Science Explorer Back to mapMap

Most cited papers from Montanuniversität Leoben

What are the most cited papers from Montanuniversität Leoben?

The most cited paper from Montanuniversität Leoben is "A fracture-resistant high-entropy alloy for cryogenic applications" (Bernd Gludovatz, Anton Hohenwarter, D. Catoor et al., 2014), with 5,773 citations. Next come "Review: current international research into cellulose nanofibres and nanocomposites" (2,417) and "Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures" (1,953).

Showing 50 of 60 papers. Every paper with more than 359 citations is listed.

Most cited papers, sortable by citations and release date
#Paper
1 A fracture-resistant high-entropy alloy for cryogenic applications Bernd Gludovatz, Anton Hohenwarter, D. Catoor et al. · Science 4 Sep 2014 5,773
2 Review: current international research into cellulose nanofibres and nanocomposites Stephen James Eichhorn et al. · Journal of Materials Science 23 Sep 2009 2,417
3 Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures Bernd Gludovatz, Anton Hohenwarter, Keli V.S. Thurston et al. · Nature Communications Open access 2 Feb 2016 1,953
4 Materials become insensitive to flaws at nanoscale: Lessons from nature Huajian Gao, Baohua Ji, Ingomar L. Jäger et al. · Proceedings of the National Academy of Sciences Open access 5 May 2003 1,925
5 Linear optical properties of solids within the full-potential linearized augmented planewave method Claudia Draxl, Jorge O. Sofo · Computer Physics Communications 9 May 2006 1,796
6 Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation Benjamin Schuh, Francisca Méndez Martín, Bernhard Völker et al. · Acta Materialia Open access 23 Jun 2015 1,343
7 Design, Processing, Microstructure, Properties, and Applications of Advanced Intermetallic TiAl Alloys Helmut Clemens, Svea Mayer · Advanced Engineering Materials Open access 19 Nov 2012 1,225
8 Microstructural design of hard coatings P.H. Mayrhofer, Christian Mitterer, Lars Hultman et al. · Progress in Materials Science 19 Apr 2006 1,012
9 Raman spectroscopy of iron oxides and (oxy)hydroxides at low laser power and possible applications in environmental magnetic studies Monika Hanesch · Geophysical Journal International Open access 24 Mar 2009 980
10 Review Article: Stress in thin films and coatings: Current status, challenges, and prospects G. Abadias, Eric Chason, Jozef Kečkéš et al. · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films Open access Mar 2018 859
11 Corporate sustainability strategies: sustainability profiles and maturity levels Rupert J. Baumgartner, Daniela Ebner‐Karestinos · Sustainable Development 4 Feb 2010 849
12 Recent progress in research on tungsten materials for nuclear fusion applications in Europe M. Rieth et al. · Journal of Nuclear Materials Open access 28 Aug 2012 812
13 Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines Konda Gokuldoss Prashanth, Sri Sudha Vijay Keshav Kolla, Jürgen Eckert · Materials Open access 19 Jun 2017 805
14 Package FLUIDS 1. Computer programs for analysis of fluid inclusion data and for modelling bulk fluid properties Ronald J. Bäkker · Chemical Geology Mar 2003 805
15 Mineralized Collagen Fibrils: A Mechanical Model with a Staggered Arrangement of Mineral Particles Ingomar L. Jäger, Peter Fratzl · Biophysical Journal Open access Oct 2000 798
16 Reduction of Iron Oxides with Hydrogen—A Review Daniel Spreitzer, Johannes Leopold Schenk · steel research international Open access 18 Aug 2019 714
17 Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives Joamin González-Gutiérrez, Santiago Cano, Stephan Schuschnigg et al. · Materials Open access 18 May 2018 714
18 Optical Constants and Inelastic Electron-Scattering Data for 17 Elemental Metals Wolfgang Werner, Kathrin Glantschnig, Claudia Draxl · Journal of Physical and Chemical Reference Data Dec 2009 714
19 Osmium isotopic compositions of mantle xenoliths: a global perspective Thomas Meisel, Richard J. Walker, Anthony J. Irving et al. · Geochimica et Cosmochimica Acta Apr 2001 708
20 Band-structure topologies of graphene: Spin-orbit coupling effects from first principles Martin Gmitra, Sergej Konschuh, Christian Ertler et al. · Physical Review B Open access 28 Dec 2009 685
21 Analogue Realizations of Fractional-Order Controllers Igor Podlubný, Ivo Petráš, Blas Manuel Vinagre et al. · Nonlinear Dynamics Jul 2002 626
22 Making sustainable aluminum by recycling scrap: The science of “dirty” alloys Dierk Raabe et al. · Progress in Materials Science Open access 7 Apr 2022 621
23 Self-organized nanostructures in the Ti–Al–N system P.H. Mayrhofer, Anders Hörling, Lennart B. Karlsson et al. · Applied Physics Letters 8 Sep 2003 619
24 Nanomaterials by severe plastic deformation: review of historical developments and recent advances Kaveh Edalati et al. · Materials Research Letters Open access 17 Feb 2022 595
25 Formation of metastable cellular microstructures in selective laser melted alloys Konda Gokuldoss Prashanth, Jürgen Eckert · Journal of Alloys and Compounds 22 Dec 2016 593
26 Lone‐Pair‐Induced Covalency as the Cause of Temperature‐ and Field‐Induced Instabilities in Bismuth Sodium Titanate Denis Schütz, Marco Deluca, Werner Krauss et al. · Advanced Functional Materials 13 Mar 2012 558
27 ElaStic: A tool for calculating second-order elastic constants from first principles Rostam Golesorkhtabar, P. Pavone, Jürgen Spitaler et al. · Computer Physics Communications 20 Mar 2013 556
28 Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting Jyoti Suryawanshi, Konda Gokuldoss Prashanth, S. Scudino et al. · Acta Materialia 13 Jun 2016 551
29 A new view on transformation induced plasticity (TRIP) Franz Dieter Fischer, Gerd Reisner, Ewald A. Werner et al. · International Journal of Plasticity Jun 2000 544
30 Viscoelastic properties of collagen: synchrotron radiation investigations and structural model R. Puxkandl, I. Zizak, Oskar Paris et al. · Philosophical Transactions of the Royal Society B Biological Sciences Open access 28 Feb 2002 523
31 Cell-wall recovery after irreversible deformation of wood Jozef Kečkéš, Ingo Burgert, Klaus Frühmann et al. · Nature Materials 16 Nov 2003 495
32 A further step towards an understanding of size-dependent crystal plasticity: In situ tension experiments of miniaturized single-crystal copper samples Daniel Kiener, W. Grosinger, Gerhard Dehm et al. · Acta Materialia 6 Dec 2007 492
33 In situ observation of dislocation nucleation and escape in a submicrometre aluminium single crystal Sang Ho Oh, Marc Legros, Daniel Kiener et al. · Nature Materials 18 Jan 2009 483
34 Validation of quantitative backscattered electron imaging for the measurement of mineral density distribution in human bone biopsies Paul Roschger, Peter Fratzl, J. Eschberger et al. · Bone Oct 1998 464
35 Self-organization of nanostructures in semiconductor heteroepitaxy Christian Teichert · Physics Reports Aug 2002 462
36 Recognition of peat depositional environments in coal: A review Shifeng Dai, Achim Bechtel, Cortland F. Eble et al. · International Journal of Coal Geology Open access 7 Jan 2020 453
37 Modeling concepts for intermetallic titanium aluminides Fritz Appel, Helmut Clemens, Franz Dieter Fischer · Progress in Materials Science 20 Feb 2016 452
38 FIB damage of Cu and possible consequences for miniaturized mechanical tests Daniel Kiener, Christian Motz, M. Rester et al. · Materials Science and Engineering A 22 Jan 2007 452
39 Mapping amorphous calcium phosphate transformation into crystalline mineral from the cell to the bone in zebrafish fin rays Julia Mahamid, Barbara Aichmayer, Eyal Shimoni et al. · Proceedings of the National Academy of Sciences Open access 22 Mar 2010 450
40 Digitalisation and intelligent robotics in value chain of circular economy oriented waste management – A review Renato Šarc, Alexander Curtis, Lisa Kandlbauer et al. · Waste Management 29 Jun 2019 449
41 Petrogenesis of the Ophiolitic Giant Chromite Deposits of Kempirsai, Kazakhstan: a Study of Solid and Fluid Inclusions in Chromite Frank Melcher, W. Grum, Grigore Simon et al. · Journal of Petrology Oct 1997 437
42 Exploring deep microbial life in coal-bearing sediment down to ~2.5 km below the ocean floor Fumio Inagaki et al. · Science Open access 23 Jul 2015 435
43 Mechanisms controlling the artificial aging of Al–Mg–Si Alloys Stefan Pogatscher, Helmut Antrekowitsch, Harald Leitner et al. · Acta Materialia 5 Mar 2011 434
44 Is the energy density a reliable parameter for materials synthesis by selective laser melting? Konda Gokuldoss Prashanth, S. Scudino, Tapabrata Maity et al. · Materials Research Letters Open access 9 Mar 2017 418
45 Design of Novel β‐Solidifying TiAl Alloys with Adjustable β/B2‐Phase Fraction and Excellent Hot‐Workability Helmut Clemens, Wilfried Wallgram, Sascha Kremmer et al. · Advanced Engineering Materials 24 Jul 2008 417
46 Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase γ-TiAl based alloy Emanuel Schwaighofer, Helmut Clemens, Svea Mayer et al. · Intermetallics Open access 10 Oct 2013 415
47 An algorithm for solving the direct kinematics of general Stewart-Gough platforms Manfred L. Husty · Mechanism and Machine Theory May 1996 409
48 Fungal Planet description sheets: 469-557 Pedro Willem Crous et al. · Persoonia - Molecular Phylogeny and Evolution of Fungi Open access 23 Dec 2016 407
49 Fatigue crack closure: a review of the physical phenomena Reinhard Pıppan, Anton Hohenwarter · Fatigue & Fracture of Engineering Materials & Structures Open access Feb 2017 393
50 The osmium isotopic composition of the Earth's primitive upper mantle Thomas Meisel, Richard J. Walker, John W. Morgan · Nature Oct 1996 392

Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.