Most cited papers from LyondellBasell (Italy)

LyondellBasell (Italy)

What are the most cited papers from LyondellBasell (Italy)?

The most cited paper from LyondellBasell (Italy) is "Toward a Unified Model Explaining Heterogeneous Ziegler–Natta Catalysis" (Raffaele Credendino, Dario Liguori, Zhiqiang Fan et al., 2015), with 119 citations. Next come "Theoretical Investigation of Active Sites at the Corners of MgCl2 Crystallites in Supported Ziegler–Natta Catalysts" (98) and "Comparison of biodegradability of various polypropylene films containing pro-oxidant additives based on Mn, Mn/Fe or Co" (92).

Published TypeFieldAccess

Showing 50 of 54 papers. Every paper is listed.

Most cited papers, sortable by citations and release date
#	Paper
1	Toward a Unified Model Explaining Heterogeneous Ziegler–Natta Catalysis Raffaele Credendino, Dario Liguori, Zhiqiang Fan et al. · ACS Catalysis	12 Aug 2015	119
2	Theoretical Investigation of Active Sites at the Corners of MgCl2 Crystallites in Supported Ziegler–Natta Catalysts Andrea Correa, Raffaele Credendino, Jochem T. M. Pater et al. · Macromolecules	19 Apr 2012	98
3	Comparison of biodegradability of various polypropylene films containing pro-oxidant additives based on Mn, Mn/Fe or Co Stéphane Fontanella, S. Bonhomme, Jean‐Michel Brusson et al. · Polymer Degradation and Stability	12 Jan 2013	92
4	Thermodynamics of Formation of Uncovered and Dimethyl Ether-Covered MgCl2 Crystallites. Consequences in the Structure of Ziegler–Natta Heterogeneous Catalysts Raffaele Credendino, Jochem T. M. Pater, Andrea Correa et al. · The Journal of Physical Chemistry C	21 Jun 2011	75
5	Isotactic polypropylene/ethylene-co-propylene blends: effects of the copolymer microstructure and content on rheology, morphology and properties of injection moulded samples Loredana D’Orazio, Carlo Mancarella, E. Martuscelli et al. · Polymer	May 1999	61
6	Investigating Phthalate and 1,3-Diether Coverage and Dynamics on the (104) and (110) Surfaces of MgCl2-Supported Ziegler–Natta Catalysts Raffaele Credendino, Dario Liguori, Giampiero Morini et al. · The Journal of Physical Chemistry C	27 Mar 2014	55
7	Structure of Donor Molecule 9,9-Bis(Methoxymethyl)-Fluorene in Ziegler-Natta Catalyst by Infrared Spectroscopy and Quantum Chemical Calculation Luigi Brambilla, Giuseppe Zerbi, Fabrizio Piemontesi et al. · The Journal of Physical Chemistry C	16 Jun 2010	51
8	Modeling of isospecific Ti sites in MgCl2 supported heterogeneous Ziegler-Natta catalysts Luisa Barino, Raimondo Scordamaglia · Macromolecular Theory and Simulations	Jul 1998	43
9	Investigating Alkoxysilane Coverage and Dynamics on the (104) and (110) Surfaces of MgCl2-Supported Ziegler–Natta Catalysts Raffaele Credendino, Jochem T. M. Pater, Dario Liguori et al. · The Journal of Physical Chemistry C	3 Oct 2012	38
10	Effects of MgCl2 Crystallographic Structure on Active Centre Formation in Immobilized Single‐Centre and Ziegler–Natta Catalysts for Ethylene Polymerization Rubin Huang, Federica Malizia, Gianni Pennini et al. · Macromolecular Rapid Communications	25 Sep 2008	38
11	Isotactic polypropylene/ethylene- co -propylene blends: effects of composition on rheology, morphology and properties of injection moulded samples Loredana D’Orazio, Giuliano Cecchin · Polymer	Mar 2001	37
12	Isotactic polypropylene/polystyrene blends: Effects of the addition of a graft copolymer of propylene with styrene Loredana D’Orazio, Roberto Guarino, Carlo Mancarella et al. · Journal of Applied Polymer Science	22 Aug 1997	33
13	Theoretical predictive evaluation of new donor classes in Ziegler-Natta heterogeneous catalysis for propene isospecific polymerization Raimondo Scordamaglia, Luisa Barino · Macromolecular Theory and Simulations	Jul 1998	30
14	Influence of processing and clay type on nanostructure and stability of polypropylene–clay nanocomposites Sahar Al‐Malaika, Husam Sheena, Dieter Fischer et al. · Polymer Degradation and Stability	24 Oct 2013	26
15	Isotactic polypropylene/ethylene-co-propylene blends: Influence of the copolymer microstructure on rheology, morphology, and properties of injection-molded samples Loredana D’Orazio, Carlo Mancarella, E. Martuscelli et al. · Journal of Applied Polymer Science	2 May 1999	26
16	Crystal Structures of Ziegler–Natta Catalyst Supports Federica Malizia, Anna Fait, Giuseppe Cruciani · Chemistry - A European Journal	3 Nov 2011	26
17	Tailoring the properties of polypropylene in the polymerization reactor using polymeric nucleating agents as prepolymers on the Ziegler–Natta catalyst granule Claudio De Rosa, Finizia Auriemma, Oreste Tarallo et al. · Polymer Chemistry	24 Dec 2016	24
18	Penultimate-Unit Effect in Ethene/4-Methyl-1-pentene Copolymerization for a “Sequential” Distribution of Comonomers Simona Losio, Paola Stagnaro, Tiziano Motta et al. · Macromolecules	18 Jan 2008	23
19	Recent Technical Advances in Polypropylene Gabriele Mei, Enrico Beccarini, Tiziana Caputo et al. · Journal of Plastic Film & Sheeting	Apr 2009	22
20	Ethene/Propene Copolymerizations from Metallocene-Based Catalytic Systems: The Role of Comonomer Concentrations Maurizio Stefano Galimberti, Fabrizio Piemontesi, Giovanni Baruzzi et al. · Macromolecular Chemistry and Physics Open access	Jun 2001	17
21	Synthesis and Characterization of Ethylene/1-Olefin Copolymers Obtained by “Single Centre” Catalysis Isabella Camurati, B.T. Cavicchi, Tiziano Dall’Occo et al. · Macromolecular Chemistry and Physics	Mar 2001	17
22	Softening of polyethylene powders at reactor conditions Josef Chmelař, Petr Matuška, Tomáš Gregor et al. · Chemical Engineering Journal	30 May 2013	17
23	Isotactic polypropylene/polymethylmethacrylate blends: Effects of addition of propylene-graft-methylmethacrylate copolymer Loredana D’Orazio, Roberto Guarino, Carlo Mancarella et al. · Journal of Applied Polymer Science	26 Dec 1997	16
24	Pandemic-Driven Development of a Medical-Grade, Economic and Decentralized Applicable Polyolefin Filament for Additive Fused Filament Fabrication Felix Burkhardt, Carl G. Schirmeister, Christian Wesemann et al. · Molecules Open access	15 Dec 2020	15
25	The contribution of high-resolution GC separations in plastic recycling research Delphine Zanella, Monica Romagnoli, Sofia Malcangi et al. · Analytical and Bioanalytical Chemistry Open access	18 Jan 2023	14
26	Organically modified hydrotalcite for compounding and spinning of polyethylene nanocomposites Izabela Dabrowska, Luca Fambri, Alessandro Pegoretti et al. · eXPRESS Polymer Letters Open access	2013	14
27	Morphology, crystallization, and thermal behavior of isotactic polypropylene/polystyrene blends: Effects of the addition of a graft copolymer of propylene with styrene Loredana D’Orazio, Roberto Guarino, Carlo Mancarella et al. · Journal of Applied Polymer Science	13 Jun 1999	13
28	Spinnability of Nanofilled Polypropylene Denis Lorenzi, G. Sartori, Giuseppe Ferrara et al. · Macromolecular Symposia	Mar 2011	12
29	Toward block copolymers from nonliving isospecific single‐site catalytic systems Maurizio Stefano Galimberti, Fabrizio Piemontesi, Laura Alagia et al. · Journal of Polymer Science Part A Polymer Chemistry	8 Apr 2010	12
30	High performance polyolefins: Polymers engineered to meet needs of the 21st century Paolo Galli, J. C. Haylock, Enrico Albizzati et al. · Macromolecular Symposia	Jul 1995	11
31	Isolated Ti(III) Species on the Surface of a Pre-active Ziegler Natta Catalyst Leonora Podvorica, Enrico Salvadori, Fabrizio Piemontesi et al. · Applied Magnetic Resonance Open access	22 Sep 2020	10
32	The effect of a synthetic double layer hydroxide on the rate of II→I phase transformation of poly(1-butene) Carla Marega, Valerio Causin, Ramesh Neppalli et al. · eXPRESS Polymer Letters Open access	2011	10
33	NMR evidence for B(C6F5)3 attack on the inward position of a highly hindered meso ansa-zirconocene Daniela Maggioni, Tiziana Beringhelli, Giuseppe D’Alfonso et al. · Journal of Organometallic Chemistry	15 Dec 2004	10
34	Dimensional accuracy and simulation-based optimization of polyolefins and biocopolyesters for extrusion-based additive manufacturing and steam sterilization. Felix Burkhardt, Carl G. Schirmeister, Christian Wesemann et al. · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials Open access	12 Mar 2024	9
35	Synthesis and Characterization of Syndiotactic Polystyrene-Polyethylene Block Copolymer David Hermann Lamparelli, Vito Speranza, Isabella Camurati et al. · Polymers Open access	16 Apr 2019	9
36	Interactive failure criteria for glass fibre reinforced polypropylene: validation on an industrial part Massimo Nutini, Mario Vitali · International Journal of Crashworthiness	27 Oct 2017	8
37	Patent Information User Groups in Europe join together: Foundation of the Confederacy of European Patent Information User Groups (CEPIUG) Anne-Gaëlle Darmont, Michele Fattori, Gerben Theodorus Wilhelmus Gieling et al. · World Patent Information	21 Jan 2009	8
38	Effects of the addition of a graft copolymer of propylene with styrene on thermal behavior, crystallization, and morphology of isotactic polypropylene Loredana D’Orazio, Roberto Guarino, Carlo Mancarella et al. · Journal of Applied Polymer Science	24 Jan 2000	7
39	Morphology and viscoelastic properties of melt‐spun HDPE/hydrotalcite nanocomposite fibers Luca Fambri, Izabela Dabrowska, Giuseppe Ferrara et al. · Polymer Composites	22 Aug 2014	7
40	Reduction in tactoid size as a means for reinforcing high‐density polyethylene/montmorillonite nanocomposites Carla Marega, Valerio Causin, Antonio Marigo et al. · Journal of Applied Polymer Science	27 May 2009	6
41	Crystallization behavior and morphology of propylene-ethylene copolymers: tailoring properties by molecular catalysis Angelo Giordano, Anna Perfetto, Miriam Scoti et al. · Polymer Open access	11 Apr 2025	5
42	Morphology, crystallization, and thermal behavior of isotactic polypropylene/polymethylmethacrylate blends: Effects of the addition of a graft copolymer of propylene with methylmethacrylate Loredana D’Orazio, Roberto Guarino, Carlo Mancarella et al. · Journal of Applied Polymer Science	2000	5
43	Morphology, crystallization, and thermal behavior of isotactic polypropylene/propylene-g-styrene blends Loredana D’Orazio, Roberto Guarino, Carlo Mancarella et al. · Journal of Applied Polymer Science	2001	5
44	Ziegler-Natta catalytic systems Luigi Cavallo, Jean‐Marie Ducéré, Rosalisa Fedele et al. · Journal of Thermal Analysis and Calorimetry	Oct 2007	5
45	An Approach to the Impact Simulation on Foamed Injection Molded Polypropylene Parts: An Example of Application in the Automotive Industry Massimo Nutini, Markus Franzen, Mario Vitali · Polymers Open access	14 Feb 2023	4
46	Decision tree analysis as a tool to optimise patent current awareness bulletins Elif Doğanavşargil, Michele Fattori · World Patent Information	30 Jan 2008	4
47	Flow-induced crystallization effect on polypropylene with respect to nucleating agents Mulugeta Goa Sellelo · Heliyon Open access	Dec 2022	3
48	(Stress at Break)/(Shore A) Balance in Propylene/Ethylene Elastomers Dino Bacci, Daniele Bigiavi, Gilberto Moscardi · Journal of Macromolecular Science Part B	2 Mar 2009	1
49	Isotactic polypropylene/polystyrene blends: Effects of the addition of a graft copolymer of propylene with styrene L. D'orazio, R. Guarino, C. Mancarella et al. · Journal of Applied Polymer Science	22 Aug 1997	0
50	Morphology, crystallization, and thermal behavior of isotactic polypropylene/polymethylmethacrylate blends: Effects of the addition of a graft copolymer of propylene with methylmethacrylate L. D'Orazio, R. Guarino, C. Mancarella et al. · Journal of Applied Polymer Science	3 Jan 2001	0

Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.