Most cited papers from NSK (United States)

NSK (United States)

What are the most cited papers from NSK (United States)?

The most cited paper from NSK (United States) is "Effect of Volume Fraction of Constituent Phases on the Stress-Strain Relationship of Dual Phase Steels." (Thomas Hüper, Shigeru Endo, Nobuyuki Ishikawa et al., 1999), with 122 citations. Next come "Development of Waste Plastics Injection Process in Blast Furnace." (116) and "Inclusion Particle Growth during Solidification of Stainless Steel." (108).

Published TypeFieldAccessCitations

Showing 50 of 60 papers. Every paper with more than 25 citations is listed.

Most cited papers, sortable by citations and release date
#	Paper
1	Effect of Volume Fraction of Constituent Phases on the Stress-Strain Relationship of Dual Phase Steels. Thomas Hüper, Shigeru Endo, Nobuyuki Ishikawa et al. · ISIJ International Open access	1999	122
2	Development of Waste Plastics Injection Process in Blast Furnace. Minoru Asanuma, Tatsuro Ariyama, Michitaka Sato et al. · ISIJ International Open access	2000	116
3	Inclusion Particle Growth during Solidification of Stainless Steel. Mikio Suzuki, R yuji Yamaguchi, Katsuhiko Murakami et al. · ISIJ International Open access	2001	108
4	Development of a new mold oscillation mode for high-speed continuous casting of steel slabs. Mikio Suzuki, Hideaki Mizukami, Toru Kitagawa et al. · ISIJ International Open access	1991	95
5	Effect of SiC on Interfacial Reaction and Sintering Mechanism of TiB 2 Shiro Torizuka, Kaoru Sato, Hiroaki Nishio et al. · Journal of the American Ceramic Society	Jun 1995	94
6	The Effects of Hydrogen on Microstructural Change and Surface Originated Flaking in Rolling Contact Fatigue Hideyuki Uyama, Hiroki Yamada, Hideyuki Hidaka et al. · Tribology online Open access	2011	94
7	Calculation of Phase Equilibria between Austenite and (Nb, Ti, V)(C, N) in Microalloyed Steels. Kojikoji Inoue, Nobuyuki Ishikawa, Ikuo Ohnuma et al. · ISIJ International Open access	2001	92
8	Effects of Cu and Other Tramp Elements on Steel Properties. Influence of Cu and Sn on Hot Ductility of Steels with Various C Content. Hideki Matsuoka, Koichi OSAWA, Moriaki Ono et al. · ISIJ International Open access	1997	91
9	Grasping force control of multi-fingered robot hand based on slip detection using tactile sensor Daisuke Gunji, Yoshitomo Mizoguchi, Seiichi Teshigawara et al. Conference paper	May 2008	90
10	Analysis of Chaffer in Tandem Cold Rolling Mills. Yukio Kimura, Yasuhiro Sodani, Nobuo Nishiura et al. · ISIJ International Open access	2003	74
11	A GAN and Feature Selection-Based Oversampling Technique for Intrusion Detection Xiaodong Liu, Tong Li, Runzi Zhang et al. · Security and Communication Networks Open access	5 Jul 2021	70
12	Evaluation of Hydrogen Content Trapped by Vanadium Precipitates in a Steel Tomoyuki Yokota, Tetsuo Shiraga · ISIJ International Open access	2003	67
13	The Effect of Crystallization of Mold Powder on the Heat Transfer in Continuous Casting Mold Keiji Watanabe, Makoto Suzuki, Katsuhiko Murakami et al. · 鐵と鋼 : 日本鐡鋼協會々誌 Open access	1997	66
14	Perspectives of Research on High-speed Conventional Slab Continuous Casting of Carbon Steels. Mikio Suzuki, Makoto Suzuki, Masayuki Nakada · ISIJ International Open access	2001	64
15	Lubrication Condition Monitoring of Practical Ball Bearings by Electrical Impedance Method Taisuke Maruyama, Masayuki Maeda, Ken Nakano · Tribology online Open access	14 Dec 2019	61
16	Amyloplast displacement is necessary for gravisensing in Arabidopsis shoots as revealed by a centrifuge microscope Masatsugu Toyota, Norifumi Ikeda, Satoe Sawai‐Toyota et al. · The Plant Journal Open access	5 Sep 2013	58
17	Research Work for Clarifying the Mechanism of White Structure Flaking and Extending the Life of Bearings Kenichi Iso, Atsushi Yokouchi, Hiromichi Takemura · SAE technical papers on CD-ROM/SAE technical paper series Conference paper	11 Apr 2005	57
18	Recrystallization of Lath Martensite with Bulge Nucleation and Growth Mechanism. Toshihiro Tsuchiyama, Yoshiyuki Miyamoto, Setsuo Takaki · ISIJ International Open access	2001	55
19	Process Characteristics of a Commercial-scale Oxygen Blast Furnace Process with Shaft Gas Injection. Yotaro Ohno, Masahiro Matsuura, Hiroyuki Mitsufuji et al. · ISIJ International Open access	1992	55
20	Influence of Casting Conditions on Molten Steel Flow in Continuous Casting Mold at High Speed Casting of Slabs Toshio TESHIMA, Jun Kubota, Mikio Suzuki et al. · 鐵と鋼 : 日本鐡鋼協會々誌 Open access	1993	54
21	Influence of Carbon Content on Solidifying Shell Growth of Carbon Steels at the Initial Stage of Solidification Mikio Suzuki, Yuichi Yamaoka · MATERIALS TRANSACTIONS Open access	2003	53
22	Micromechanical Modeling of Ferrite-Pearlite Steels Using Finite Element Unit Cell Models. Nobuyuki Ishikawa, David M. Parks, Simona Socrate et al. · ISIJ International Open access	2000	52
23	Effects of the Austenite Grain Size and Deformation in the Unrecrystallized Austenite Region on Bainite Transformation Behavior and Microstructure. Sadahiro Yamamoto, Hiroyasu Yokoyama, Katsumi Yamada et al. · ISIJ International Open access	1995	51
24	Simulation of Transport Phenomena around the Raceway Zone in the Blast Furnace with and without Pulverized Coal Injection. Hideyuki Aoki, Hiroshi Nogami, Hideo Tsuge et al. · ISIJ International Open access	1993	50
25	Effect of Microstructure on Fracture Mechanisms in Galvannealed Coatings. A.T. Alpas, J. Inagaki · ISIJ International Open access	2000	47
26	Few-Shot Model Agnostic Federated Learning Wenke Huang, Mang Ye, Bo Du et al. · Proceedings of the 30th ACM International Conference on Multimedia Conference paper	10 Oct 2022	46
27	A systematic overview of the first pasteurised VWF/FVIII medicinal product, Haemate®P/ Humate®‐P: History and clinical performance Erik E. Berntorp, William Archey, Günter Auerswald et al. · European Journal Of Haematology Open access	Apr 2008	46
28	Control of Uneven Solidified Shell Formation of Hypo-peritectic Carbon Steels in Continuous Casting Mold Hiroshi Murakami, Mikio Suzuki, Toru Kitagawa et al. · 鐵と鋼 : 日本鐡鋼協會々誌 Open access	1992	44
29	Frequency characteristics of Levant's differentiator and adaptive sliding mode differentiator Seiichi Kobayashi, Katsuhisa Furuta · International Journal of Systems Science	Oct 2007	44
30	A review on multimodal zero‐shot learning Weipeng Cao, Yuhao Wu, Yixuan Sun et al. · Wiley Interdisciplinary Reviews Data Mining and Knowledge Discovery Open access	20 Jan 2023	42
31	Evaluation of Matrix of Coke Strength by Nano-indentation Method Masahiko Mihashi, Munetaka Soejima, Yusuke Asakuma et al. · 鐵と鋼 : 日本鐡鋼協會々誌 Open access	2002	42
32	Development of Burden Distribution Simulation Model for Bell-less Top in a Large Blast Furnace and Its Application. Michinori Hattori, Bungo Iino, Akio SHIMOMURA et al. · ISIJ International Open access	1993	42
33	Development of Oxygen Blast Furnace Process with Preheating Gas Injection into Upper Shaft Yotaro Ohno, Hirohisa Hotta, Masahiro Matsuura et al. · 鐵と鋼 : 日本鐡鋼協會々誌 Open access	1989	41
34	X-Ray CT Imaging of Grease Behavior in Ball Bearing and Numerical Validation of Multi-Phase Flows Simulation Takashi Noda, Kenichi Shibasaki, Shinji Miyata et al. · Tribology online Open access	28 Feb 2020	39
35	Mooring Line Damping Due to First- and Second-Order Vessel Motion Erling Huse, Koichiro Matsumoto · Offshore Technology Conference Conference paper	May 1989	39
36	Acceleration of Decarburization in RH Vacuum Degassing Process. Shigeru INOUE, Yoshikazu Furuno, Tsutomu Usui et al. · ISIJ International Open access	1992	39
37	Effect of NaCl on Rusting of Steel in Wet and Dry Corrosion Cycle Toshiyasu NISHIMURA, Kenitsu Tanaka, Yoshiaki Shimizu · 鐵と鋼 : 日本鐡鋼協會々誌 Open access	1995	38
38	Visualization of Hydrogen Diffusion in a Hydrogen-Enhanced Fatigue Crack Growth in Type 304 Stainless Steel Hisao Matsunaga, Hiroshi Noda · Metallurgical and Materials Transactions A	28 Mar 2011	38
39	Estimation of Mold Powder Consumption in Continuous Casting Koichi Tsutsumi, Hiroshi Murakami, Shin-ichi NISHIOKA et al. · 鐵と鋼 : 日本鐡鋼協會々誌 Open access	1998	37
40	Acceleration of Superlong Fatigue Failure by Hydrogen Trapped by Inclusions and Elimination of Conventional Fatigue Limit Yukitaka MURAKAMI, Hiroshi KONISHI, Kenichi Takai et al. · 鐵と鋼 : 日本鐡鋼協會々誌 Open access	2000	36
41	Protection of 304 Stainless Steel with TiO2 Coating Tooru Imokawa, Ryutaro Fujisawa, Arata SUDA et al. · Corrosion engineering digest Open access	1994	35
42	Influence of Microstructural Morphology and Prestraining on Short Fatigue Crack Propagation in Dual-phase Steels Katsumi Nakajima, Toshiaki Urabe, Yoshihiro Hosoya et al. · ISIJ International Open access	2001	35
43	Origin of the Recrystallization Texture Formation in an Interstitial Free Steel. Yasunobu Nagataki, Yoshihiro Hosoya · ISIJ International Open access	1996	32
44	Effects of Chemical Composition and Oxidation Temperature on the Adhesion of Scale in Plain Carbon Steels. Taro Kizu, Yasunobu Nagataki, Toru Inazumi et al. · ISIJ International Open access	2001	32
45	Modeling of Transformation Behavior and Compositional Partitioning in TRIP Steel. Toru MINOTE, Shiro Torizuka, Atsushi Ogawa et al. · ISIJ International Open access	1996	32
46	HAZ Softening and Creep Rupture Strength of High Cr Ferritic Steel Weldments. Toshifumi Kojima, Kenji Hayashi, Yasuyuki Kajita · ISIJ International Open access	1995	32
47	Rank reordering strategy for MPI topology creation functions Takao Hatazaki · Lecture notes in computer science Conference paper	1998	32
48	Effects of Electrolysis and Bath Conditions on the Surface Roughness, Morphologyand Crystal Orientation of Zinc Electrodeposit Masaru Sagiyama, Masaki Kawabe, Tsutomu Watanabe · 鐵と鋼 : 日本鐡鋼協會々誌 Open access	1990	31
49	Solidification and roll-bonding of shells in twin-roll casting process. Yoneaki Fujita, Hiroaki Sato, Toru Kitagawa et al. · ISIJ International Open access	1989	31
50	In-Situ Measurement of Fracture Strength of Solidifying Steel Shells to Predict Upper Limit of Casting Speed in Continuous Caster with Oscillating Mold. Mikio Suzuki, Makoto Suzuki, Chong-Hee Yu et al. · ISIJ International Open access	1997	30

Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.