Science Explorer Back to mapMap
Institution · NextFlex

Most cited papers from NextFlex

What are the most cited papers from NextFlex?

The most cited paper from NextFlex is "Print Process Development for Ag-Ink Thermoformable Conductive Traces Utilizing Direct Write technique for In-Mold Printed Electronics" (Pradeep Lall, Md Golam Sarwar, Jinesh Narangaparambil et al., 2023), with 17 citations. Next come "Origami-Inspired Frequency Selective Surface with Fixed Frequency Response under Folding" (17) and "Effect of Sintering Temperature on the Fatigue Life of Additively Printed Electronics During Cyclic Bending" (16).

Showing 50 of 62 papers. Every paper with more than 3 citations is listed.

Most cited papers, sortable by citations and release date
#Paper
1 Print Process Development for Ag-Ink Thermoformable Conductive Traces Utilizing Direct Write technique for In-Mold Printed Electronics Pradeep Lall, Md Golam Sarwar, Jinesh Narangaparambil et al. Conference paper 30 May 2023 17
2 Origami-Inspired Frequency Selective Surface with Fixed Frequency Response under Folding Deanna Sessions, Alexander B. Cook, Kazuko Fuchi et al. · Sensors Open access 5 Nov 2019 17
3 Effect of Sintering Temperature on the Fatigue Life of Additively Printed Electronics During Cyclic Bending Pradeep Lall, Jinesh Narangaparambil, Ben Leever et al. Conference paper May 2019 16
4 Effect of Shallow Cycling on Flexible Power-Source Survivability under Bending Loads and Operating Temperatures Representative of Stresses of Daily Motion Pradeep Lall, Amrit Singh Abrol, Ben Leever et al. Conference paper May 2018 16
5 Effect of Process Parameters on Aerosol Jet Printing of Multi-Layer Circuitry Pradeep Lall, Kartik Goyal, Nakul Kothari et al. Conference paper 7 Oct 2019 15
6 Effect of Sintering Time and Sintering Temperature on the Mechanical and Electrical Properties of Aerosol-Jet Additively Printed Electronics Pradeep Lall, Nakul Kothari, Amrit Singh Abrol et al. Conference paper May 2019 14
7 Influence of Print Parameters on Mechanical and Electrical Properties of Conductive Traces Printed Using Water-Based Silver Nanoparticle Ink on Inkjet Platform Pradeep Lall, Shriram Kulkarni, Scott Miller Conference paper 30 May 2023 13
8 Development of Test Protocols for the Flexible Substrates in Wearable Applications Pradeep Lall, Jinesh Narangaparambil, Amrit Singh Abrol et al. Conference paper May 2018 12
9 Oscillator Performance on Thermoformed Additive In-Mold Electronics for Automotive Applications Pradeep Lall, Aditya Harsha, Shriram Kulkarni et al. Conference paper 8 Oct 2024 11
10 Component Attach Process Recipe and Performance on Aerosol Printed Sustainable Silver Ink Pradeep Lall, Sabina Bimali, Jinesh Narangaparambil et al. Conference paper 24 Oct 2023 11
11 Factors Influencing the Line Consistency of Commonly Used Geometries for Additively Printed Electronics Pradeep Lall, Kartik Goyal, Ben Leever et al. Conference paper May 2019 11
12 Effect of Print Parameters on Print Consistency of Aerosol Jet Printed Electronics Pradeep Lall, Amrit Singh Abrol, Nakul Kothari et al. Conference paper May 2019 11
13 Electrically Conductive Adhesive Interconnections on Additively Printed Substrates Pradeep Lall, Kartik Goyal, Kyle D. Schulze et al. Conference paper Jun 2021 10
14 Low Temperature Solder Interconnection of Surface Mount Devices with Additively Printed Pads on Flexible Substrate Pradeep Lall, Kartik Goyal, Kyle D. Schulze et al. Conference paper Jun 2021 10
15 Reparability Test of Aerosol-Jet Printed Sustainable Silver Ink Circuit Pradeep Lall, Sabina Bimali, Scott Miller Conference paper 24 Oct 2023 9
16 Realization of Circuits with Additively Printed Water Based Nanoparticle Sustainable Silver-Ink with Ultrasonic Atomization on Aerosol Jet Printer Pradeep Lall, Daniel Karakitie, Ved Soni et al. Conference paper 30 May 2023 9
17 Process Capability of Aerosol-Jet Additive Processes for Long-Runs Up to 10-Hours Pradeep Lall, Amrit Singh Abrol, Nakul Kothari et al. · Journal of Electronic Packaging 23 Sep 2020 9
18 Performance Analysis of Screen-Printed Functional Circuits on Biodegradable PET Substrates Using Low-Temperature ECA for SMD Component Attachment Pradeep Lall, Shriram Kulkarni, Scott Miller Conference paper 28 May 2024 8
19 Comparative Study of SMD Components Attached Using Electrically Conductive Adhesive and Magnetically Oriented Anisotropic Conductive Adhesive on Inkjet Printed Structures Pradeep Lall, Shriram Kulkarni, Jinesh Narangaparambil et al. Conference paper 24 Oct 2023 8
20 Repairability of SMDs on 3D Printed Circuitry for Sustainable Electronics Utilizing Direct Write Technique Pradeep Lall, Md Golam Sarwar, Ved Soni et al. Conference paper 24 Oct 2023 8
21 Process Recipes of Additively Printed Sustainable Silver-Ink Using Aerosol Jet Printing Pradeep Lall, Sabina Bimali, Ved Soni et al. Conference paper 30 May 2023 8
22 Sustainable Silver Ink Process Study on Low-Temperature Flexible Substrates Pradeep Lall, Fatahi Musa, Jinesh Narangaparambil et al. Conference paper 30 May 2023 8
23 Sintering Process Conditions for Additive Printing of Multi-Layer Circuitry Aerosol-Jet Process in Conjunction with Nanoparticle Ink Pradeep Lall, Jinesh Narangaparambil, Ved Soni et al. Conference paper Jul 2020 8
24 A Metatranscriptomics Survey of Microbial Diversity on Surfaces Post-Intervention of cleanSURFACES® Technology in an Intensive Care Unit Jeremy R. Chen See, Truc T. Ly, Alexander J. Shope et al. · Frontiers in Cellular and Infection Microbiology Open access 20 Jul 2021 7
25 Process-Consistency in Additive Printed Multilayer Substrates With Offset-Vias Using Aerosol Jet Technology Pradeep Lall, Kartik Goyal, Scott Miller Conference paper 27 Oct 2020 7
26 Effect of Process Parameters on the Long-Run Print Consistency and Material Properties of Additively Printed Electronics Pradeep Lall, Nakul Kothari, Amrit Singh Abrol et al. Conference paper May 2019 7
27 Effect of Shallow Charging on Flexible Power Source Capacity Subjected to Varying Charge Protocols and C-Rates Pradeep Lall, Ved Soni, Amrit Singh Abrol et al. Conference paper May 2019 7
28 Comparative Performance Analysis of Screen-Printed Structures on PET and BPET Substrates Utilizing Low-Temperature ECA and MACA for SMD Component Attachment Pradeep Lall, Shriram Kulkarni, Scott Miller Conference paper 8 Oct 2024 6
29 Screen-Printed Thermoformed Circuits Performance and Reliability under Sustained High Temperatures for In-Mold Electronics Pradeep Lall, Shriram Kulkarni, Scott Miller Conference paper 28 May 2024 6
30 Printed Flexible LC Filter Using Additive Micro-Dispensing With Silver Conductive Paste and ECA for Component Attachment Pradeep Lall, Jinesh Narangaparambil, Kyle D. Schulze et al. Conference paper 26 Oct 2021 6
31 Additively Printed Multilayer Substrate Using Aerosol-Jet Technique Pradeep Lall, Kartik Goyal, Nakul Kothari et al. · Journal of Electronic Packaging 10 Jun 2020 6
32 Flexure and Twist Test Reliability Assurance of Flexible Electronics Pradeep Lall, Jinesh Narangaparambil, Ben Leever et al. Conference paper 7 Oct 2019 6
33 Reliability of Additively Printed Traces on Polymer Substrates Subjected to Mechanical Stretching Pradeep Lall, Kartik Goyal, Ben Leever et al. Conference paper May 2019 6
34 Surface-Mount Component Attachment on Aerosol Jet Printed Sustainable Water-Base Silver Nanoparticle Ink Pradeep Lall, Daniel Karakitie, Scott Miller Conference paper 24 Oct 2023 5
35 Process Performance Interactions for Additively Printed Water-Based Nanoparticle Sustainable Silver-Ink With Ultrasonic Atomization on Aerosol Jet Printer Pradeep Lall, Daniel Karakitie, Scott Miller Conference paper 24 Oct 2023 5
36 Evaluation of Thermoformability of Additively Printed Circuits Printed Using Gravure Offset Printing Technique and Investigation of In-Mold Electronic Circuits Pradeep Lall, Ved Soni, Jinesh Narangaparambil et al. Conference paper 24 Oct 2023 5
37 Component Attachment to Inkjet Additive Printed Circuits to Achieve Flexible Signal Filters using Silver and Copper Nanoparticle Metal Inks Pradeep Lall, Kartik Goyal, Scott Miller · 2022 21st IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm) Conference paper 31 May 2022 5
38 Process-Reliability Relationships of SnBiAg and SnIn Solders for Component Attachment on Flexible Direct-Write Additive Circuits in Wearable Applications Pradeep Lall, Jinesh Narangaparambil, Scott Miller · 2022 IEEE 72nd Electronic Components and Technology Conference (ECTC) Conference paper May 2022 5
39 Effect of Charge-Discharge Depth and Environment Use Conditions on Flexible Power Sources Pradeep Lall, Ved Soni, Amrit Singh Abrol et al. Conference paper 7 Oct 2019 5
40 Effect of Use Parameters on Fatigue-Life of Flexible Substrates under Bending Loads Pradeep Lall, Jinesh Narangaparatnbil, Ben Leever et al. Conference paper May 2019 5
41 Thermo-mechanical Deformation in Flexible-Board Assemblies During Reflow and Post-Assembly Usage Pradeep Lall, Kartik Goyal, Ben Leever et al. Conference paper May 2018 5
42 Additively Manufactured in-Mold Electronics Reliability Under Thermal Cycling and Sustained High Temperature Shriram Kulkarni, Aditya Harsha, Md Golam Sarwar et al. Conference paper 27 May 2025 4
43 Reliability of Additively Printed In-Mold Electronics Using ECA in Sustained High-Temperature Operation Pradeep Lall, Md Golam Sarwar, Scott Miller Conference paper 28 May 2024 4
44 Functional Circuit Performance of Printable Formable Inks for In-Mold Electronics Applications Pradeep Lall, Jinesh Narangaparambil, Ved Soni et al. Conference paper 24 Oct 2023 4
45 Direct Write Thermoformed Additive Silver Circuits With SMDs Attachment for In-Mold Electronics Pradeep Lall, Md Golam Sarwar, Ved Soni et al. Conference paper 24 Oct 2023 4
46 Sustainable Silver Ink Flexible Circuits Fabrication Using Direct Write Additive Manufacturing Techniques Pradeep Lall, Fatahi Musa, Ved Soni et al. Conference paper 24 Oct 2023 4
47 The role of surface roughness on the electrical behavior of flexible and stretchable screen-printed silver ink on Kapton substrate Mohamed Y. Abdelatty, Ashraf I. Umar, Gurvinder Singh Khinda et al. · Flexible and Printed Electronics Open access 21 Nov 2023 4
48 Mapping geometric and electromagnetic feature spaces with machine learning for additively manufactured RF devices Deanna Sessions, Venkatesh Meenakshisundaram, Andrew S. Gillman et al. · Additive manufacturing Open access 10 Dec 2021 4
49 Interconnection of Passive Components using Printed Aerosol-Jet Traces Pradeep Lall, Jinesh Narangaparambil, Kyle D. Schulze et al. Conference paper Jun 2021 4
50 Process-Consistency-Performance Relationships for Additively Printed Z-axis Interconnects in Multilayer Circuits Pradeep Lall, Scott Miller, Kartik Goyal et al. Conference paper Jun 2020 4

Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.