Institution · Embraer (Brazil)
Most cited papers from Embraer (Brazil)
What are the most cited papers from Embraer (Brazil)?
The most cited paper from Embraer (Brazil) is "Additive Manufacturing of Titanium Alloy for Aircraft Components" (Eckart Uhlmann, Robert Kersting, Tiago Borsoi Klein et al., 2015), with 383 citations. Next come "A survey of industrial augmented reality" (320) and "Effect of void content on the strength of composite laminates" (297).
Showing 50 of 60 papers. Every paper with more than 46 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Additive Manufacturing of Titanium Alloy for Aircraft Components Eckart Uhlmann, Robert Kersting, Tiago Borsoi Klein et al. · Procedia CIRP | 2015 | 383 |
| 2 | A survey of industrial augmented reality Luís Fernando de Souza Cardoso, Flávia Cristina Martins Queiroz Mariano, Ezequiel Roberto Zorzal · Computers & Industrial Engineering | 15 Nov 2019 | 320 |
| 3 | Effect of void content on the strength of composite laminates Sérgio Frascino Müller de Almeida, Zabulon dos Santos Nogueira Neto · Composite Structures | 1994 | 297 |
| 4 | A variable elimination method to improve the parsimony of MLR models using the successive projections algorithm Roberto Kawakami Harrop Galvão, Mário César Ugulino de Araújo, Wallace Duarte Fragoso et al. · Chemometrics and Intelligent Laboratory Systems | 8 Jan 2008 | 256 |
| 5 | Geometric imperfections and lower-bound methods used to calculate knock-down factors for axially compressed composite cylindrical shells Saullo G. P. Castro, Rolf Zimmermann, Mariano Arbelo et al. · Thin-Walled Structures | 21 Oct 2013 | 254 |
| 6 | Forecasting fault events for predictive maintenance using data-driven techniques and ARMA modeling Márcia Lourenço Baptista, Shankar Sankararaman, Ivo Paixão de Medeiros et al. · Computers & Industrial Engineering | 2 Nov 2017 | 245 |
| 7 | Accelerated aging effects on carbon fiber/epoxy composites Ana Paula Cysne Barbosa, Ana Paula Pereira Fulco, Érick S.S. Guerra et al. · Composites Part B Engineering | 10 Nov 2016 | 238 |
| 8 | The effect of RRA on the strength and SCC resistance on AA7050 and AA7150 aluminium alloys Alfredo Oliveira, Marcelo Corbani de Barros, Kátia Regina Cardoso et al. · Materials Science and Engineering A | 11 May 2004 | 200 |
| 9 | An LMI condition for the robust stability of uncertain continuous-time linear systems D.C.W. Ramos, Pedro L. D. Peres · IEEE Transactions on Automatic Control | Apr 2002 | 187 |
| 10 | Trailing-edge flow and noise control using porous treatments Syamir Alihan Showkat Ali, Mahdi Azarpeyvand, Carlos Roberto Ilário da Silva · Journal of Fluid Mechanics | 2 Jul 2018 | 184 |
| 11 | SUAVE: An Open-Source Environment for Multi-Fidelity Conceptual Vehicle Design Trent W. Lukaczyk, Andrew D. Wendorff, Michael R. Colonno et al. | 18 Jun 2015 | 157 |
| 12 | Effects of tungsten carbide thermal spray coating by HP/HVOF and hard chromium electroplating on AISI 4340 high strength steel Marcelino Pereira do Nascimento, Renato Chaves Souza, Ivancy M Miguel et al. · Surface and Coatings Technology | Apr 2001 | 142 |
| 13 | Evaluation of WC–17Co and WC–10Co–4Cr thermal spray coatings by HVOF on the fatigue and corrosion strength of AISI 4340 steel Herman Jacobus Cornelis Voorwald, Renato Chaves Souza, Walter Luís Pigatin et al. · Surface and Coatings Technology | 3 Nov 2004 | 135 |
| 14 | A review on the recent developments in thermal management systems for hybrid-electric aircraft Maria João Pereira Coutinho, David Bento, Alain Souza et al. · Applied Thermal Engineering | 23 Mar 2023 | 127 |
| 15 | Remaining useful life estimation in aeronautics: Combining data-driven and Kalman filtering Márcia Lourenço Baptista, Elsa M. P. Henriques, Ivo Paixão de Medeiros et al. · Reliability Engineering & System Safety | 6 Feb 2018 | 116 |
| 16 | High performance modeling of atmospheric re-entry vehicles Alexandre Martin, Leonardo Scalabrin, Iain D. Boyd · Journal of Physics Conference Series | 9 Feb 2012 | 104 |
| 17 | A methodology to simulate low velocity impact and compression after impact in large composite stiffened panels Agustin Soto, Emilio V. González, P. Maimí et al. · Composite Structures | 25 Jul 2018 | 91 |
| 18 | Cooperative Target Tracking Using Decentralized Particle Filtering and RSS Sensors Stiven Schwanz Dias, Marcelo G. S. Bruno · IEEE Transactions on Signal Processing | 13 May 2013 | 91 |
| 19 | Geyser boiling phenomenon in two-phase closed loop-thermosyphons Cassiano Tecchio, J.L.G. Oliveira, Kleber Vieira de Paiva et al. · International Journal of Heat and Mass Transfer | 2 Apr 2017 | 85 |
| 20 | Buckling of axially compressed CFRP cylinders with and without additional lateral load: Experimental and numerical investigation Regina Khakimova, Saullo G. P. Castro, Dirk Wilckens et al. · Thin-Walled Structures | 10 Jun 2017 | 84 |
| 21 | Reliability analysis of non-linear reinforced concrete frames using the response surface method R.C Soares, Ahmed Mohamed, W. S. Venturini et al. · Reliability Engineering & System Safety | 2002 | 84 |
| 22 | Analytical modelling for residual stresses produced by shot peening Andreza S. Franchim, Valdemir Soares de Campos, Dilermando Nagle Travessa et al. · Materials & Design (1980-2015) | 8 Aug 2008 | 82 |
| 23 | Effect of pre-strain on the fatigue life of 7050-T7451 aluminium alloy Kassim S. Al-Rubaie, Marcio A. Del Grande, Dilermando Nagle Travessa et al. · Materials Science and Engineering A | 16 Feb 2007 | 78 |
| 24 | Cerium conversion coating and sol-gel coating for corrosion protection of the WE43 Mg alloy Gualter Silva Pereira, Oscar Maurício Prada Ramirez, Pedro Renato Tavares Ávila et al. · Corrosion Science | 23 Jul 2022 | 77 |
| 25 | Elastic properties of hygrothermally conditioned glare laminate Edson Cocchieri Botelho, Renato S.M. Almeida, Luiz Cláudio Pardini et al. · International Journal of Engineering Science | 14 Dec 2006 | 73 |
| 26 | A Review of Welding Technologies for Thermoplastic Composites in Aerospace Applications Anahi Pereira da Costa, Edson Cocchieri Botelho, Michelle Leali Costa et al. · LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) | 8 Oct 2012 | 71 |
| 27 | Corrosion resistance of WE43 Mg alloy in sodium chloride solution Gualter Silva Pereira, Guilherme Yuuki Koga, Julián Arnaldo Ávila et al. · Materials Chemistry and Physics | 5 Jul 2021 | 70 |
| 28 | Boundary layer flow interaction with a permeable wall Syamir Alihan Showkat Ali, Mahdi Azarpeyvand, Máté Szőke et al. · Physics of Fluids | Aug 2018 | 70 |
| 29 | The effect of thermal cycles on the mechanical properties of fiber–metal laminates A. Costa, Danielle F. N. R. da Silva, Dilermando Nagle Travessa et al. · Materials & Design (1980-2015) | 28 Jun 2012 | 70 |
| 30 | Fatigue crack growth analysis of pre-strained 7475–T7351 aluminum alloy Kassim S. Al-Rubaie, Emerson Kellem Lana Barroso, Leonardo Barbosa Godefroid · International Journal of Fatigue | 22 Dec 2005 | 70 |
| 31 | Use of PHM Information and System Architecture for Optimized Aircraft Maintenance Planning Leonardo Ramos Rodrigues, João P. P. Gomes, Felipe Ferri et al. · IEEE Systems Journal | 13 Aug 2014 | 69 |
| 32 | Vibration correlation technique for the estimation of real boundary conditions and buckling load of unstiffened plates and cylindrical shells Mariano Arbelo, Sérgio Frascino Müller de Almeida, Maurício Vicente Donadon et al. · Thin-Walled Structures | 6 Mar 2014 | 69 |
| 33 | Uncertainty quantification of aeroelastic stability of composite plate wings using lamination parameters Carl Scarth, Jonathan E. Cooper, Paul M. Weaver et al. · Composite Structures | 20 May 2014 | 66 |
| 34 | Experimental and numerical estimation of buckling load on unstiffened cylindrical shells using a vibration correlation technique Mariano Arbelo, Kaspars Kalniņš, Oļģerts Ozoliņš et al. · Thin-Walled Structures | 14 May 2015 | 66 |
| 35 | A case for Tsai’s Modulus, an invariant-based approach to stiffness Albertino Arteiro et al. · Composite Structures | 8 Jul 2020 | 65 |
| 36 | In-flight testing of loop thermosyphons for aircraft cooling J.L.G. Oliveira, Cassiano Tecchio, Kleber Vieira de Paiva et al. · Applied Thermal Engineering | 15 Dec 2015 | 62 |
| 37 | Microstructural aspects and mechanical properties of friction stir welded AA2024-T3 aluminium alloy sheet Andreza S. Franchim, Fernando Ferreira Fernandez, Dilermando Nagle Travessa · Materials & Design (1980-2015) | 23 Jul 2011 | 62 |
| 38 | Effect of electroless nickel interlayer on the fatigue strength of chromium electroplated AISI 4340 steel Herman Jacobus Cornelis Voorwald, R. Q. Padilha, Mário Costa et al. · International Journal of Fatigue | 8 Sep 2006 | 61 |
| 39 | Production of high melt strength polypropylene by gamma irradiation Ademar Benevolo Lugao, B.W.H. Artel, Adriana Yoshiga et al. · Radiation Physics and Chemistry | 6 May 2007 | 60 |
| 40 | Influence of injection parameters on defects formation in die casting Al12Si1,3Cu alloy: Experimental results and numeric simulation Guilherme Ourique Verran, Rui Patrick Konrad Mendes, Marco Rossi · Journal of Materials Processing Technology | 19 Apr 2006 | 60 |
| 41 | Climatology and modeling of ionospheric scintillations and irregularity zonal drifts at the equatorial anomaly crest region M. T. A. H. Muella, Marcelo H. Duarte-Silva, Alison de Oliveira Moraes et al. · Annales Geophysicae | 8 Nov 2017 | 59 |
| 42 | Thermal dispersion in porous media as a function of the solid–fluid conductivity ratio Marcos H. J. Pedras, Marcelo J.S. de Lemos · International Journal of Heat and Mass Transfer | 13 Jun 2008 | 59 |
| 43 | Dynamic aircraft recovery problem - An operational decision support framework Joy Vink, Bruno Filipe Santos, Wim J.C. Verhagen et al. · Computers & Operations Research | 14 Jan 2020 | 56 |
| 44 | SUAVE: An Open-Source Environment for Conceptual Vehicle Design and Optimization Emilio M. Botero, Andrew D. Wendorff, Timothy MacDonald et al. · 54th AIAA Aerospace Sciences Meeting | 2 Jan 2016 | 56 |
| 45 | A layered finite element for reinforced concrete beams with bond–slip effects R.S. Oliveira, Márcio Antonio Ramalho, Márcio Roberto Silva Corrêa · Cement and Concrete Composites | Oct 2007 | 56 |
| 46 | Prognostics performance metrics and their relation to requirements, design, verification and cost-benefit Bruno P. Leão, Takashi Yoneyama, Guilherme Conceição Rocha et al. | Oct 2008 | 55 |
| 47 | Cost-Benefit Analysis Methodology for PHM Applied to Legacy Commercial Aircraft Bruno P. Leão, Kevin Fitzgibbon, Lucas C. Puttini et al. · Proceedings - IEEE Aerospace Conference | Mar 2008 | 55 |
| 48 | Linear buckling predictions of unstiffened laminated composite cylinders and cones under various loading and boundary conditions using semi-analytical models Saullo G. P. Castro, Christian Mittelstedt, Francisco Alex Correia Monteiro et al. · Composite Structures | 5 Aug 2014 | 55 |
| 49 | Combination of minimal processing and irradiation to improve the microbiological safety of lettuce (Lactuca sativa, L.) L Goularte, Cecília Geraldes Martins, Isabel Cristina Morales-Aizpurúa et al. · Radiation Physics and Chemistry | 9 Jun 2004 | 55 |
| 50 | Acoustic behavior of a rigidly backed poroelastic layer with periodic resonant inclusions by a multiple scattering approach Thomas Weisser, Jean‐Philippe Groby, Olivier Dazel et al. · The Journal of the Acoustical Society of America | Feb 2016 | 53 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.