Science Explorer Back to mapMap
Institution · Dynea (Austria)

Most cited papers from Dynea (Austria)

What are the most cited papers from Dynea (Austria)?

The most cited paper from Dynea (Austria) is "Technological performance of formaldehyde-free adhesive alternatives for particleboard industry" (Pia Solt, Johannes Konnerth, Wolfgang Gindl‐Altmutter et al., 2019), with 271 citations. Next come "Adhesives Based on Formaldehyde Condensation Resins" (78) and "Tensile shear strength of UF- and MUF-bonded veneer related to data of adhesives and cell walls measured by nanoindentation" (44).

Showing 50 of 51 papers. Every paper is listed.

Most cited papers, sortable by citations and release date
#Paper
1 Technological performance of formaldehyde-free adhesive alternatives for particleboard industry Pia Solt, Johannes Konnerth, Wolfgang Gindl‐Altmutter et al. · International Journal of Adhesion and Adhesives Open access 20 May 2019 271
2 Adhesives Based on Formaldehyde Condensation Resins Manfred Dunky · Macromolecular Symposia Oct 2004 78
3 Tensile shear strength of UF- and MUF-bonded veneer related to data of adhesives and cell walls measured by nanoindentation Frank Stöckel, Johannes Konnerth, Wolfgang Kantner et al. · Holzforschung 18 Feb 2010 44
4 Calibration model maintenance in melamine resin production: Integrating drift detection, smart sample selection and model adaptation Ramin Nikzad‐Langerodi, Edwin David Lughofer, Carlos Cernuda et al. · Analytica Chimica Acta Open access 8 Feb 2018 37
5 Micromechanical properties of the interphase in pMDI and UF bond lines Frank Stöckel, Johannes Konnerth, Johann Moser et al. · Wood Science and Technology 11 Jun 2011 35
6 Wood adhesives Manfred Dunky, A. Pizzl · Elsevier eBooks Book chapter 2002 32
7 Mineral Wool Insulation Binders Stefan Kowatsch Book chapter 2010 26
8 On-line monitoring of methanol and methyl formate in the exhaust gas of an industrial formaldehyde production plant by a mid-IR gas sensor based on tunable Fabry-Pérot filter technology Andreas Genner, Christoph Gasser, Harald Moser et al. · Analytical and Bioanalytical Chemistry Open access 9 Nov 2016 25
9 Industrial Upscaling of DOPO-Based Phosphonamidates and Phosphonates Derivatives Using Cl 2 Gas as a Chlorinating Agent Khalifah A. Salmeia, Georg Baumgartner, Milijana Jović et al. · Organic Process Research & Development 25 Oct 2018 23
10 Studies on the stability of MF resin solutions: investigations on network formation Jelena Mijatovic, Wolfgang Hubertus Binder, Frank Kubel et al. · Macromolecular Symposia Open access May 2002 22
11 Hybrid adaptive calibration methods and ensemble strategy for prediction of cloud point in melamine resin production Carlos Cernuda, Edwin David Lughofer, Peter Hintenaus et al. · Chemometrics and Intelligent Laboratory Systems 9 May 2013 20
12 Formaldehyde Stefan Kowatsch Book chapter 2010 18
13 PUF panel adhesives doped with additional urea and reinforced by isocyanates Z. Osman, A. Pizzi, Wolfgang Kantner et al. · European Journal of Wood and Wood Products 25 Nov 2004 16
14 Systematic assessment of wheat extenders in condensation resins for plywood production: Part I - physico-chemical adhesive properties Elfriede M. Hogger, Hendrikus W. G. van Herwijnen, Johann Moser et al. · The Journal of Adhesion 14 Jun 2020 15
15 Light microscopic detection of UF adhesive in industrial particle board Eike Mahrdt, Frank Stöckel, Hendrikus W. G. van Herwijnen et al. · Wood Science and Technology 17 Mar 2015 15
16 Adhesive distribution related to mechanical performance of high density wood fibre board Eike Mahrdt, Hendrikus W. G. van Herwijnen, Wolfgang Kantner et al. · International Journal of Adhesion and Adhesives 27 Jun 2017 13
17 Mechanical characterisation of adhesives in particle boards by means of nanoindentation Frank Stöckel, Johannes Konnerth, Wolfgang Kantner et al. · European Journal of Wood and Wood Products Open access 10 Nov 2009 11
18 Comparison between cure kinetics by means of dynamic rheology and DSC of formaldehyde-based wood adhesives Latifeh Nasseri, Catherine Rosenfeld, Pia Solt-Rindler et al. · The Journal of Adhesion 3 Jan 2024 10
19 Verwendung nachwachsender Rohstoffe in Bindemitteln für Holzwerkstoffe Hendrikus W. G. van Herwijnen, E. Fliedner, Walter Heep · Chemie Ingenieur Technik 6 Jul 2010 10
20 Systematic assessment of wheat extenders in formaldehyde-condensation plywood resins: part II – mechanical properties of plywood panels Elfriede M. Hogger, Hendrikus W. G. van Herwijnen, Johann Moser et al. · The Journal of Adhesion 30 Apr 2020 8
21 Laminates Karin Lepedat, Robert M. Wagner, Jürgen Lang Book chapter 2010 7
22 Cold tack of urea formaldehyde resins as an important factor in plywood production Elfriede M. Hogger, Hendrikus W. G. van Herwijnen, Johann Moser et al. · European Journal of Wood and Wood Products Open access 20 Jul 2018 7
23 Legal Issues Related to the Use of Twitter Data in Language Research Paweł Kamocki, Vanessa Hannesschläger, Esther Hoorn et al. · Linköping electronic conference proceedings Conference paperOpen access 8 Jul 2022 6
24 Mungo Platform: A New Wireless Retrofit Solution to Restore Real Time BHP / BHT Data After a Permanently Installed Monitoring System has Failed—A North Sea Case History B. P. Champion, A. W. Strong, Nathan Moodie Conference paper 8 Sep 2009 6
25 A new Approach Towards Environmentally Friendly Desulfurization Børre Knudsen, S. Tjelle, H. Linga · SPE International Conference on Health, Safety and Environment in Oil and Gas Exploration and Production Conference paper 20 Mar 2002 5
26 Describing the sticking phenomenon of aminoplastic resins: introduction of a new test method Alexandra Himsel, Johann Moser, Wolfgang Kantner et al. · Wood Science and Technology 20 Apr 2015 4
27 Technologie der Herstellung von Holzwerkstoffen Manfred Dunky, Peter Niemz Book chapter 2002 3
28 Agricultural residue lignin from novel low-temperature pretreatment as potential raw material for LPF resins Viktoria Leitner, Aufischer Gottfried, Solt-Rindler Pia et al. · Biomass Conversion and Biorefinery 9 Mar 2023 2
29 Influence of cold tack properties on bond performance of cured urea–formaldehyde resin Elfriede M. Hogger, Hendrikus W. G. van Herwijnen, Johann Moser et al. · European Journal of Wood and Wood Products Open access Mar 2019 2
30 Fiber-Coupled MEMS-based NIR Spectrometers for Material Characterization in Industrial Environments Robert Zimmerleiter, Paul Gattinger, Kristina Duswald et al. Conference paperOpen access 17 Mar 2021 1
31 The Interaction of Personal Data, Intellectual Property and Freedom of Expression in the Context of Language Research Aleksei Kelli, Krister Lindén, Paweł Kamocki et al. · Linköping electronic conference proceedings Conference paperOpen access 8 Jul 2022 1
32 Describing the sticking phenomenon of aminoplastic resins: dependency on temperature and relative humidity Alexandra Himsel, Hendrikus W. G. van Herwijnen, Johann Moser et al. · European Journal of Wood and Wood Products 19 Nov 2015 1
33 Application of Innovative Chemical and Mechanical Processing for Treatment of Difficult Production-Waste Sludge Jacquelyn Star, Stephen Williams, Isham Sudardjat et al. Conference paper 5 Mar 2007 1
34 Struktureller Aufbau und wesentliche Einflussfaktoren auf die Eigenschaften ausgewählter Holzwerkstoffe Manfred Dunky, Peter Niemz Book chapter 2002 1
35 Bestimmung von aus Holzwerkstoffen emittierbaren Restmonomeren und anderen flüchtigen Verbindungen Manfred Dunky, Peter Niemz Book chapter 2002 1
36 Dichte Manfred Dunky, Peter Niemz Book chapter 2002 0
37 Holz Manfred Dunky, Peter Niemz Book chapter 2002 0
38 Bindemittel Manfred Dunky, Peter Niemz Book chapter 2002 0
39 Einflussgröße Herstellungsbedingungen Manfred Dunky, Peter Niemz Book chapter 2002 0
40 Formaldehyd-Kondensationsharze Manfred Dunky, Peter Niemz Book chapter 2002 0
41 Industrial Application Examples of Miniature and Robust MEMS-based Spectrometers Robert Zimmerleiter, Thomas Reischer, Kristina Duswald et al. · Optical Sensors and Sensing Congress Conference paper 2020 0
42 Theorie und Grundlagen der Verleimung und der Prüfung von Holzwerkstoffen Manfred Dunky, Peter Niemz Book chapter 2002 0
43 Einsatzmöglichkeiten von Holzwerkstoffen Manfred Dunky, Peter Niemz Book chapter 2002 0
44 Ensembled Self-Adaptive Fuzzy Calibration Models for On-line Cloud Point Prediction Carlos Cernuda, Edwin David Lughofer, Peter Hintenaus et al. Conference paperOpen access 2013 0
45 2.5.4 Reliable Online-Prediction of Characteristic Process Parameters by FTNIR-Spectroscopic Analysis Wolfram Summerer, Marcin Pwaliczek, Jürgen Kasberger et al. · Proceedings IMCS 2012 Conference paperOpen access 2012 0
46 Sonstige Bindemittel und Zusatzstoffe Manfred Dunky, Peter Niemz Book chapter 2002 0
47 Eigenschaften ausgewählter Holzwerkstoffe Manfred Dunky, Peter Niemz Book chapter 2002 0
48 Analytik und Prüfverfahren für Bindemittel und Holzwerkstoffe Manfred Dunky, Peter Niemz Book chapter 2002 0
49 Chemische und physikalisch-chemische Untersuchungen an Holzwerkstoffen Manfred Dunky, Peter Niemz Book chapter 2002 0
50 Übersicht zu den Holzwerkstoffen Manfred Dunky, Peter Niemz Book chapter 2002 0

Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.