| 1 |
Joining of metal to plastic using friction lap welding
F.C. Liu, Jinsun Liao, Kazuya Nakata · Materials & Design (1980-2015)
|
24 Aug 2013 |
293 |
| 2 |
Effect of inoculum conditioning on hydrogen fermentation and pH effect on bacterial community relevant to hydrogen production
Yasunori Kawagoshi, Naoe Hino, Aya Fujimoto et al. · Journal of Bioscience and Bioengineering
|
Nov 2005 |
177 |
| 3 |
Thermophysical and heat transfer properties of phase change material candidate for waste heat transportation system
Akihide Kaizawa, Nobuhiro Maruoka, Atsushi Kawai et al. · Heat and Mass Transfer
|
14 Jul 2007 |
169 |
| 4 |
Effect of Intermetallic Compound Layer on Tensile Strength of Dissimilar Friction-Stir Weld of a High Strength Mg Alloy and Al Alloy
Naotsugu Yamamoto, Jinsun Liao, Shuhei Watanabe et al. · MATERIALS TRANSACTIONS
Open access |
2009 |
167 |
| 5 |
Corrosion behavior of fine-grained AZ31B magnesium alloy
Jinsun Liao, Makoto Hotta, Naotsugu Yamamoto · Corrosion Science
|
2 May 2012 |
153 |
| 6 |
Interface and properties of the friction stir welded joints of titanium alloy Ti6Al4V with aluminum alloy 6061
Aiping Wu, Zhihua Song, Kazuhiro Nakata et al. · Materials & Design (1980-2015)
|
19 Dec 2014 |
151 |
| 7 |
Characteristics and corrosion resistance of plasma electrolytic oxidation coatings on AZ31B Mg alloy formed in phosphate – Silicate mixture electrolytes
Yo-ichi Mori, Akihiko Koshi, Jinsun Liao et al. · Corrosion Science
|
Aug 2014 |
150 |
| 8 |
Thermal and flow behaviors in heat transportation container using phase change material
Akihide Kaizawa, Hiroomi Kamano, Atsushi Kawai et al. · Energy Conversion and Management
|
27 Nov 2007 |
150 |
| 9 |
Interfacial microstructure and mechanical property of Ti6Al4V/A6061 dissimilar joint by direct laser brazing without filler metal and groove
Zhihua Song, Kazuhiro Nakata, Aiping Wu et al. · Materials Science and Engineering A
|
21 Sep 2012 |
136 |
| 10 |
Activated carbon from municipal waste
Satoshi Nagano, Hajime Tamon, T Adzumi et al. · Carbon
|
2000 |
131 |
| 11 |
Effects of rotational direction and rotation-to-revolution speed ratio in planetary ball milling
Hiroshi Mio, Junya Kano, Fumio Saito et al. · Materials Science and Engineering A
|
Jul 2002 |
128 |
| 12 |
Influence of probe offset distance on interfacial microstructure and mechanical properties of friction stir butt welded joint of Ti6Al4V and A6061 dissimilar alloys
Zhihua Song, Kazuhiro Nakata, Aiping Wu et al. · Materials & Design (1980-2015)
|
21 Dec 2013 |
120 |
| 13 |
Effect of Electrolyte Concentration on the Structure and Corrosion Resistance of Anodic Films Formed on Magnesium through Plasma Electrolytic Oxidation
Sachiko Ono, Shuichi Moronuki, Yo-ichi Mori et al. · Electrochimica Acta
|
23 Apr 2017 |
114 |
| 14 |
Degradation of organophosphoric esters in leachate from a sea-based solid waste disposal site
Yasunori Kawagoshi, Sachiko Nakamura, Isao Fukunaga · Chemosphere
|
Jul 2002 |
114 |
| 15 |
Atmospheric corrosion of two field-exposed AZ31B magnesium alloys with different grain size
Jinsun Liao, Makoto Hotta, Shinichi Motoda et al. · Corrosion Science
|
5 Mar 2013 |
99 |
| 16 |
Nitride Precipitation in Weld HAZs of a Duplex Stainless Steel.
Jinsun Liao · ISIJ International
Open access |
2001 |
88 |
| 17 |
Estrogenic chemicals and estrogenic activity in leachate from municipal waste landfill determined by yeast two-hybrid assay
Yasunori Kawagoshi, Yukiko Fujita, Ikuko Kishi et al. · Journal of Environmental Monitoring
|
23 Jan 2003 |
86 |
| 18 |
Optimum revolution and rotational directions and their speeds in planetary ball milling
Hiroshi Mio, Junya Kano, Fumio Saito et al. · International Journal of Mineral Processing
|
3 Nov 2004 |
81 |
| 19 |
Improved corrosion resistance of a high-strength Mg–Al–Mn–Ca magnesium alloy made by rapid solidification powder metallurgy
Jinsun Liao, Makoto Hotta, Yo-ichi Mori · Materials Science and Engineering A
|
8 Mar 2012 |
81 |
| 20 |
Effect of plasma electrolytic oxidation coating on joining metal to plastic
F.C. Liu, Jinsun Liao, Yefei Gao et al. · Science and Technology of Welding & Joining
|
12 Feb 2015 |
81 |
| 21 |
Enhanced impact toughness of magnesium alloy by grain refinement
Jinsun Liao, Makoto Hotta, Kantaro Kaneko et al. · Scripta Materialia
|
30 Mar 2009 |
81 |
| 22 |
Corrosion products of field-exposed Mg-Al series magnesium alloys
Jinsun Liao, Makoto Hotta · Corrosion Science
|
27 Jul 2016 |
76 |
| 23 |
Technical Feasibility Study of Waste Heat Transportation System Using Phase Change Material from Industry to City
Akihide Kaizawa, Hiroomi Kamano, Atsushi Kawai et al. · ISIJ International
Open access |
2008 |
72 |
| 24 |
Reducing bubbles in friction lap welded joint of magnesium alloy and polyamide
F.C. Liu, Kazuya Nakata, Jinsun Liao et al. · Science and Technology of Welding & Joining
|
3 Jul 2014 |
71 |
| 25 |
Interface microstructural control by probe length adjustment in friction stir welding of titanium and steel lap joint
Yefei Gao, Kazuya Nakata, Kimiaki Nagatsuka et al. · Materials & Design (1980-2015)
|
6 Sep 2014 |
67 |
| 26 |
Effect of biofilm on ennoblement and localized corrosion of stainless steel in fresh dam-water
Jinsun Liao, Hitoshi Fukui, Tetsuya Urakami et al. · Corrosion Science
|
21 Jan 2010 |
66 |
| 27 |
Development of a Compact Magnetorheological Fluid Clutch for Human-Friendly Actuator
Takehito Kikuchi, Kikuko Otsuki, Junji FURUSHO et al. · Advanced Robotics
|
2010 |
62 |
| 28 |
Microstructure at friction stir lap joint interface of pure titanium and steel
Jinsun Liao, Naotsugu Yamamoto, Hong Liu et al. · Materials Letters
|
23 Jul 2010 |
58 |
| 29 |
Microstructural evolution of fusion zone in laser beam welds of pure titanium
Huaidong Liu, Kazuya Nakata, J.X. Zhang et al. · Materials Characterization
|
31 Dec 2011 |
56 |
| 30 |
Microstructural characteristics and mechanical properties in laser beam welds of Ti6Al4V alloy
Huaidong Liu, Kazuya Nakata, Norifumi Yamamoto et al. · Journal of Materials Science
|
15 Sep 2011 |
55 |
| 31 |
The preparation of a solid dispersion powder of indomethacin with crospovidone using a twin-screw extruder or kneader
Yusuke Shibata, Makiko Fujii, Yuka Sugamura et al. · International Journal of Pharmaceutics
|
28 Aug 2008 |
54 |
| 32 |
Dissimilar friction stir lap welding of magnesium to aluminum using plasma electrolytic oxidation interlayer
Yefei Gao, Yoshiaki Morisada, Hidetoshi Fujii et al. · Materials Science and Engineering A
|
11 Nov 2017 |
50 |
| 33 |
Characterization of Fe–Mn–Si–Cr shape memory alloys containing VN precipitates
Hiroshi Kubo, Kimio Nakamura, Susan Farjami et al. · Materials Science and Engineering A
|
28 Apr 2004 |
50 |
| 34 |
Performance evaluation of concrete slabs of existing bridges using neural networks
Kei Kawamura, Ayaho Miyamoto, Dan M. Frangopol et al. · Engineering Structures
|
16 Jul 2003 |
48 |
| 35 |
Influence of texture on strain localization in stir zone of friction stir welded titanium
F.C. Liu, Jinsun Liao, Yefei Gao et al. · Journal of Alloys and Compounds
|
12 Dec 2014 |
48 |
| 36 |
Process Parameters Optimization in Preparing High-Purity Amorphous Silica Originated from Rice Husks
Junko Umeda, Katsuyoshi Kondoh, Yoshisada Michiura · MATERIALS TRANSACTIONS
Open access |
2007 |
46 |
| 37 |
Response time of magnetorheological fluid–based haptic device
Takehito Kikuchi, Junichi Noma, Syuichi Akaiwa et al. · Journal of Intelligent Material Systems and Structures
|
24 Jul 2015 |
45 |
| 38 |
Effects of V addition on improvement of heat shock resistance and wear resistance of Ni–Cr–Mo cast steel brake disc
N. Harada, Masanori TAKUMA, Muneo Tsujikawa et al. · Wear
|
29 Jan 2013 |
44 |
| 39 |
Atmospheric corrosion behavior of field-exposed magnesium alloys: Influences of chemical composition and microstructure
Jinsun Liao, Makoto Hotta · Corrosion Science
|
13 Aug 2015 |
44 |
| 40 |
Horizontal U-Tube Road Heating System using Tunnel Ground Heat
MS Islam, Teruyuki FUKUHARA, Hiroshi Watanabe et al. · Journal of Snow Engineering of Japan
Open access |
2006 |
43 |
| 41 |
Development of Concrete Bridge Rating Prototype Expert System with Machine Learning
Moriyoshi Kushida, Ayaho Miyamoto, Kazuya Kinoshita · Journal of Computing in Civil Engineering
|
Oct 1997 |
43 |
| 42 |
Amorphous carbon coated stainless separator for PEFCs
Yo-ichi Mori, Mao Ueda, Mitsuaki Hashimoto et al. · Surface and Coatings Technology
|
3 Mar 2008 |
40 |
| 43 |
Mechanical properties and strengthening mechanisms in laser beam welds of pure titanium
H Liu, Kazuya Nakata, Norifumi Yamamoto et al. · Science and Technology of Welding & Joining
|
Oct 2011 |
37 |
| 44 |
Texture and its effect on mechanical properties in fiber laser weld of a fine-grained Mg alloy
Lina Yu, Kazuya Nakata, Norifumi Yamamoto et al. · Materials Letters
|
27 Jan 2009 |
35 |
| 45 |
Friction stir welding of pure titanium lap joint
Huaidong Liu, Kazuya Nakata, Norifumi Yamamoto et al. · Science and Technology of Welding & Joining
|
Jul 2010 |
34 |
| 46 |
Microstructural evolution and superplastic behavior in friction stir processed Mg–Li–Al–Zn alloy
F.C. Liu, Ming Jen Tan, Jinsun Liao et al. · Journal of Materials Science
|
28 Aug 2013 |
34 |
| 47 |
Microstructural characteristics and mechanical properties of non-combustive Mg–9Al–Zn–Ca magnesium alloy friction stir welded joints
Lilong Zhou, Kazuya Nakata, Jinsun Liao et al. · Materials & Design (1980-2015)
|
15 Jun 2012 |
34 |
| 48 |
Gas tungsten arc welding of fine-grained AZ31B magnesium alloys made by powder metallurgy
Jinsun Liao, Naotsugu Yamamoto, Kazuhiro Nakata · Materials & Design (1980-2015)
|
7 Dec 2013 |
34 |
| 49 |
Microstructural modification and mechanical property improvement in friction stir zone of thixo-molded AE42 Mg alloy
Lina Yu, Kazuhiro Nakata, Jinsun Liao · Journal of Alloys and Compounds
|
22 Feb 2009 |
33 |
| 50 |
Corrosion resistance of plasma electrolytic oxidation layer of a non-ignitable Mg–Al–Mn–Ca magnesium alloy
Yo-ichi Mori, Akihiko Koshi, Jinsun Liao · Corrosion Science
|
23 Dec 2015 |
32 |