Institution · MTU Aero Engines (Germany)
Most cited papers from MTU Aero Engines (Germany)
What are the most cited papers from MTU Aero Engines (Germany)?
The most cited paper from MTU Aero Engines (Germany) is "Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase γ-TiAl based alloy" (Emanuel Schwaighofer, Helmut Clemens, Svea Mayer et al., 2013), with 415 citations. Next come "Influence of the shielding gas flow on the removal of process by-products in the selective laser melting process" (311) and "High throughput electron transfer from carbon dots to chloroplast: a rationale of enhanced photosynthesis" (208).
Showing 50 of 60 papers. Every paper with more than 57 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase γ-TiAl based alloy Emanuel Schwaighofer, Helmut Clemens, Svea Mayer et al. · Intermetallics | 10 Oct 2013 | 415 |
| 2 | Influence of the shielding gas flow on the removal of process by-products in the selective laser melting process Alexander Ladewig, Georg Schlick, Maximilian Fisser et al. · Additive manufacturing | 31 Jan 2016 | 311 |
| 3 | High throughput electron transfer from carbon dots to chloroplast: a rationale of enhanced photosynthesis Sourov Chandra, Saheli Pradhan, Shouvik Mitra et al. · Nanoscale | 2014 | 208 |
| 4 | In and ex situ investigations of the β-phase in a Nb and Mo containing γ-TiAl based alloy Helmut Clemens, H.F. Chladil, Wilfried Wallgram et al. · Intermetallics | 14 May 2008 | 184 |
| 5 | LARGE-EDDY SIMULATION FOR ACOUSTICS Claus D. Wagner, Thomas Hüttl, Pierre Sagaut · Cambridge University Press eBooks | 15 Jan 2007 | 182 |
| 6 | Noncontact vibration measurements on compressor rotor blades M. Zielinski, Gerhard Ziller · Measurement Science and Technology | 16 Jun 2000 | 165 |
| 7 | Quantitative experimental determination of the solid solution hardening potential of rhenium, tungsten and molybdenum in single-crystal nickel-based superalloys E. Fleischmann, Michael K. Miller, Ernst E. Affeldt et al. · Acta Materialia | 31 Jan 2015 | 164 |
| 8 | Laser Beam Build-Up Welding: Precision in Repair, Surface Cladding, and Direct 3D Metal Deposition Steffen Nowotny, Siegfried Scharek, Eckhard Beyer et al. · Journal of Thermal Spray Technology | 24 Apr 2007 | 163 |
| 9 | Modelling and analysis of the oxidation influence on creep behaviour of thin-walled structures of the single-crystal nickel-base superalloy René N5 at 980 °C Matthias Bensch, Johannes Preußner, Rainer Hüttner et al. · Acta Materialia | 12 Dec 2009 | 142 |
| 10 | Modelling of High Temperature Oxidation of Alumina-Forming Single-Crystal Nickel-Base Superalloys Matthias Bensch, Atsushi Sato, Nils Warnken et al. · Acta Materialia | 11 Aug 2012 | 133 |
| 11 | Effects of Vortex Generator Application on the Performance of a Compressor Cascade Alexander Hergt, Robert K. Meyer, Karl Heinz Engel · Journal of Turbomachinery | 8 Nov 2012 | 122 |
| 12 | Stall Inception and the Prospects for Active Control in Four High-Speed Compressors I. J. Day, Thomas Breuer, J. F. Escuret et al. · Journal of Turbomachinery | 1999 | 117 |
| 13 | Electrochemical machining characteristics and resulting surface quality of the nickel-base single-crystalline material LEK94 Markus Bürger, Lisa Koll, Ewald A. Werner et al. · Journal of Manufacturing Processes | 18 Oct 2011 | 112 |
| 14 | Numerical Simulation of the Unsteady Flow Field in an Axial Gas Turbine Rim Seal Configuration Ralf Jakoby, Thomas Zierer, Klas Lindblad et al. | 2004 | 104 |
| 15 | How to Get Component Maps for Aircraft Gas Turbine Performance Calculations Joachim T. Kurzke · Volume 5: Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; General | 10 Jun 1996 | 103 |
| 16 | Influence of grain size and heat treatment on the microstructure and mechanical properties of the nickel-base superalloy U 720 LI Frank Torster, Gundi Baumeister, J. Albrecht et al. · Materials Science and Engineering A | Aug 1997 | 100 |
| 17 | Process monitoring of additive manufacturing by using optical tomography G. Zenzinger, Joachim Bamberg, Alexander Ladewig et al. · AIP conference proceedings | 2015 | 97 |
| 18 | Thermographic crack detection by eddy current excitation G. Zenzinger, Joachim Bamberg, Wilhelm Satzger et al. · Nondestructive Testing And Evaluation | Jun 2007 | 96 |
| 19 | Research and development into a European code-of-practice for strain-controlled thermo-mechanical fatigue testing Peter Hähner, Claudia Rinaldi, Valerio Bicego et al. · International Journal of Fatigue | 25 Mar 2007 | 95 |
| 20 | Surface roughness in laser powder bed fusion – Interdependency of surface orientation and laser incidence S. Rott, Alexander Ladewig, Katrin Friedberger et al. · Additive manufacturing | 6 Jul 2020 | 92 |
| 21 | Experimental and Numerical Study of the Thermal Performance of a Film Cooled Turbine Platform Dominique Charbonnier, Peter Ott, Magnus Jönsson et al. | 2009 | 91 |
| 22 | Miniature Specimen Assessment of Creep of the Single-Crystal Superalloy LEK 94 in the 1000 °C Temperature Range G. Mälzer, R.W. Hayes, Thomas Mack et al. · Metallurgical and Materials Transactions A | Feb 2007 | 90 |
| 23 | An estimation of the incidence of noma in north‐west Nigeria Alexander Fieger, Klaas W. Marck, Raymonde Busch et al. · Tropical Medicine & International Health | May 2003 | 89 |
| 24 | Designing advanced intermetallic titanium aluminide alloys for additive manufacturing David Wimler, Janny Lindemann, Marcel Reith et al. · Intermetallics | 22 Jan 2021 | 88 |
| 25 | Phase-field modeling of the γ′-coarsening behavior in Ni-based superalloys Julia Kundin, Leslie T. Mushongera, Thomas Goehler et al. · Acta Materialia | May 2012 | 88 |
| 26 | Advanced numerical computation of two-dimensional time-dependent free convection in cavities K. Küblbeck, Günter P. Merker, J. Sträub · International Journal of Heat and Mass Transfer | Feb 1980 | 86 |
| 27 | Thickness influence on creep properties for Ni-based superalloy M247LC SX Martin Brunner, Matthias Bensch, Rainer Völkl et al. · Materials Science and Engineering A | May 2012 | 82 |
| 28 | Multistage methods for freight train classification Riko Jacob, Peter Márton, Jens Maue et al. · Networks | 16 Mar 2010 | 79 |
| 29 | Processing 4th generation titanium aluminides via electron beam based additive manufacturing – characterization of microstructure and mechanical properties Marcel Reith, Matthias Franke, Martin Schloffer et al. · Materialia | 18 Sep 2020 | 78 |
| 30 | A Review of FE-FFT-Based Two-Scale Methods for Computational Modeling of Microstructure Evolution and Macroscopic Material Behavior Christian Gierden, Julian Kochmann, Johanna Waimann et al. · Archives of Computational Methods in Engineering | 12 Apr 2022 | 76 |
| 31 | Characterization of phases of aluminized nickel base superalloys Silke Wöllmer, Stefan Zaefferer, Mathias Göken et al. · Surface and Coatings Technology | 28 Feb 2003 | 75 |
| 32 | FEM simulation of the linear friction welding of titanium alloys Julia Sorina-Müller, Markus Rettenmayr, D. Schneefeld et al. · Computational Materials Science | 21 Apr 2010 | 75 |
| 33 | Influence of tungsten and rhenium concentration on creep properties of a second generation superalloy Silke Wöllmer, Torsten Mack, Uwe Glatzel · Materials Science and Engineering A | Dec 2001 | 73 |
| 34 | Adaptive CAD model (re-)construction with THB-splines Gabor D. Kiss, Carlotta Giannelli, Urška Zore et al. · Graphical Models | 13 Apr 2014 | 73 |
| 35 | Influence of bondcoat pre-treatment and surface topology on the lifetime of EB-PVD TBCs Hendrik Lau, Christoph Leyens, Uwe Schulz et al. · Surface and Coatings Technology | 27 Dec 2002 | 72 |
| 36 | Strong structural controllability of linear systems revisited Jan Christian Jarczyk, Ferdinand Svaricek, Benedikt Alt | Dec 2011 | 69 |
| 37 | Improving Efficiency of a High Work Turbine Using Nonaxisymmetric Endwalls— Part I: Endwall Design and Performance T. Germain, Marc G. Nagel, Irene Raab et al. · Journal of Turbomachinery | 12 Jan 2010 | 69 |
| 38 | Ultrasonic online monitoring of additive manufacturing processes based on selective laser melting Hans L. Rieder, Alexander Dillhöfer, Martin Spies et al. · AIP conference proceedings | 2015 | 69 |
| 39 | Alternate Fuels for Use in Commercial Aircraft David L. Daggett, Robert C. Hendricks, Rainer Walther et al. · NASA STI Repository (National Aeronautics and Space Administration) | Apr 2008 | 69 |
| 40 | Clean Sky research and demonstration programmes for next-generation aircraft engines Jean-François Brouckaert, François Mirville, Kevin Phuah et al. · The Aeronautical Journal | 9 Jul 2018 | 68 |
| 41 | Laser welding techniques for titanium alloy sheet Zhang Li, Stefania Gobbi, Ian Norris et al. · Journal of Materials Processing Technology | Mar 1997 | 68 |
| 42 | Advanced User-Friendly Gas Turbine Performance Calculations on a Personal Computer Joachim T. Kurzke · Volume 5: Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; IGTI Scholar Award | 5 Jun 1995 | 68 |
| 43 | Alternative Fuels and Their Potential Impact on Aviation David L. Daggett, R. C. Hendricks, Rainer Walther · NASA Technical Reports Server (NASA) | Oct 2006 | 68 |
| 44 | Laser cladding of the titanium alloy TI6242 to restore damaged blades Karl‐Hermann Richter, Sven Orban, Steffen Nowotny | Oct 2004 | 67 |
| 45 | Intercooled Recuperated Gas Turbine Engine Concept Stefano Boggia, Klaus Rüd | 10 Jul 2005 | 67 |
| 46 | Influence of Rim Seal Purge Flow on the Performance of an Endwall-Profiled Axial Turbine P. Schuepbach, Reza S. Abhari, Martin G. Rose et al. · Journal of Turbomachinery | 21 Oct 2010 | 67 |
| 47 | Experimental and Numerical Investigation of the Influence of Rotor Blades on Hot Gas Ingestion Into the Upstream Cavity of an Axial Turbine Stage Dieter Bohn, Bernd Rudzinski, Norbert Sürken et al. · Volume 3: Heat Transfer; Electric Power; Industrial and Cogeneration | 8 May 2000 | 67 |
| 48 | Effects of Suction and Injection Purge-Flow on the Secondary Flow Structures of a High-Work Turbine P. Schuepbach, Reza S. Abhari, Martin G. Rose et al. · Journal of Turbomachinery | 21 Jan 2010 | 66 |
| 49 | A constitutive model for rate dependent and rate independent inelasticity. Application to IN718 Martin Becker, Hans-Peter Hackenberg · International Journal of Plasticity | 22 Aug 2010 | 62 |
| 50 | Turbulence Measurements in a Multistage Low-Pressure Turbine Andreas Binder, Th. Schroeder, Jean Hourmouziadis · Journal of Turbomachinery | Apr 1989 | 62 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.