Science Explorer Interactive view Map
Research facility · Gdansk · Poland

Institute of Fluid Flow-Machinery

In research, Institute of Fluid Flow-Machinery stands highest in Engineering (#2,768 of 6,636 worldwide) and Physical Sciences (#6,251 of 12,888 worldwide), 2022–2025. Relative to its size it is most specialised in Mechanics of Materials and Mechanical Engineering — Mechanics of Materials is 17.0× its share of world research.

imp.gda.pl/enROR OpenAlex
World rank, 2022–2025
#11,641
of 28,054 · #13,836 all time
Rank in Poland
#125
of 318
Research works
1.6k
▲ 9% vs 2013–17
Citations
21k
13.1 per fractional work
Top-10% rate
12.2%
record average 16.5%
Open access
33%
world 28%

What is Institute of Fluid Flow-Machinery known for in research?

The fields where it stands highest, 2022–2025, ranked among every institution above the floor in each field.

FieldWorld rankWhere that sitsTop-10% rateWorksAll time
EngineeringField #2,768 of 6,636 12.8%194 #2993
Physical SciencesDomain #6,251 of 12,888 12.4%253 #7878

Each strip is that field’s whole ranked pool, with the notch where Institute of Fluid Flow-Machinery sits in it, in the colour of the band that rank falls in. The track under the rate is the rate itself: it carries no world mark, because the world rate differs by field (from about 6% to 21% in this record).

What does Institute of Fluid Flow-Machinery specialise in?

Where its research is concentrated relative to its size: Mechanics of Materials takes 17.0× the share of its output that it takes of world research.

  1. Mechanics of MaterialsSubfield · 32.3 works17×
  2. Mechanical EngineeringSubfield · 33.5 works6.8×
← less than its size predicts1×more →

Location quotient, a volume reading rather than an impact one. It surfaces small, lopsided specialities.

Field profile

Location quotient across every field it publishes in: outside the ring is more than an institution of this size would be expected to publish, inside it is less.

Agricultural and Biological Sciences: 0.15× its world share, 2 worksAgricultural and Bio…Biochemistry, Genetics and Molecular Biology: 0.14× its world share, 2 worksBiochemistry, Geneti…Immunology and Microbiology: 0.19× its world share, 0 worksImmunology and Micro…Neuroscience: 0.01× its world share, 0 worksNeurosciencePharmacology, Toxicology and Pharmaceutics: 0.09× its world share, 0 worksPharmacology, Toxico…Chemical Engineering: 4.17× its world share, 4 worksChemical EngineeringChemistry: 0.34× its world share, 1 worksChemistryComputer Science: 0.11× its world share, 2 worksComputer ScienceEarth and Planetary Sciences: 0.66× its world share, 3 worksEarth and Planetary …Energy: 3.87× its world share, 10 worksEnergyEngineering: 4.86× its world share, 194 worksEngineeringEnvironmental Science: 0.82× its world share, 11 worksEnvironmental ScienceMaterials Science: 2.46× its world share, 23 worksMaterials ScienceMathematics: 0.43× its world share, 1 worksMathematicsPhysics and Astronomy: 0.62× its world share, 4 worksPhysics and AstronomyDentistry: 0.06× its world share, 0 worksDentistryHealth Professions: 0.05× its world share, 0 worksHealth ProfessionsMedicine: 0.06× its world share, 3 worksMedicineArts and Humanities: 0.07× its world share, 0 worksArts and HumanitiesBusiness, Management and Accounting: 0.05× its world share, 0 worksBusiness, Management…Decision Sciences: 0.40× its world share, 1 worksDecision SciencesEconomics, Econometrics and Finance: 0.08× its world share, 0 worksEconomics, Econometr…Social Sciences: 0.09× its world share, 3 worksSocial Sciences1×world share
more than its size predictsabout as predictedless

Rings at 0.5×, 1× and 2×. Widest outward: Engineering, 4.9×. Every wedge is a field page.

Who are the top researchers at Institute of Fluid Flow-Machinery?

Ranked on the composite score, A. Jaworek, A. Krupa and Paweł Kudela lead among researchers whose main affiliation is Institute of Fluid Flow-Machinery.

  1. 1 A. Jaworek Poland · #241,677 worldwide 171 citations · 36 works
  2. 2 A. Krupa Poland · #296,052 worldwide 179 citations · 40 works
  3. 3 Paweł Kudela Poland · #327,472 worldwide 122 citations · 36 works
  4. 4 Maciej Radzieński Poland · #372,459 worldwide 158 citations · 29 works
  5. 5 Wiesław Ostachowicz Poland · #391,169 worldwide 361 citations · 121 works
  6. 6 A.T. Sobczyk Poland · #492,041 worldwide 88 citations · 21 works
  7. 7 T. Czech Poland · #590,216 worldwide 76 citations · 15 works
  8. 8 J. Podliński Poland · #673,539 worldwide 59 citations · 16 works
  9. 9 Marek Krawczuk Poland · #674,289 worldwide 156 citations · 45 works
  10. 10 J. Mizeraczyk Poland · #753,153 worldwide 156 citations · 73 works
All ranked researchers at Institute of Fluid Flow-Machinery

Which keywords describe research at Institute of Fluid Flow-Machinery?

By fractional works in 2022–2025, weighted toward what it does more of than the world: Non-Destructive Testing, Damage Detection, Wave Propagation, Heat Transfer, Guided Lamb Waves, Piezoelectric Impedance-Based Health Monitoring, Nonlinear Dynamics and Large-Eddy Simulation.

▲ more of its work than of the world’s◆ about the world’s share▼ less than the world’s

Size is fractional works in 2022–2025 in the topics tagged with each word; colour is the word's share of this institution's work against its share of the world's. The 40 words are chosen for being large and distinctive. Each links to the topic it comes from most.

All 40 words, with their numbers
  1. Non-Destructive Testing22▲ 84×3 topics
  2. Damage Detection17▲ 106×2 topics
  3. Wave Propagation17▲ 57×2 topics
  4. Guided Lamb Waves16▲ 166×1 topic
  5. Heat Transfer16▲ 12×15 topics
  6. Piezoelectric Impedance-Based Health Monitoring16▲ 166×1 topic
  7. Renewable Energy13▲ 3.4×32 topics
  8. Nonlinear Dynamics12▲ 21×2 topics
  9. Large-Eddy Simulation12▲ 24×5 topics
  10. Energy Efficiency12▲ 4.6×17 topics
  11. Sensor Networks11▲ 17×2 topics
  12. Vibration-based Damage Identification11▲ 63×1 topic
  13. Wireless Sensors11▲ 63×1 topic
  14. Nanomaterials11▲ 3.8×10 topics
  15. Mechanical Properties10▲ 3.9×24 topics
  16. Environmental Impact10▲ 2.2×19 topics
  17. Defect Detection9▲ 26×3 topics
  18. Energy Storage9▲ 5.0×7 topics
  19. Structural Health Monitoring9▲ 43×2 topics
  20. Fiber Optic Sensors8▲ 61×1 topic
  21. Optical Fiber8▲ 30×1 topic
  22. Thermodynamic Analysis8▲ 46×3 topics
  23. Numerical Simulation7▲ 9.2×9 topics
  24. Turbulent Flow7▲ 22×4 topics
  25. Composite Materials7▲ 12×6 topics
  26. Vortex Dynamics6▲ 21×3 topics
  27. Additive Manufacturing6▲ 7.4×6 topics
  28. Biochar6▲ 14×4 topics
  29. CFD Simulation6▲ 19×5 topics
  30. Lignocellulosic Biomass6▲ 22×2 topics
  31. Thermal Management6▲ 6.7×5 topics
  32. Fluid-Structure Interaction6▲ 14×5 topics
  33. Renewable Fuels6▲ 18×3 topics
  34. 3D Printing5▲ 8.6×3 topics
  35. Biomass5▲ 18×4 topics
  36. Multiphase Flow5▲ 21×4 topics
  37. Gasification5▲ 27×2 topics
  38. Materials5▲ 7.6×5 topics
  39. Bio-oil5▲ 40×1 topic
  40. Pyrolysis5▲ 26×1 topic

Which research topics does Institute of Fluid Flow-Machinery publish most on?

By volume in 2022–2025: Ultrasonics and Acoustic Wave Propagation, Structural Health Monitoring Techniques, Advanced Fiber Optic Sensors and Thermochemical Biomass Conversion Processes.

Ultrasonics and Acoustic…16Ultrasonics and Acoustic Wave Propagation: 16 fractional worksStructural Health Monitoring Techniques: 11 fractional worksAdvanced Fiber Optic Sensors: 8 fractional worksThermochemical Biomass Conversion Processes: 5 fractional worksThermography and Photoacoustic Techniques: 4 fractional worksNon-Destructive Testing Techniques: 4 fractional worksComputational Fluid Dynamics and Aerodynamics: 4 fractional worksThermodynamic and Exergetic Analyses of Power and Cooling Systems: 4 fractional worksAdditive Manufacturing and 3D Printing Technologies: 3 fractional worksFluid Dynamics and Turbulent Flows: 3 fractional works
Mechanics of MaterialsCivil and Structural EngineeringElectrical and Electronic EngineeringBiomedical Engineering3 others

Area is fractional works; colour is the subfield each topic belongs to.

  1. 1 Ultrasonics and Acoustic Wave Propagation Mechanics of Materials 16 works
  2. 2 Structural Health Monitoring Techniques Civil and Structural Engineering 11 works
  3. 3 Advanced Fiber Optic Sensors Electrical and Electronic Engineering 8 works
  4. 4 Thermochemical Biomass Conversion Processes Biomedical Engineering 5 works
  5. 5 Thermography and Photoacoustic Techniques Mechanics of Materials 4 works
  6. 6 Non-Destructive Testing Techniques Mechanical Engineering 4 works
  7. 7 Computational Fluid Dynamics and Aerodynamics Computational Mechanics 4 works
  8. 8 Thermodynamic and Exergetic Analyses of Power and Cooling Systems Mechanical Engineering 4 works
  9. 9 Additive Manufacturing and 3D Printing Technologies Automotive Engineering 3 works
  10. 10 Fluid Dynamics and Turbulent Flows Computational Mechanics 3 works

How open and international is its research?

Against the world’s own shares — the tick on each track. Both are shares of its output, so they sit on one scale and can be read against each other as well as against the world.

openly available32.6%not open67.4%

World: 28% of research is openly available.

with international co-authors16.8%domestic only83.2%

World: 19% is written across borders.

How has Institute of Fluid Flow-Machinery's research output changed?

Output in 2018–2022 was 9% higher than in 2013–2017.

1990200020102020
grewheldshrank

The same series as a ribbon — one cell per year, darker for more. The line above answers how much; this answers when.

Other research institutions in Gdansk

All research institutions in Gdansk

Research measures only: rankings here say nothing about teaching, admissions or student experience. Comparable institutions and collaboration partners are in the interactive view on the map.