Institution · Pryazovskyi State Technical University
Most cited papers from Pryazovskyi State Technical University
What are the most cited papers from Pryazovskyi State Technical University?
The most cited paper from Pryazovskyi State Technical University is "Green Economy in Sustainable Development and Improvement of Resource Efficiency" (Inesa S. Mikhno, Viktor V. Koval, Galyna Shvets et al., 2020), with 212 citations. Next come "Two-body abrasion resistance of high-carbon high-silicon steel: Metastable austenite vs nanostructured bainite" (62) and "Impact–abrasive–corrosion wear of Fe-based alloys: Influence of microstructure and chemical composition upon wear resistance" (62).
Showing 50 of 60 papers. Every paper with more than 29 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Green Economy in Sustainable Development and Improvement of Resource Efficiency Inesa S. Mikhno, Viktor V. Koval, Galyna Shvets et al. · Central European Business Review | 22 Dec 2020 | 212 |
| 2 | Two-body abrasion resistance of high-carbon high-silicon steel: Metastable austenite vs nanostructured bainite Vasily Georgievich Efremenko, Olaf Hesse, Thomas Friedrich et al. · Wear | 5 Nov 2018 | 62 |
| 3 | Impact–abrasive–corrosion wear of Fe-based alloys: Influence of microstructure and chemical composition upon wear resistance Vasily Georgievich Efremenko, Kazumichi Shimizu, Tohru Noguchi et al. · Wear | 18 Jun 2013 | 62 |
| 4 | Effect of Destabilizing Heat Treatment on Solid-State Phase Transformation in High-Chromium Cast Irons Vasily Georgievich Efremenko, Kazumichi Shimizu, Yu. G. Chabak · Metallurgical and Materials Transactions A | 30 Jul 2013 | 57 |
| 5 | The impact of green innovation on environmental performance of SMEs in an emerging economy I Wayan Edi Arsawan, Viktor V. Koval, Ганна Володимирівна Дугінець et al. · E3S Web of Conferences | 2021 | 53 |
| 6 | Recent Advances in Biodegradable Magnesium Alloys for Medical Implants: Evolution, Innovations, and Clinical Translation N. Aikin, Вадим Анатольевич Шаломеев, Volodymyr Valentynovych Kukhar et al. · Crystals | 23 Jul 2025 | 52 |
| 7 | Predicting the shape formation of hollow parts with a flange in the process of combined radial-reverse extrusion Natalia S. Hrudkina, Leila I. Aliieva, Oleg E. Markov et al. · Eastern-European Journal of Enterprise Technologies | 31 Aug 2020 | 51 |
| 8 | Determining the Optimal Directions of Investment in Regional Renewable Energy Development Iryna Mykolaivna Sotnyk, Тетяна Курбатова, Yaroslavna Romaniuk et al. · Energies | 16 May 2022 | 49 |
| 9 | The Development of the Method for the Calculation of the Shaping Force in the Production of Vehicle Wheel Rims Ruslan Puzyr, Volodymyr Valentynovych Kukhar, Alexander Maslov et al. · International Journal of Engineering & Technology | 15 Sep 2018 | 49 |
| 10 | Erosive wear performance of heat treated multi-component cast iron containing Cr, V, Mn and Ni eroded by alumina spheres at elevated temperatures Yao Zhang, Kazumichi Shimizu, Xinba Yaer et al. · Wear | 29 Jul 2017 | 49 |
| 11 | Designing and researching of the equipment for cutting by breaking of rolled stock Sergii Karnaukh, Oleg E. Markov, Leila I. Aliieva et al. · The International Journal of Advanced Manufacturing Technology | Aug 2020 | 48 |
| 12 | Improvement of upsetting process of four-beam workpieces based on computerized and physical modeling Oleg E. Markov, Volodymyr Valentynovych Kukhar, Vitalii N. Zlygoriev et al. · FME Transaction | 2020 | 47 |
| 13 | Effects of stress relief tempering on microstructure and tensile/impact behavior of quenched and partitioned commercial spring steel Vadym Zurnadzhy, Vasily Georgievich Efremenko, Kaiming Wu et al. · Materials Science and Engineering A | 24 Dec 2018 | 47 |
| 14 | Improvement of the Method for Calculating the Metal Temperature Loss on a Coilbox Unit at The Rolling on Hot Strip Mills Volodymyr Valentynovych Kukhar, Oleksandr Kurpe, Eduard S. Klimov et al. · International Journal of Engineering & Technology | 15 Sep 2018 | 47 |
| 15 | Microstructure and Properties of Heat Affected Zone in High-Carbon Steel after Welding with Fast Cooling in Water Michail Nikolaevich Brykov, Ivan Petryshynets, Miroslav Džupon et al. · Materials | 10 Nov 2020 | 45 |
| 16 | Phenomenological Model of Low-Carbon Steels Hardening during Multistage Drawing A.V. Grushko, Volodymyr Valentynovych Kukhar, Yu.O. Slobodyanyuk · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena | Sep 2017 | 43 |
| 17 | Classification of steels according to their sensitivity to fracture using a synergetic model Sergii Karnaukh, Oleg E. Markov, Volodymyr Valentynovych Kukhar et al. · The International Journal of Advanced Manufacturing Technology | 15 Jan 2022 | 41 |
| 18 | Shape Indexes for Dieless Forming of the Elongated Forgings with Sharpened End by Tensile Drawing with Rupture Volodymyr Valentynovych Kukhar, A.V. Grushko, Інна Віштак · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena | Oct 2018 | 40 |
| 19 | Structural and Tribological Studies of “(TiC + WC)/Hardened Steel” PMMC Coating Deposited by Air Pulsed Plasma Yu. G. Chabak, Vasily Georgievich Efremenko, Vadym Zurnadzhy et al. · Metals | 24 Jan 2022 | 39 |
| 20 | High-Temperature Oxidation and Decarburization of 14.55 wt pct Cr-Cast Iron in Dry Air Atmosphere Vasily Georgievich Efremenko, Yu. G. Chabak, Angeliki G. Lekatou et al. · Metallurgical and Materials Transactions A | 22 Jan 2016 | 39 |
| 21 | Green Financial Instruments of Cleaner Production Technologies Viktor V. Koval, Оlga Laktionova, Dzintra Atstāja et al. · Sustainability | 24 Aug 2022 | 38 |
| 22 | Micromechanical, corrosion and wet sliding wear behaviours of Co-28Cr-6Mo alloy: Wrought vs. LPBF Vasily Georgievich Efremenko, Angeliki G. Lekatou, Yu. G. Chabak et al. · Materials Today Communications | 5 Apr 2023 | 37 |
| 23 | Mechanical properties of carbide-free lower bainite in complex-alloyed constructional steel: Effect of bainitizing treatment parameters Vadym Zurnadzhy, Vasily Georgievich Efremenko, Ivan Petryshynets et al. · Kovove Materialy-Metallic Materials | 2020 | 37 |
| 24 | Kinetic Parameters of Secondary Carbide Precipitation in High-Cr White Iron Alloyed by Mn-Ni-Mo-V Complex Vasily Georgievich Efremenko, Yu. G. Chabak, Michail Nikolaevich Brykov · Journal of Materials Engineering and Performance | 29 Nov 2012 | 37 |
| 25 | High-temperature solid particle erosion of Cr–Ni–Fe–C arc cladded coatings Bohdan Efremenko, Kazumichi Shimizu, Nuria Espallargas et al. · Wear | 20 Aug 2020 | 36 |
| 26 | Kinetics of austenite transformation during thermomechanical processes В. М. Хлестов, E. V. Konopleva, H.J. McQueen · Canadian Metallurgical Quarterly | Apr 1998 | 36 |
| 27 | Automatic machine learning algorithms for fraud detection in digital payment systems Oleh M. Kolodiziev, Aleksey Mints, Pavlo Sidelov et al. · Eastern-European Journal of Enterprise Technologies | 31 Oct 2020 | 35 |
| 28 | Improving the Processes of Thermal Preparation of an Automobile Engine with Petrol and Gas Supply Systems (Vehicle Engine with Petrol and LPG Supplying Systems) Igor V. Gritsuk, Dmytro Pohorletskyi, Vasyl Mateichyk et al. · SAE technical papers on CD-ROM/SAE technical paper series | 15 Sep 2020 | 35 |
| 29 | Stress-Strain State and Plasticity Reserve Depletion on the Lateral Surface of Workpiece at Various Contact Conditions During Upsetting Volodymyr Valentynovych Kukhar, Viktor Artiukh, Andrey Butyrin et al. · Advances in intelligent systems and computing | 18 Dec 2017 | 35 |
| 30 | Analysis of the stability factors of Ukrainian banks during the 2014–2017 systemic crisis using the Kohonen self-organizing neural networks Aleksey Mints, Viktoriia Marhasova, Hanna Hlukha et al. · Banks and Bank Systems | 6 Sep 2019 | 34 |
| 31 | Superplastic forming of shells from sheet blanks with thermally unstable coatings A. S. Anishchenko, Volodymyr Valentynovych Kukhar, Viktor Artiukh et al. · MATEC Web of Conferences | 2018 | 34 |
| 32 | Application of G. Lame’s and J. Gielis’ formulas for description of shells superplastic forming A. S. Anishchenko, Volodymyr Valentynovych Kukhar, Viktor Artiukh et al. · MATEC Web of Conferences | 2018 | 34 |
| 33 | Analysis of relation between edging ratio and deformation work done in pre-forming of workpiece by bulk buckling Volodymyr Valentynovych Kukhar, Elena Yu. Balalayeva, Andrii H. Prysiazhnyi et al. · MATEC Web of Conferences | 2018 | 34 |
| 34 | Development of alternative technology of dual forming of profiled workpiece obtained by buckling Volodymyr Valentynovych Kukhar, Vadym Burko, Andrii H. Prysiazhnyi et al. · Eastern-European Journal of Enterprise Technologies | 30 Jun 2016 | 34 |
| 35 | Counting 1-vertex triangulations of oriented surfaces Roland Bacher, Alina Vdovina · Discrete Mathematics | Mar 2002 | 34 |
| 36 | Designing a toolset for the formalized evaluation and selection of reengineering projects to be implemented at an enterprise Iurii Chupryna, Galyna Ryzhakova, Khrystyna Chupryna et al. · Eastern-European Journal of Enterprise Technologies | 28 Feb 2022 | 33 |
| 37 | Electric Motors Power Modes at Synchronization of Roughing Rolling Stands of Hot Strip Mill Oleksandr Kurpe, Volodymyr Valentynovych Kukhar, Ruslan Puzyr et al. · 2020 IEEE Problems of Automated Electrodrive. Theory and Practice (PAEP) | 21 Sep 2020 | 33 |
| 38 | Effect of Particular Combinations of Quenching, Tempering and Carburization on Abrasive Wear of Low-Carbon Manganese Steels with Metastable Austenite Л. С. Малинов, Ирина Евгеньевна Малышева, Eduard S. Klimov et al. · Materials science forum | Feb 2019 | 33 |
| 39 | Analysis of the Sheet Shell's Curvature with Lame's Superellipse Method during Superplastic Forming Олександр Сергійович Аніщенко, Volodymyr Valentynovych Kukhar, A.V. Grushko et al. · Materials science forum | Feb 2019 | 33 |
| 40 | Estimation of occupational safety risks at energetic sector of Iron and Steel Works Volodymyr Valentynovych Kukhar, Nelly Yelistratova, Vadym Burko et al. · International Journal of Engineering & Technology | 20 Apr 2018 | 33 |
| 41 | Experimental Research and Method for Calculation of 'Upsetting-with-Buckling' Load at the Impression-Free (Dieless) Preforming of Workpiece Volodymyr Valentynovych Kukhar, Viktor Artiukh, Andrii H. Prysiazhnyi et al. · E3S Web of Conferences | 2018 | 33 |
| 42 | Green Enterprise Logistics Management System in Circular Economy Viktoriia Bozhanova, Petro Korenyuk, Oleksandr Lozovskyi et al. · International Journal of Mathematical Engineering and Management Sciences | 8 May 2022 | 32 |
| 43 | Structural and Tribological Assessment of Biomedical 316 Stainless Steel Subjected to Pulsed-Plasma Surface Modification: Comparison of LPBF 3D Printing and Conventional Fabrication Yu. G. Chabak, Bohdan Efremenko, Ivan Petryshynets et al. · Materials | 12 Dec 2021 | 32 |
| 44 | Formation mechanism, microstructural features and dry-sliding behaviour of “Bronze/WC carbide” composite synthesised by atmospheric pulsed-plasma deposition Vasily Georgievich Efremenko, Yu. G. Chabak, V.I. Fedun et al. · Vacuum | 31 Dec 2020 | 32 |
| 45 | Designing of induction heaters for the edges of pre-rolled wide ultrafine sheets and strips correlated with the chilling end-effect Volodymyr Valentynovych Kukhar, Andrii H. Prysiazhnyi, Elena Yu. Balalayeva et al. · 2017 International Conference on Modern Electrical and Energy Systems (MEES) | Nov 2017 | 32 |
| 46 | Features of Mathematical Modeling in the Problems of Determining the Power of a Turbocharged Engine According to the Characteristics of the Turbocharger Андрій Ігорович Головань, Igor V. Gritsuk, Vadym Popeliuk et al. · SAE International Journal of Engines | 8 Oct 2019 | 31 |
| 47 | Three-body abrasive wear behaviour of metastable spheroidal carbide cast irons with different chromium contents Vasily Georgievich Efremenko, Kazumichi Shimizu, Т. В. Пастухова et al. · International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) | 27 Nov 2017 | 31 |
| 48 | Structure refinement of high-Cr cast iron by plasma surface melting and post-heat treatment Vasily Georgievich Efremenko, Yu. G. Chabak, Kazumichi Shimizu et al. · Materials & Design | 7 Apr 2017 | 31 |
| 49 | Principles for developing grinding media with increased wear resistance. Part 1. Abrasive wear resistance of iron-based alloys A.D. Koval, Vasily Georgievich Efremenko, Michail Nikolaevich Brykov et al. · Journal of Friction and Wear | Feb 2012 | 31 |
| 50 | Handwritten Digits Recognition Using SVM, KNN, RF and Deep Learning Neural Networks Yevhen Chychkarov, Anastasiia Serhiienko, Iryna Syrmamiikh et al. | 2021 | 30 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.