| 1 |
Accurate, scalable and integrative haplotype estimation
Olivier Delaneau, Jean‐François Zagury, Matthew R. Robinson et al. · Nature Communications
Open access |
28 Nov 2019 |
736 |
| 2 |
Environmental degradation of structural materials in liquid lead- and lead-bismuth eutectic-cooled reactors
Xing Gong, Michael Philip Short, Thierry Auger et al. · Progress in Materials Science
Open access |
24 Jan 2022 |
441 |
| 3 |
An overview of filtration efficiency through the masks: Mechanisms of the aerosols penetration
A. Tcharkhtchi, Navideh Abbasnezhad, Mohammad Zarbini Seydani et al. · Bioactive Materials
Open access |
11 Aug 2020 |
402 |
| 4 |
3D printing for polymer/particle-based processing: A review
Weiheng Xu, Sayli Jambhulkar, Yuxiang Zhu et al. · Composites Part B Engineering
|
25 Jun 2021 |
321 |
| 5 |
An Overview on Materials and Techniques in 3D Bioprinting Toward Biomedical Application
Saeedeh Vanaei, Mohammad Salemizadeh Parizi, Saeedeh Vanaei et al. · Engineered Regeneration
Open access |
18 Dec 2020 |
309 |
| 6 |
3D printing for rapid sand casting—A review
Meet Upadhyay, Tharmalingam Sivarupan, Mohamed El Mansori · Journal of Manufacturing Processes
Open access |
11 Aug 2017 |
239 |
| 7 |
Classification of building systems for concrete 3D printing
R. Duballet, Olivier Baverel, Justin Dirrenberger · Automation in Construction
Open access |
17 Aug 2017 |
222 |
| 8 |
Permeation barriers for hydrogen embrittlement prevention in metals – A review on mechanisms, materials suitability and efficiency
Nour-Eddine Laadel, Mohamed El Mansori, Nan Kang et al. · International Journal of Hydrogen Energy
Open access |
26 Aug 2022 |
212 |
| 9 |
Poly lactic acid (PLA) polymers: from properties to biomedical applications
Farnoosh Ebrahimi, Hossein Ramezani Dana · International Journal of Polymeric Materials
|
13 Jul 2021 |
212 |
| 10 |
Deep Learning in the Biomedical Applications: Recent and Future Status
Ryad Zemouri, Noureddine Zerhouni, Daniel Racoceanu · Applied Sciences
Open access |
12 Apr 2019 |
194 |
| 11 |
3D Printing‐Enabled Nanoparticle Alignment: A Review of Mechanisms and Applications
Weiheng Xu, Sayli Jambhulkar, Dharneedar Ravichandran et al. · Small
|
27 Jun 2021 |
169 |
| 12 |
Influence of beam diameter on Laser Powder Bed Fusion (L-PBF) process
Mohamed Chérif Sow, Thibaut De Terris, O. Castelnau et al. · Additive manufacturing
Open access |
15 Aug 2020 |
163 |
| 13 |
Comprehensive review of multi-scale Lithium-ion batteries modeling: From electro-chemical dynamics up to heat transfer in battery thermal management system
Magui Mama, Elie Solaï, Tommaso Capurso et al. · Energy Conversion and Management
Open access |
6 Dec 2024 |
144 |
| 14 |
The state of the art for numerical simulations of the effect of the microstructure and its evolution in the metal-cutting processes
Hongguang Liu, Xiang Min Xu, Jun Zhang et al. · International Journal of Machine Tools and Manufacture
|
2 May 2022 |
138 |
| 15 |
Isogeometric shape optimization of smoothed petal auxetic structures via computational periodic homogenization
Zhen-Pei Wang, Leong Hien Poh, Justin Dirrenberger et al. · Computer Methods in Applied Mechanics and Engineering
Open access |
17 May 2017 |
133 |
| 16 |
Genetic-algorithm based framework for lattice support structure optimization in additive manufacturing
Benjamin Vaissier, Jean-Philippe Pernot, Laurent Chougrani et al. · Computer-Aided Design
Open access |
31 Dec 2018 |
127 |
| 17 |
Machinability of inconel 718 during turning: Cutting force model considering tool wear, influence on surface integrity
Bastien Toubhans, Guillaume Fromentin, Fabien Viprey et al. · Journal of Materials Processing Technology
Open access |
20 Jun 2020 |
125 |
| 18 |
Multiscale simulation of grain refinement induced by dynamic recrystallization of Ti6Al4V alloy during high speed machining
Xiang Min Xu, Jun Zhang, Jose Carlos Martins do Outeiro et al. · Journal of Materials Processing Technology
Open access |
9 Jul 2020 |
123 |
| 19 |
Biodegradable PLA/PBS multinanolayer membrane with enhanced barrier performances
Tiphaine Messin, Stéphane Marais, Nadège Follain et al. · Journal of Membrane Science
Open access |
23 Dec 2019 |
117 |
| 20 |
Applications of Sensitized Semiconductors as Heterogeneous Visible-Light Photocatalysts in Organic Synthesis
Daniele Franchi, Zacharias Amara · ACS Sustainable Chemistry & Engineering
Open access |
2 Sep 2020 |
113 |
| 21 |
Toward the understanding of temperature effect on bonding strength, dimensions and geometry of 3D-printed parts
Hamid Reza Vanaei, Kaddour Raissi, Michaël Deligant et al. · Journal of Materials Science
Open access |
13 Jul 2020 |
113 |
| 22 |
Fatigue behaviour of additively manufactured Ti-6Al-4V alloy: The role of defects on scatter and statistical size effect
Viet-Duc Le, Étienne Pessard, Franck Morel et al. · International Journal of Fatigue
Open access |
11 Jul 2020 |
113 |
| 23 |
Influence of the position and size of various deterministic defects on the high cycle fatigue resistance of a 316L steel manufactured by laser powder bed fusion
Olivier Andreau, Étienne Pessard, Imade Koutiri et al. · International Journal of Fatigue
Open access |
7 Oct 2020 |
108 |
| 24 |
Gene expression profiling reveals a conserved microglia signature in larval zebrafish
Julie Mazzolini, Sigrid Le Clerc, Gregoire Morisse et al. · Glia
Open access |
11 Sep 2019 |
100 |
| 25 |
Features of the Postural Sway Signal as Indicators to Estimate and Predict Visually Induced Motion Sickness in Virtual Reality
Jean-Rémy Chardonnet, Mohammad Ali Mirzaei, Frédéric Merienne · International Journal of Human-Computer Interaction
Open access |
27 Jan 2017 |
97 |
| 26 |
Microstructure, wear resistance and electrochemical properties of spherical/non-spherical WC reinforced Inconel 625 superalloy by laser melting deposition
Wanlu Li, Riufeng Di, Ruwang Yuan et al. · Journal of Manufacturing Processes
Open access |
29 Dec 2021 |
96 |
| 27 |
Mobile Manipulators in Industry 4.0: A Review of Developments for Industrial Applications
Nooshin Ghodsian, Khaled Benfriha, Adel Olabi et al. · Sensors
Open access |
22 Sep 2023 |
94 |
| 28 |
Additive Manufacturing of Polymer-Based Composites Using Fused Filament Fabrication (FFF): a Review
M. Ahmadifar, Khaled Benfriha, Mohammadali Shirinbayan et al. · Applied Composite Materials
Open access |
2 Aug 2021 |
91 |
| 29 |
Influence of process parameters on thermal and mechanical properties of polylactic acid fabricated by fused filament fabrication
Hamid Reza Vanaei, Mohammadali Shirinbayan, Michaël Deligant et al. · Polymer Engineering and Science
Open access |
26 May 2020 |
90 |
| 30 |
3D Printing‐Enabled Design and Manufacturing Strategies for Batteries: A Review
Nathan Fonseca et al. · Small
Open access |
27 Jul 2023 |
89 |
| 31 |
3D Printed and Conventional Membranes—A Review
Baye Gueye Thiam, Anouar El Magri, Hamid Reza Vanaei et al. · Polymers
Open access |
3 Mar 2022 |
88 |
| 32 |
Numerical investigation of the effective mechanical properties and local stress distributions of TPMS-based and strut-based lattices for biomedical applications
Chrysoula Chatzigeorgiou, Boris Piotrowski, Yves Chemisky et al. · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials
Open access |
6 Dec 2021 |
88 |
| 33 |
A general multi-scale topology optimisation method for lightweight lattice structures obtained through additive manufacturing technology
Marco Montemurro, Giulia Bertolino, Thibaut Roiné · Composite Structures
Open access |
10 Dec 2020 |
88 |
| 34 |
Solidification microstructure evolution and its correlations with mechanical properties and damping capacities of Mg-Al-based alloy fabricated using wire and arc additive manufacturing
Zihong Wang, Jingfeng Wang, Xin Lin et al. · Journal of Material Science and Technology
|
25 Nov 2022 |
86 |
| 35 |
G-DfAM: a methodological proposal of generative design for additive manufacturing in the automotive industry
Tristan Briard, Frédéric Segonds, Nicolo Zamariola · International Journal on Interactive Design and Manufacturing (IJIDeM)
Open access |
3 Aug 2020 |
86 |
| 36 |
Effect of laser additive manufacturing on the microstructure and mechanical properties of TiB2 reinforced Al-Cu matrix composite
Qian Wang, Xin Lin, Nan Kang et al. · Materials Science and Engineering A
Open access |
8 Mar 2022 |
85 |
| 37 |
A purely frequency based Floquet-Hill formulation for the efficient stability computation of periodic solutions of ordinary differential systems
Louis Guillot, A. J. Lazarus, Olivier Thomas et al. · Journal of Computational Physics
Open access |
29 Apr 2020 |
84 |
| 38 |
High strength Al-Cu-Mg based alloy with synchronous improved tensile properties and hot-cracking resistance suitable for laser powder bed fusion
Quanbo Wang, Nan Kang, Xin Lin et al. · Journal of Material Science and Technology
Open access |
5 Nov 2022 |
83 |
| 39 |
Cavitation control using passive flow control techniques
Mahshid Zaresharif, Florent Ravelet, David J. Kinahan et al. · Physics of Fluids
Open access |
Dec 2021 |
83 |
| 40 |
Drivers and barriers of adaptation initiatives – How societal transformation affects natural hazard management and risk mitigation in Europe
Thomas Thaler, Marie‐Sophie Attems, Mathieu Bonnefond et al. · The Science of The Total Environment
Open access |
23 Aug 2018 |
83 |
| 41 |
Effects of Laser Power and Hatch Orientation on Final Properties of PA12 Parts Produced by Selective Laser Sintering
Anouar El Magri, Salah Eddine Bencaid, Hamid Reza Vanaei et al. · Polymers
Open access |
4 Sep 2022 |
82 |
| 42 |
Multi-user centered design: acceptance, user experience, user research and user testing
Sylvain Fleury, Noémie Chaniaud · Theoretical Issues in Ergonomics Science
Open access |
17 Jan 2023 |
80 |
| 43 |
Prediction and Sensitivity Analysis of Bubble Dissolution Time in 3D Selective Laser Sintering Using Ensemble Decision Trees
Hai‐Bang Ly, Éric Monteiro, Tien-Thinh Le et al. · Materials
Open access |
10 May 2019 |
80 |
| 44 |
Catalytic fast pyrolysis of lignocellulosic biomass: Recent advances and comprehensive overview
Hassan El Bari, Casimir Kalibé Fanezouné, Bogdan Dorneanu et al. · Journal of Analytical and Applied Pyrolysis
Open access |
9 Feb 2024 |
79 |
| 45 |
Synthesis Characterization and Highly Protective Efficiency of Tetraglycidyloxy Pentanal Epoxy Prepolymer as a Potential Corrosion Inhibitor for Mild Steel in 1 M HCl Medium
Rachid Hsissou, Redouane Lachhab, Anouar El Magri et al. · Polymers
Open access |
30 Jul 2022 |
78 |
| 46 |
Machining simulation of Ti6Al4V using coupled Eulerian-Lagrangian approach and a constitutive model considering the state of stress
Xiang Min Xu, Jose Carlos Martins do Outeiro, Jun Zhang et al. · Simulation Modelling Practice and Theory
Open access |
19 Mar 2021 |
77 |
| 47 |
Controlled release from polyurethane films: Drug release mechanisms
Navideh Abbasnezhad, Nader Zirak, Mohammadali Shirinbayan et al. · Journal of Applied Polymer Science
Open access |
17 Oct 2020 |
77 |
| 48 |
Tolerance analysis — Form defects modeling and simulation by modal decomposition and optimization
Lazhar Homri, Edoh Goka, Guillaume Levasseur et al. · Computer-Aided Design
Open access |
3 Jun 2017 |
77 |
| 49 |
3D Bioprinting of Polycaprolactone-Based Scaffolds for Pulp-Dentin Regeneration: Investigation of Physicochemical and Biological Behavior
Zohre Mousavi Nejad, Ali Zamanian, Maryam Saeidifar et al. · Polymers
Open access |
17 Dec 2021 |
74 |
| 50 |
High-cycle fatigue behavior of a laser powder bed fusion additive manufactured Ti-6Al-4V titanium: Effect of pores and tested volume size
Étienne Pessard, Manon Lavialle, Pascal Laheurte et al. · International Journal of Fatigue
Open access |
6 Mar 2021 |
74 |