Institution · Montupet (France)
Most cited papers from Montupet (France)
What are the most cited papers from Montupet (France)?
The most cited paper from Montupet (France) is "Kinetic modeling of polyurethane pyrolysis using non-isothermal thermogravimetric analysis" (Ghassan Jomaa, Patrick Goblet, Christophe Coquelet et al., 2015), with 62 citations. Next come "The microstructure and precipitation kinetics of a cast aluminium alloy" (41) and "Thermomechanical behavior of resin bonded foundry sand cores during casting" (40).
Showing 41 of 41 papers. Every paper is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Kinetic modeling of polyurethane pyrolysis using non-isothermal thermogravimetric analysis Ghassan Jomaa, Patrick Goblet, Christophe Coquelet et al. · Thermochimica Acta | 14 May 2015 | 62 |
| 2 | The microstructure and precipitation kinetics of a cast aluminium alloy D. Ovono Ovono, I. Guillot, D. Massinon · Scripta Materialia | 19 May 2006 | 41 |
| 3 | Thermomechanical behavior of resin bonded foundry sand cores during casting Hiba Bargaoui, Farida Azzouz, Delphine Thibault et al. · Journal of Materials Processing Technology | 16 Mar 2017 | 40 |
| 4 | Determination of the activation energy in a cast aluminium alloy by TEM and DSC D. Ovono Ovono, I. Guillot, D. Massinon · Journal of Alloys and Compounds | 26 Jul 2006 | 36 |
| 5 | Study on low-cycle fatigue behaviours of the aluminium cast alloys D. Ovono Ovono, I. Guillot, D. Massinon · Journal of Alloys and Compounds | 6 Dec 2006 | 36 |
| 6 | Fundamental study of exit burr formation mechanisms during orthogonal cutting of AlSi aluminium alloy Tristan Régnier, Guillaume Fromentin, Bertrand Marcon et al. · Journal of Materials Processing Technology | 24 Feb 2018 | 35 |
| 7 | Precipitation Kinetics and Evaluation of the Interfacial Mobility of Precipitates in an AlSi7Cu3.5Mg0.15 Cast Alloy with Zr and V Additions Pierre Heugue, Daniel Larouche, Francis Breton et al. · Metals | 11 Jul 2019 | 19 |
| 8 | Multiphase modelling of the growth kinetics of precipitates in Al-Cu alloys during artificial aging Tohid Naseri, Daniel Larouche, Pierre Heugue et al. · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics | 19 Aug 2020 | 16 |
| 9 | Analysis and Modeling of Burr Formation During the Plane Milling of Cast Aluminum Alloy Using Polycrystalline Diamond Tools Clément Bourlet, Guillaume Fromentin, Elias Harika et al. · Journal of Manufacturing Science and Engineering | 28 Jan 2016 | 15 |
| 10 | Influence of Microstructure on the Static and Thermal Fatigue Properties of 319 Alloys P.I. Meyer, D. Massinon, Ph. Guérin et al. · SAE technical papers on CD-ROM/SAE technical paper series | 24 Feb 1997 | 15 |
| 11 | Stabilizing effect of alloying elements on metastable phases in cast aluminum alloys by CALPHAD calculations Anass Assadiki, Vladimir A. Esin, M.J. Bruno et al. · Computational Materials Science | 30 Dec 2017 | 14 |
| 12 | Thermomechanical fatigue and aging of cast aluminum alloy : A link between numerical modeling and microstructural approach I. Guillot, B. Barlas, Georges Cailletaud et al. · ESIS publication | 2002 | 14 |
| 13 | Simulation of the concomitant process of nucleation-growth-coarsening of Al2Cu particles in a 319 foundry aluminum alloy Ricardo Galván-Martínez, Daniel Larouche, Georges Cailletaud et al. · Modelling and Simulation in Materials Science and Engineering | 23 Apr 2015 | 13 |
| 14 | Elastoviscoplasticity with aging in aluminium alloys Georges Cailletaud, C. Depoid, D. Massinon et al. · Kluwer Academic Publishers eBooks | 27 Jan 2006 | 13 |
| 15 | Between no slip and free slip: A new boundary condition for the surface hydrodynamics of a molten metal Kévin Patouillet, Laurent Davoust · Chemical Engineering Science | 27 Nov 2020 | 9 |
| 16 | Fatigue Performance of Fluidized Bed Heat Treated 319 Alloy Diesel Cylinder Heads Sujoy Krishna Chaudhury, Diran Apelian, Philippe Meyer et al. · Metallurgical and Materials Transactions A | 17 Apr 2015 | 9 |
| 17 | Phenomenological Study of Multivariable Effects on Exit Burr Criteria During Orthogonal Cutting of AlSi Alloys Using Principal Components Analysis Tristan Régnier, Guillaume Fromentin, Alain d’Acunto et al. · Journal of Manufacturing Science and Engineering | 9 Jul 2018 | 8 |
| 18 | Low Rm magnetohydrodynamics as a means of measuring the surface shear viscosity of a liquid metal: A first attempt on Galinstan Jules Delacroix, Laurent Davoust, Kévin Patouillet · Review of Scientific Instruments | 2018 | 8 |
| 19 | Microstructure and Mechanical Properties of Heat-Treated B319 Alloy Diesel Cylinder Heads Sujoy Krishna Chaudhury, Diran Apelian, Pimphan A. Meyer et al. · Metallurgical and Materials Transactions A | 31 Mar 2015 | 8 |
| 20 | Analytical Modeling of the Mixed-Mode Growth and Dissolution of Precipitates in a Finite System Tohid Naseri, Daniel Larouche, Rémi Martinez et al. · Metals | 14 Aug 2019 | 6 |
| 21 | In Situ Raman Identification of Corrosion Products on Galvanized Steel Sheets Marie‐Claude Bernard, Anne Hugot le Goff, D. Massinon et al. · Materials science forum | 1992 | 6 |
| 22 | Application of Impedance Spectroscopy to Study the Atmospheric Corrosion of Galvanized Steel Coated with Epoxy Paint A. Amirudin, C. Barreau, D. Massinon et al. · Materials science forum | 1992 | 6 |
| 23 | A Phenomenological Model for Fatigue Life Prediction of Highly Loaded Cylinder Heads B. Barlas, D. Massinon, Pimphan A. Meyer et al. · SAE technical papers on CD-ROM/SAE technical paper series | 3 Apr 2006 | 6 |
| 24 | Modelling of Strain-Controlled Thermomechanical Fatigue Testing of Cast AlSi7Cu3.5Mg0.15 (Mn, Zr, V) Alloy for Different Aging Conditions Pierre Heugue, Daniel Larouche, Francis Breton et al. · Metals | 26 Jul 2022 | 4 |
| 25 | Static Fatigue of SiC/SiC Minicomposites at High Temperatures Up to 1200 °C in Air: Multiscale Approach Jacques Lamon, Adrien Laforêt · Journal of Composites Science | 28 Feb 2021 | 4 |
| 26 | Thermomechanical properties and fracture of resin-bonded-sand cores – Experimental study and application in aluminium foundry Claire Menet, Pascal Reynaud, Gilbert Fantozzi et al. · EPJ Web of Conferences | 2017 | 4 |
| 27 | Tribological Characteristics and Wear Mechanisms of Hypereutectic Alloys D. Massinon, Vlad Denis Constantin, Răzvan Adam et al. · SAE technical papers on CD-ROM/SAE technical paper series | 24 Feb 1997 | 3 |
| 28 | Modelling of Fatigue Damage in Aluminum Cylinder Heads R. Salapete, B. Barlas, E. Nicouleau et al. | 3 Jan 2008 | 3 |
| 29 | Relevance of Low-Rm MHD for Surface Viscosimetry of Liquid Metals Kévin Patouillet, Laurent Davoust, Olivier Doche et al. · IOP Conference Series Materials Science and Engineering | 13 Oct 2018 | 2 |
| 30 | Experimental Investigation and Modelling of Burr Formation during Orthogonal Cutting of A356+0.5Cu Aluminium Alloy Tristan Régnier, Guillaume Fromentin, Jose Carlos Martins do Outeiro et al. · HAL (Le Centre pour la Communication Scientifique Directe) | 2016 | 2 |
| 31 | On the Contribution of Electrochemical Methods in the Study of Corrosion Mechanisms in Automotive Body Steel Sheets D. Massinon, D. Dauchelle, Jean Charbonnier · Materials science forum | 1991 | 2 |
| 32 | Anticorps anticytoplasme de polynucléaire de type diffus (cANCA) et aspergillose pulmonaire semi-invasive avec extension pariétale : 2 observations A.M. Milési, Bertrand Souweine, Martin Soubrier et al. · La Revue de Médecine Interne | May 1992 | 1 |
| 33 | Improved Material Properties for Cast Aluminium Alloys: From the Processes to Life Prediction Modelling Ivan Guillot, D. Massinon, B. Barlas et al. · Materials science forum | 15 Aug 2003 | 1 |
| 34 | MODELLING OF FATIGUE DAMAGE IN ALUMINUM CYLINDER HEADS Raphaël Salapete, B. Barlas, Morin, G. et al. · HAL (Le Centre pour la Communication Scientifique Directe) | 3 Jul 2006 | 0 |
| 35 | Matériaux composites à matrice métallique Al-SiC P. Hottebart, Suzanne Degallaix, H. P. Lieurade et al. · Matériaux & Techniques | 1993 | 0 |
| 36 | Precipitation Kinetics and Evaluation of the Interfacial Mobility of Precipitates in an AlSi7Cu0.5Mg0.3 Cast Alloy Pierre Heugue, Daniel Larouche, Francis Breton et al. · The minerals, metals & materials series | 2020 | 0 |
| 37 | Caractérisation et modélisation de la précipitation d'un alliage d'aluminium 319 Raquel Martínez, I. Guillot, Georges Cailletaud et al. · HAL (Le Centre pour la Communication Scientifique Directe) | 18 Oct 2010 | 0 |
| 38 | Etude de la formation des bavures en coupe orthogonale à l’outil carbure dans un alliage d’Aluminium – Silicium. Tristan Régnier, Guillaume Fromentin, José Outeiro et al. · HAL (Le Centre pour la Communication Scientifique Directe) | 2016 | 0 |
| 39 | Analyse du comportement à la fatigue d'une gamme de composites à matrice aluminium Laurent Couturier, H. P. Lieurade, D. Massinon et al. · Matériaux & Techniques | 2000 | 0 |
| 40 | Low Cycle Fatigue at Room Temperature of Over Ageing Cast Aluminium Alloys Ivan Guillot, Céline Evrard, D. Massinon et al. · Materials science forum | 9 May 2000 | 0 |
| 41 | TEM investigations of aluminum precipitate in eutectic Si of A356 based alloys Zhihong Jia, L. Arnberg, Petter Åsholt et al. | 30 Aug 2008 | 0 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.