranav Deepak Pathak, Sachin Arvind Mandavgane, Nikhil Manoj Puranik et al. · Critical Reviews in Biotechnology | 14 Jun 2017 | 141 |
| 12 | Performance Investigation of Neural-Network-Based Unified Power-Quality Conditioner Vadirajacharya G. Kinhal, Promod Agarwal, Hari Oam Gupta · IEEE Transactions on Power Delivery | 10 Dec 2010 | 129 |
| 13 | Implementation and Comparison of Speech Emotion Recognition System Using Gaussian Mixture Model (GMM) and K- Nearest Neighbor (K-NN) Techniques Rahul B. Lanjewar, Swarup S. Mathurkar, Nilesh V. Patel · Procedia Computer Science | 2015 | 128 |
| 14 | Determination of material removal rate in wire electro-discharge machining of metal matrix composites using dimensional analysis Nilesh G. Patil, Prakash K. Brahmankar · The International Journal of Advanced Manufacturing Technology | 15 Apr 2010 | 121 |
| 15 | Performance optimization of transcritical CO2 cycle with parallel compression economization Jahar Sarkar, Neeraj Agrawal · International Journal of Thermal Sciences | 31 Dec 2009 | 118 |
| 16 | Some studies into wire electro-discharge machining of alumina particulate-reinforced aluminum matrix composites Nilesh G. Patil, Prakash K. Brahmankar · The International Journal of Advanced Manufacturing Technology | 16 Sep 2009 | 102 |
| 17 | Sustained Release of an Anti-Glaucoma Drug: Demonstration of Efficacy of a Liposomal Formulation in the Rabbit Eye Jayaganesh V. Natarajan, Sujay Chattopadhyay, Marcus Ang et al. · PLoS ONE | 9 Sep 2011 | 98 |
| 18 | Experimental Investigations into Abrasive Waterjet Machining of Carbon Fiber Reinforced Plastic Prasad D. Unde, M. D. Gayakwad, Nilesh G. Patil et al. · Journal of Composites | 29 Sep 2015 | 98 |
| 19 | Iris recognition: an emerging biometric technology S. R. Ganorkar, Ashok A. Ghatol · International Conference on Signal Processing | 16 Feb 2007 | 92 |
| 20 | Some studies on fatigue crack growth rate of aluminum alloy 6061 Bhagwan F. Jogi, Prakash K. Brahmankar, Vikas Nanda et al. · Journal of Materials Processing Technology | 2 Feb 2008 | 90 |
| 21 | Artificial Neural Network based cardiac arrhythmia classification using ECG signal data Shivajirao Manikrao Jadhav, Sanjay Laxmikant Nalbalwar, Ashok A. Ghatol | Aug 2010 | 87 |
| 22 | Characterization and Performance of AlTiN, AlTiCrN, TiN/TiAlN PVD Coated Carbide Tools While Turning SS 304 Atul Prabhakar Kulkarni, Vikas G. Sargade · Materials and Manufacturing Processes | 6 Jan 2015 | 87 |
| 23 | Fake news detection in social media based on sentiment analysis using classifier techniques Sarita V Balshetwar, Abilash RS, Dani Jermisha R · Multimedia Tools and Applications | 11 Mar 2023 | 84 |
| 24 | Molybdenum-based hetero-nanocomposites for cancer therapy, diagnosis and biosensing application: Current advancement and future breakthroughs Namdev L. Dhas, Ritu R. Kudarha, Atul Garkal et al. · Journal of Controlled Release | 18 Dec 2020 | 82 |
| 25 | Thermal barrier coating materials for SI engine Shailesh Dhomne, Ashish Manohar Mahalle · Journal of Materials Research and Technology | 12 Sep 2018 | 78 |
| 26 | A study on mechanical properties in friction stir lap welding of AA 6061-T6 and AISI 304 Raju Prasad Mahto, Rahul Bhoje, Surjya Kanta Pal et al. · Materials Science and Engineering A | 23 Nov 2015 | 76 |
| 27 | Dispersion and Performance Properties of Carbon Nanotubes (CNTs) Based Polymer Composites: A Review Bhagwan F. Jogi, Mayur Sawant, Madan Kulkarni et al. · Journal of Encapsulation and Adsorption Sciences | 2012 | 75 |
| 28 | Research directions in the Internet of Every Things(IoET) Prachi S. Deshpande, Brijesh Iyer | May 2017 | 73 |
| 29 | Health monitoring and tracking system for soldiers using Internet of Things(IoT) Niket Patii, Brijesh Iyer | May 2017 | 72 |
| 30 | Surface integrity and sustainability assessment in high-speed machining of Inconel 718 – An eco-friendly green approach Ganesh S. Kadam, Raju Shrihari Pawade · Journal of Cleaner Production | 23 Jan 2017 | 71 |
| 31 | Automatic detection of Alzheimer’s disease from EEG signals using low-complexity orthogonal wavelet filter banks Digambar Puri, Sanjay Laxmikant Nalbalwar, Anil Bapusa Nandgaonkar et al. · Biomedical Signal Processing and Control | 9 Dec 2022 | 68 |
| 32 | K-means algorithm for the detection and delineation of QRS-complexes in Electrocardiogram S. S. Mehta, Deepak Shete, N. S. Lingayat et al. · IRBM | 29 Nov 2009 | 68 |
| 33 | Towards Detection of Network Anomalies using Machine Learning Algorithms on the NSL-KDD Benchmark Datasets Amol Dattatraya Vibhute, Chandrashekhar Himmatrao Patil, Arjun V. Mane et al. · Procedia Computer Science | 2024 | 65 |
| 34 | Experimental investigation on laser directed energy deposition of functionally graded layers of Ni-Cr-B-Si and SS316L S. Banait, C. P. Paul, A.N. Jinoop et al. · Optics & Laser Technology | 31 Aug 2019 | 64 |
| 35 | i-Pulse: A NLP based novel approach for employee engagement in logistics organization Rachit Garg, Arvind W. Kiwelekar, Laxman D. Netak et al. · International Journal of Information Management Data Insights | 27 Mar 2021 | 63 |
| 36 | Experimental investigation of vortex tube using natural substances Neeraj Agrawal, Sachin S. Naik, Y.P. Gawale · International Communications in Heat and Mass Transfer | 11 Jan 2014 | 63 |
| 37 | Assessment of feasibility of natural coagulants in turbidity removal and modeling of coagulation process Madhukar Vinayak Jadhav, Yogesh Shankar Mahajan · Desalination and Water Treatment | 10 Jul 2013 | 61 |
| 38 | Design and Tuning of Digital Fractional-Order PID Controller for Permanent Magnet DC Motor Manoj D. Patil, Kinhal Vadirajacharya, Swapnil W. Khubalkar · IETE Journal of Research | 28 Jun 2021 | 60 |
| 39 | Detection of common risk factors for diagnosis of cardiac arrhythmia using machine learning algorithm Samir S. Yadav, Shivajirao Manikrao Jadhav · Expert Systems with Applications | 3 Aug 2020 | 58 |
| 40 | IOT Based Water Quality Monitoring System Santosh Konde, Shankar Baburao Deosarkar · SSRN Electronic Journal | 2020 | 57 |
| 41 | Distributed generation deployment: State-of-the-art of distribution system planning in sustainable era Sanjay Kumar Jain, Shilpa Kalambe, Ganga Agnihotri et al. · Renewable and Sustainable Energy Reviews | 21 Apr 2017 | 57 |
| 42 | Effect of Coating Thickness on the Characteristics and Dry Machining Performance of TiN Film Deposited on Cemented Carbide Inserts Using CFUBMS Vikas G. Sargade, S. Gangopadhyay, Soumitra Paul et al. · Materials and Manufacturing Processes | 24 Mar 2011 | 57 |
| 43 | Artificial Neural Network Models based Cardiac Arrhythmia Disease Diagnosis from ECG Signal Data Shivajirao Manikrao Jadhav, Sanjay Laxmikant Nalbalwar, Ashok A. Ghatol · International Journal of Computer Applications | 30 Apr 2012 | 56 |
| 44 | Experimental and modeling studies on microwave-assisted extraction of thymol from seeds of Trachyspermum ammi (TA) Jotiram Gujar, S.J. Wagh, Vilas Gajanan Gaikar · Separation and Purification Technology | 23 Aug 2009 | 56 |
| 45 | Hybrid Power Generation System Using Wind Energy and Solar Energy Ashlesha Yelure, Chaitali Mhaske, Laxmi Rokade et al. · Zenodo (CERN European Organization for Nuclear Research) | 16 Mar 2019 | 55 |
| 46 | Fluorimetric detection of Sn2+ ion in aqueous medium using Salicylaldehyde based nanoparticles and application to natural samples analysis Kishor S. Patil, Prasad G. Mahajan, Shivajirao R. Patil · Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy | 15 Jul 2016 | 55 |
| 47 | Thermal infrared imaging based breast cancer diagnosis using machine learning techniques Samir S. Yadav, Shivajirao Manikrao Jadhav · Multimedia Tools and Applications | 25 Aug 2020 | 54 |
| 48 | Machinability Study of Duplex Stainless Steel 2205 During Dry Turning Gaurav Dinkar Sonawane, Vikas G. Sargade · International Journal of Precision Engineering and Manufacturing | 16 Jan 2020 | 54 |
| 49 | Study on the stability behaviour of two-phase natural circulation systems using a four-equation drift flux model Arun Kumar Nayak, Pulkit Dubey, D.N. Chavan et al. · Nuclear Engineering and Design | 21 Jul 2006 | 53 |
| 50 | Predictive and Prescriptive Analytics in Big-data Era Prachi S. Deshpande, S. C. Sharma, Sateesh Kumar Peddoju · Studies in big data | 2019 | 49 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.