Most cited papers from Nanocyl (Belgium)

Nanocyl (Belgium)

What are the most cited papers from Nanocyl (Belgium)?

The most cited paper from Nanocyl (Belgium) is "Inhalation Toxicity of Multiwall Carbon Nanotubes in Rats Exposed for 3 Months" (Lan Ma‐Hock, Silke Treumann, Volker Strauss et al., 2009), with 451 citations. Next come "Influence of carbon nanotube reinforcement on the processing and the mechanical behaviour of carbon fiber/epoxy composites" (439) and "Masterbatch-based multi-walled carbon nanotube filled polypropylene nanocomposites: Assessment of rheological and mechanical properties" (370).

Published TypeFieldAccessCitations

Showing 50 of 64 papers. Every paper is listed.

Most cited papers, sortable by citations and release date
#	Paper
1	Inhalation Toxicity of Multiwall Carbon Nanotubes in Rats Exposed for 3 Months Lan Ma‐Hock, Silke Treumann, Volker Strauss et al. · Toxicological Sciences	7 Jul 2009	451
2	Influence of carbon nanotube reinforcement on the processing and the mechanical behaviour of carbon fiber/epoxy composites Ajay Godara, Luca Mezzo, F. Luizi et al. · Carbon	22 Jun 2009	439
3	Masterbatch-based multi-walled carbon nanotube filled polypropylene nanocomposites: Assessment of rheological and mechanical properties Kalappa Prashantha, J. Soulestin, Marie‐France Lacrampe et al. · Composites Science and Technology Open access	18 Oct 2008	370
4	Interfacial shear strength of a glass fiber/epoxy bonding in composites modified with carbon nanotubes Ajay Godara, Larissa Gorbatikh, Gerhard Kalinka et al. · Composites Science and Technology	15 Apr 2010	306
5	The effect of adding carbon nanotubes to glass/epoxy composites in the fibre sizing and/or the matrix Ashish M. Warrier, Ajay Godara, Olivier Rochez et al. · Composites Part A Applied Science and Manufacturing	16 Jan 2010	217
6	Multi-walled carbon nanotube filled polypropylene nanocomposites based on masterbatch route: Improvement of dispersion and mechanical properties through PP-g-MA addition Kalappa Prashantha, J. Soulestin, Marie‐France Lacrampe et al. · eXPRESS Polymer Letters Open access	2008	201
7	A Novel Strategy to Incorporate Carbon Nanotubes into Thermoplastic Matrices Petra Pötschke, Sven Pegel, Michael Claes et al. · Macromolecular Rapid Communications	28 Dec 2007	175
8	In situ sensing of impact damage in epoxy/glass fiber composites using percolating carbon nanotube networks Limin Gao, Tsu−Wei Chou, Erik T. Thostenson et al. · Carbon	15 Apr 2011	164
9	Multifunctional structural energy storage composite supercapacitors Natasha Shirshova, Hui Juan Qian, Matthieu Houllé et al. · Faraday Discussions Open access	2014	157
10	CH‐π Interactions as the Driving Force for Silicone‐Based Nanocomposites with Exceptional Properties Alexandre Beigbeder, Mathieu Linares, Myriam Devalckenaere et al. · Advanced Materials Open access	12 Feb 2008	148
11	Preparation of High‐Performance Conductive Polymer Fibers through Morphological Control of Networks Formed by Nanofillers Hua Deng, Tetyana Skipa, Emiliano Bilotti et al. · Advanced Functional Materials	7 Apr 2010	136
12	Polyethylene thermal oxidative stabilisation in carbon nanotubes based nanocomposites Sergio Bocchini, Alberto Frache, Giovanni Camino et al. · European Polymer Journal	25 May 2007	112
13	Impact and residual after impact properties of carbon fiber/epoxy composites modified with carbon nanotubes Marcel Siegfried, Carmen Tola, Michael Claes et al. · Composite Structures	2 Feb 2014	110
14	The effect of carbon nanotubes on the damage development in carbon fiber/epoxy composites Niels De Greef, Larissa Gorbatikh, Ajay Godara et al. · Carbon	26 Jun 2011	103
15	Mechanical, electrical and microstructural characterisation of multifunctional structural power composites ES Greenhalgh, Jesper Ankersen, LE Asp et al. · Journal of Composite Materials Open access	7 Oct 2014	97
16	A kinetic study of multi-walled carbon nanotube synthesis by catalytic chemical vapor deposition using a Fe–Co/Al2O3 catalyst Sophie L. Pirard, Sigrid Douven, Christophe Bossuot et al. · Carbon	23 Feb 2007	84
17	Highly conductive polymer composites based on controlled agglomeration of carbon nanotubes Limin Gao, Tsu-Wei Chou, Erik T. Thostenson et al. · Carbon	23 Mar 2010	83
18	From carbon nanotube coatings to high‐performance polymer nanocomposites Stéphane Bredeau, Sophie Peeterbroeck, Daniel Bonduel et al. · Polymer International	27 Sep 2007	72
19	The relationship between the diameter of chemically-functionalized multi-walled carbon nanotubes and their organ biodistribution profiles in vivo Julie Wang, Chiara Fabbro, Enrica Venturelli et al. · Biomaterials	3 Sep 2014	66
20	Influence of additives on the global mechanical behavior and the microscopic strain localization in wood reinforced polypropylene composites during tensile deformation investigated using digital image correlation Ajay Godara, Dierk Raabe, Irmgard Bergmann et al. · Composites Science and Technology	14 Sep 2008	64
21	Compressibility of carbon woven fabrics with carbon nanotubes/nanofibres grown on the fibres Stepan Vladimirovitch Lomov, Larissa Gorbatikh, Željko Kotanjac et al. · Composites Science and Technology	Dec 2010	58
22	Supported metallocene catalysis as an efficient tool for the preparation of polyethylene/carbon nanotube nanocomposites: effect of the catalytic system on the coating morphology Daniel Bonduel, St?phane Bredeau, Michaël Alexandre et al. · Journal of Materials Chemistry Open access	2007	50
23	Influence of the operating conditions on the production rate of multi-walled carbon nanotubes in a CVD reactor Cédric Gommes, Silvia Blacher, Ch. Bossuot et al. · Carbon	2004	50
24	Image analysis characterization of multi-walled carbon nanotubes Cédric Gommes, Silvia Blacher, Karine Masenelli‐Varlot et al. · Carbon Open access	2003	49
25	Release from nanomaterials during their use phase: combined mechanical and chemical stresses applied to simple and multi-filler nanocomposites mimicking wear of nano-reinforced tires Wendel Wohlleben, Jessica Meyer, Julie M. Muller et al. · Environmental Science Nano	2016	47
26	Taguchi analysis of shrinkage and warpage of injection-moulded polypropylene/multiwall carbon nanotubes nanocomposites Kalappa Prashantha, J. Soulestin, Marie‐France Lacrampe et al. · eXPRESS Polymer Letters Open access	2009	45
27	Dispersion of multi-walled carbon nanotubes in biocompatible dispersants Jean‐Pascal Piret, Simon Detriche, R. Vigneron et al. · Journal of Nanoparticle Research	18 Jul 2009	45
28	Toughening of polymerized cyclic butylene terephthalate with carbon nanotubes for use in composites Joris Baets, Ajay Godara, Jacques Devaux et al. · Composites Part A Applied Science and Manufacturing	31 Aug 2008	42
29	Static and dynamic percolation of phenoxy/carbon nanotube nanocomposites Han Zhang, Emiliano Bilotti, Wei Tu et al. · European Polymer Journal	25 Apr 2015	36
30	Morphology and conduction properties of graphite‐filled immiscible PVDF/PPgMA blends Alberto Fina, Zhidong Han, Guido Saracco et al. · Polymers for Advanced Technologies Open access	9 Mar 2012	33
31	Electrical and Dielectric Properties of Multi-Walled Carbon Nanotube Filled Polypropylene Nanocomposites Kalappa Prashantha, J. Soulestin, Marie‐France Lacrampe et al. · Polymers and Polymer Composites	Nov 2010	31
32	Carbon Fiber Composites Based on Multi‐Phase Epoxy/PES Matrices with Carbon Nanotubes: Morphology and Interlaminar Fracture Toughness Characterization Nakul Prasad, Carmen Tola, Magali Coulaud et al. · Advanced Engineering Materials	28 Jun 2016	29
33	Fracture behavior of carbon nanotube/carbon microfiber hybrid polymer composites Noa Lachman, Hui Juan Qian, Matthieu Houllé et al. · Journal of Materials Science	8 Apr 2013	28
34	Carbon nanotubes modified with fluorescein derivatives for pH nanosensing Giacomo Ghini, Cosimo Trono, Ambra E. Giannetti et al. · Sensors and Actuators B Chemical	13 Oct 2012	27
35	Toughening of isothermally polymerized cyclic butylene terephthalate for use in composites Joris Baets, Ajay Godara, Jacques Devaux et al. · Polymer Degradation and Stability	28 Nov 2009	27
36	Unpredictable dispersion states of MWNTs in HDPE: A comparative and comprehensive study Pierre Verge, Samira Benali, Leïla Bonnaud et al. · European Polymer Journal	14 Feb 2012	25
37	Fire-retardant applications of polymer–carbon nanotubes composites: improved barrier effect and synergism C. Dewaghe, Chun Yee Lew, Michael Claes et al. · Elsevier eBooks Book chapter	2011	25
38	Dispersion of multiwalled carbon nanotubes in water by lignin Olivier Rochez, Gwendoline Zorzini, Julien Amadou et al. · Journal of Materials Science	7 Mar 2013	24
39	Modeling of a continuous rotary reactor for carbon nanotube synthesis by catalytic chemical vapor deposition Sophie L. Pirard, Jean‐Paul Pirard, Christophe Bossuot · AIChE Journal	22 Jan 2009	24
40	Compression resistance and hysteresis of carbon fibre tows with grown carbon nanotubes/nanofibres Stepan Vladimirovitch Lomov, Larissa Gorbatikh, Matthieu Houllé et al. · Composites Science and Technology	21 Aug 2011	21
41	End-selective functionalization of carbon nanotubes. Use of DOE for the optimization of a DNA probe attachment and hybridization using an enzymatic amplifying system Maytal Piran, Vadim Kotlyar, Dana Dina Medina et al. · Journal of Materials Chemistry	12 Dec 2008	17
42	Compressibility of CNT-Grafted Fibrous Reinforcements: A Theory Stepan Vladimirovitch Lomov, Vitaly Koissin, Mehmet Karahan et al. · International Journal of Material Forming	Apr 2010	16
43	Large-scale synthesis of multi-walled carbon nanotubes in a continuous inclined mobile-bed rotating reactor by the catalytic chemical vapour deposition process using methane as carbon source Sigrid Douven, Sophie L. Pirard, Fang-Yue Chan et al. · Chemical Engineering Journal	10 Feb 2012	16
44	Polymer coatings to functionalize carbon nanotubes Sami Abou Rich, M. Yedji, Julien Amadou et al. · Physica E Low-dimensional Systems and Nanostructures	18 Dec 2010	15
45	Role of processing history on the mechanical and electrical behavior of melt‐compounded polycarbonate‐multiwalled carbon nanotube nanocomposites Gabriel Y. H. Choong, Chun Yee Lew, Davide S. A. De Focatiis · Journal of Applied Polymer Science Open access	15 Apr 2015	14
46	Implementation of a safe-by-design approach in the development of new open pilot lines for the manufacture of carbon nanotube-based nano-enabled products Jesús López de Ipiña, Ángel Hernán, Xabier Cenigaonaindia et al. · Journal of Physics Conference Series Conference paperOpen access	Jun 2017	10
47	Polypropylene based carbon nanotubes composites: structure and properties Daniela Tabuani, Walter Granelli, Giovanni Camino et al. · e-Polymers Open access	Dec 2008	8
48	A reversible decoration of multi-walled carbon nanotubes (MWCNTs) by acyclic η4-(1E,3E)-dienyl-Fe(CO)3 complexes Jean‐Paul Lellouche, Maytal Piran, Lior Shahar et al. · Journal of Materials Chemistry	2008	7
49	Injection moulding of polymer–carbon nanotube composites Chun Yee Lew, C. Dewaghe, Michael Claes · Elsevier eBooks Book chapter	2011	6
50	Examples and Case Studies Christof Asbach, Olivier Aguerre, Christophe Bressot et al. · Elsevier eBooks Book chapter	2014	5

Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.