Most cited papers from Northern Technical University
What are the most cited papers from Northern Technical University?
The most cited paper from Northern Technical University is "Alcohol and ether as alternative fuels in spark ignition engine: A review" (Omar I. Awad, Rizalman Mamat, Obed M. Ali et al., 2017), with 346 citations. Next come "Properties evaluation of fiber reinforced polymers and their constituent materials used in structures – A review" (311) and "Metal-organic frameworks (MOFs) in water filtration membranes for desalination and other applications" (274).
Showing 50 of 60 papers. Every paper with more than 82 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Alcohol and ether as alternative fuels in spark ignition engine: A review Omar I. Awad, Rizalman Mamat, Obed M. Ali et al. · Renewable and Sustainable Energy Reviews | Nov 2017 | 346 |
| 2 | Properties evaluation of fiber reinforced polymers and their constituent materials used in structures – A review Imad Shakir Abbood, Sief aldeen Odaa, Kamalaldin F. Hasan et al. · Materials Today Proceedings | 10 Sep 2020 | 311 |
| 3 | Metal-organic frameworks (MOFs) in water filtration membranes for desalination and other applications Mohammed A. Kadhom, Baolin Deng · Applied Materials Today | 9 Mar 2018 | 274 |
| 4 | Comprehensive systematic review of information fusion methods in smart cities and urban environments Mohammed Abdulraheem Fadhel, Ali M. Duhaim, Ahmed Saihood et al. · Information Fusion | 21 Feb 2024 | 217 |
| 5 | A Review on Upper Limb Rehabilitation Robots Hassan M. Qassim, Wan Zuha Wan Hasan · Applied Sciences | 6 Oct 2020 | 200 |
| 6 | Structural behavior of RC engineered cementitious composite (ECC) exterior beam–column joints under reversed cyclic loading Shwan H. Said, Hashim Abdul Razak · Construction and Building Materials | 13 Jan 2016 | 197 |
| 7 | Inorganic arsenic species removal from water using bone char: A detailed study on adsorption kinetic and isotherm models using error functions analysis Susan S.A. Alkurdi, Raed A. Al-Juboori, Jochen Bundschuh et al. · Journal of Hazardous Materials | 28 Sep 2020 | 167 |
| 8 | The effect of synthetic polyethylene fiber on the strain hardening behavior of engineered cementitious composite (ECC) Shwan H. Said, Hashim Abdul Razak · Materials & Design | 29 Jul 2015 | 166 |
| 9 | Modeling of PV system and parameter extraction based on experimental data: Review and investigation Ali Mahmood Humada, Salih Younis Darweesh, Khalid G. Mohammed et al. · Solar Energy | 27 Feb 2020 | 163 |
| 10 | Advances in mechanical metamaterials for vibration isolation: A review Mohammed Al Rifaie, Hasanain S. Abdulhadi, Ahsan Mian · Advances in Mechanical Engineering | Mar 2022 | 162 |
| 11 | Effects of nano-palm oil fuel ash and nano-eggshell powder on concrete Hussein Mahmood Hamada, Bassam A. Tayeh, Fadzil Mat Yahaya et al. · Construction and Building Materials | 2 Jul 2020 | 162 |
| 12 | Response surface methodology (RSM) based multi-objective optimization of fusel oil -gasoline blends at different water content in SI engine Omar I. Awad, Rizalman Mamat, Obed M. Ali et al. · Energy Conversion and Management | 17 Aug 2017 | 158 |
| 13 | Biochar versus bone char for a sustainable inorganic arsenic mitigation in water: What needs to be done in future research? Susan S.A. Alkurdi, Indika Herath, Jochen Bundschuh et al. · Environment International | 22 Mar 2019 | 155 |
| 14 | Current Trends in Metallic Materials for Body Panels and Structural Members Used in the Automotive Industry Tomasz Trzepieciński, Sherwan Mohammed Najm · Materials | 25 Jan 2024 | 154 |
| 15 | Bone char as a green sorbent for removing health threatening fluoride from drinking water Susan S.A. Alkurdi, Raed A. Al-Juboori, Jochen Bundschuh et al. · Environment International | 15 Apr 2019 | 147 |
| 16 | Effect of dual surface cooling of solar photovoltaic panel on the efficiency of the module: experimental investigation Ephraim Bonah Agyekum, Seepana Praveenkumar, Naseer Tawfeeq Alwan et al. · Heliyon | Sep 2021 | 142 |
| 17 | Effect of recycled waste glass on the properties of high-performance concrete: A critical review Hussein Mahmood Hamada, Alyaa Al-Attar, Bassam A. Tayeh et al. · Case Studies in Construction Materials | 16 May 2022 | 138 |
| 18 | Multi-objective optimization and the effect of the economic factors on the design of the microgrid hybrid system Mohammed Kharrich, Omar Hazem Mohammed, Nahar Fehaid Alshammari et al. · Sustainable Cities and Society | 9 Dec 2020 | 138 |
| 19 | The present state of the use of eggshell powder in concrete: A review Hussein Mahmood Hamada, Bassam A. Tayeh, Alyaa Al-Attar et al. · Journal of Building Engineering | 6 Aug 2020 | 138 |
| 20 | New Advances and Future Possibilities in Forming Technology of Hybrid Metal–Polymer Composites Used in Aerospace Applications Tomasz Trzepieciński, Sherwan Mohammed Najm, Manel Sbayti et al. · Journal of Composites Science | 13 Aug 2021 | 137 |
| 21 | SUPPORT VECTOR MACHINES IN STRUCTURAL ENGINEERING: A REVIEW Abdülkadir Çevik, Ahmet Emin Kurtoğlu, Mahmut Bilgehan et al. · Journal of Civil Engineering and Management | 26 Feb 2015 | 135 |
| 22 | Thin Film Nanocomposite Membrane Filled with Metal-Organic Frameworks UiO-66 and MIL-125 Nanoparticles for Water Desalination Mohammed A. Kadhom, Weiming Hu, Baolin Deng · Membranes | 14 Jun 2017 | 134 |
| 23 | Developed Approach Based on Equilibrium Optimizer for Optimal Design of Hybrid PV/Wind/Diesel/Battery Microgrid in Dakhla, Morocco Mohammed Kharrich, Salah M. Kamel, Mohamed Abdeen et al. · IEEE Access | 2021 | 133 |
| 24 | Enhancing Traffic Intelligence in Smart Cities Using Sustainable Deep Radial Function Ayad Ghany Ismaeel, J. Prisca Mary, Anitha Chelliah et al. · Sustainability | 3 Oct 2023 | 126 |
| 25 | Air quality index prediction using IDW geostatistical technique and OLS-based GIS technique in Kuala Lumpur, Malaysia Huda Jamal Jumaah, Mohammed Hashım Ameen, Bahareh Kalantar et al. · Geomatics Natural Hazards and Risk | 2019 | 125 |
| 26 | Ultrasonic health monitoring in structural engineering: buildings and bridges Nadom Khalifa Mutlib, Shahrizan Baharom, Ahmed El‐Shafie et al. · Structural Control and Health Monitoring | 9 Sep 2015 | 124 |
| 27 | Thermal performance and thermal properties of hybrid nanofluid laminar flow in a double pipe heat exchanger Adnan Mohammed Hussein · Experimental Thermal and Fluid Science | 20 May 2017 | 123 |
| 28 | Effect of high-volume ultrafine palm oil fuel ash on the engineering and transport properties of concrete Hussein Mahmood Hamada, Alyaa Al-Attar, Fadzil Mat Yahaya et al. · Case Studies in Construction Materials | 29 Nov 2019 | 121 |
| 29 | Influence of different curing methods on the compressive strength of ultra-high-performance concrete: A comprehensive review Hussein Mahmood Hamada, Alyaa Al-Attar, Bassam A. Tayeh et al. · Case Studies in Construction Materials | 18 Aug 2022 | 119 |
| 30 | Effect of pyrolysis conditions on bone char characterization and its ability for arsenic and fluoride removal Susan S.A. Alkurdi, Raed A. Al-Juboori, Jochen Bundschuh et al. · Environmental Pollution | 19 Feb 2020 | 118 |
| 31 | Particulate emissions from gasoline direct injection engines: A review of how current emission regulations are being met by automobile manufacturers Omar I. Awad, Xiao Ma, Mohammed Kamil et al. · The Science of The Total Environment | 13 Feb 2020 | 117 |
| 32 | Particle Swarm Optimization Of a Hybrid Wind/Tidal/PV/Battery Energy System. Application To a Remote Area In Bretagne, France Omar Hazem Mohammed, Yassine Amirat, Mohamed Benbouzid · Energy Procedia | Apr 2019 | 117 |
| 33 | Credit Card Fraud Detection Using Fuzzy Rough Nearest Neighbor and Sequential Minimal Optimization with Logistic Regression Ameer Hussein, Rihab Salah Khairy, Shaima Miqdad Mohamed Najeeb et al. · International Journal of Interactive Mobile Technologies (iJIM) | 16 Mar 2021 | 112 |
| 34 | Enhancement of the performance of Photovoltaic/Trombe wall system using the porous medium: Experimental and theoretical study Omer K. Ahmed, Khalaf I. Hamada, Abdulrazzaq M. Salih · Energy | 4 Jan 2019 | 111 |
| 35 | Influence of porous media on the performance of hybrid PV/Thermal collector Omer K. Ahmed, Zala Aziz Mohammed · Renewable Energy | 19 May 2017 | 107 |
| 36 | Using fusel oil as a blend in gasoline to improve SI engine efficiencies: A comprehensive review Omar I. Awad, Obed M. Ali, Rizalman Mamat et al. · Renewable and Sustainable Energy Reviews | 9 Dec 2016 | 107 |
| 37 | Overview of polyoxymethylene dimethyl ether additive as an eco-friendly fuel for an internal combustion engine: Current application and environmental impacts Omar I. Awad, Xiao Ma, Mohammed Kamil et al. · The Science of The Total Environment | 22 Jan 2020 | 104 |
| 38 | New design of solar chimney (case study) Omer K. Ahmed, Abdullah Sabah Hussein · Case Studies in Thermal Engineering | 2018 | 104 |
| 39 | Potentials of palm oil as new feedstock oil for a global alternative fuel: A review Mohd Hafizil Mat Yasin, Rizalman Mamat, Gholamhassan Najafi et al. · Renewable and Sustainable Energy Reviews | 28 May 2017 | 102 |
| 40 | Application of response surface methodology in optimization of performance and exhaust emissions of secondary butyl alcohol-gasoline blends in SI engine I.M. Yusri, Rizalman Mamat, W.H. Azmi et al. · Energy Conversion and Management | 16 Dec 2016 | 99 |
| 41 | Evaluation of Solar Energy Powered Seawater Desalination Processes: A Review Mudhar Abdul Alwahab Al-Obaidi, Rana H. A. Zubo, Farhan Lafta Rashid et al. · Energies | 8 Sep 2022 | 97 |
| 42 | Experimental investigation of modified solar still integrated with solar collector Naseer Tawfeeq Alwan, С. Е. Щеклеин, Obed M. Ali · Case Studies in Thermal Engineering | 29 Feb 2020 | 97 |
| 43 | Dam site suitability assessment at the Greater Zab River in northern Iraq using remote sensing data and GIS Abbas Mohammed Noori, Biswajeet Pradhan, Qayssar Mahmood Ajaj · Journal of Hydrology | 7 May 2019 | 95 |
| 44 | Evaluation on physicochemical properties of iso-butanol additives in ethanol-gasoline blend on performance and emission characteristics of a spark-ignition engine M.S.M. Zaharin, Nik Rosli Abdullah, H.H. Masjuki et al. · Applied Thermal Engineering | 30 Aug 2018 | 95 |
| 45 | Enhancing sustainability in concrete construction: A comprehensive review of plastic waste as an aggregate material Hussein Mahmood Hamada, Alyaa Al-Attar, Farid Abed et al. · Sustainable materials and technologies | 7 Mar 2024 | 92 |
| 46 | Sustainable application of coal bottom ash as fine aggregates in concrete: A comprehensive review Hussein Mahmood Hamada, Alyaa Al-Attar, Bassam A. Tayeh et al. · Case Studies in Construction Materials | 6 May 2022 | 92 |
| 47 | Performance augmentation of a PV/Trombe wall using Al2O3/Water nano-fluid: An experimental investigation Azhar Ahmed Abed, Omer K. Ahmed, Musa Mustafa Weis et al. · Renewable Energy | 15 May 2020 | 92 |
| 48 | Competitive adsorption of As(III) and As(V) onto chitosan/diatomaceous earth adsorbent Suhaib S. Salih, Abdulbasit Mahdi, Mohammed A. Kadhom et al. · Journal of environmental chemical engineering | 6 Sep 2019 | 92 |
| 49 | Modern heavyweight concrete shielding: Principles, industrial applications and future challenges; review Cheah Chee Ban, Mohammed A. Khalaf, Mahyuddin B. Ramli et al. · Journal of Building Engineering | 16 Feb 2021 | 89 |
| 50 | Microstructure and structural analysis of polypropylene fibre reinforced reactive powder concrete beams exposed to elevated temperature Mazin B. Abdulrahman, Alyaa Al-Attar, Hussein Mahmood Hamada et al. · Journal of Building Engineering | 7 Jan 2020 | 89 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.