Most cited papers from RHP Technology (Austria)

RHP Technology (Austria)

What are the most cited papers from RHP Technology (Austria)?

The most cited paper from RHP Technology (Austria) is "Potential and challenges of metal-matrix-composites reinforced with carbon nanofibers and carbon nanotubes" (Erich Neubauer, Michael Kitzmantel, Martin Hulman et al., 2010), with 216 citations. Next come "Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components" (188) and "Microstructure and mechanical properties of Ni1,5Co1,5CrFeTi0,5 high entropy alloy fabricated by mechanical alloying and spark plasma sintering" (150).

Published TypeFieldAccessCitations

Showing 50 of 61 papers. Every paper with more than 4 citations is listed.

Most cited papers, sortable by citations and release date
#	Paper
1	Potential and challenges of metal-matrix-composites reinforced with carbon nanofibers and carbon nanotubes Erich Neubauer, Michael Kitzmantel, Martin Hulman et al. · Composites Science and Technology Open access	23 Sep 2010	216
2	Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components Walter Lengauer, Ivica Ðuretek, Markus Fürst et al. · International Journal of Refractory Metals and Hard Materials	17 Apr 2019	188
3	Microstructure and mechanical properties of Ni1,5Co1,5CrFeTi0,5 high entropy alloy fabricated by mechanical alloying and spark plasma sintering Igor Moravčík, Jan Čížek, Jozef Zapletal et al. · Materials & Design	16 Jan 2017	150
4	Mechanical and microstructural characterization of powder metallurgy CoCrNi medium entropy alloy Igor Moravčík, Jan Čížek, Zuzana Kováčová et al. · Materials Science and Engineering A	23 Jun 2017	126
5	Aerosolized ribavirin in the treatment of patients with respiratory syncytial virus disease WILLIAM J. RODRIGEUZ, Hyun W Kim, Carl D. Brandt et al. · The Pediatric Infectious Disease Journal	Feb 1987	116
6	A Pilot Study to Assess the Efficacy of Tariquidar to Inhibit P-glycoprotein at the Human Blood–Brain Barrier with (R)-11C-Verapamil and PET Claudia Christina Wagner, Martin Bauer, Rudolf Karch et al. · Journal of Nuclear Medicine Open access	12 Nov 2009	113
7	Synergic strengthening by oxide and coherent precipitate dispersions in high-entropy alloy prepared by powder metallurgy Igor Moravčík, Larissa Moravcikova-Gouvea, Vít Horník et al. · Scripta Materialia	29 Jul 2018	93
8	Fracture and mechanical properties of lightweight alumina ceramics prepared by fused filament fabrication Martina Horváth Orlovská, Zdeněk Chlup, Ľuboš Bača et al. · Journal of the European Ceramic Society	13 Feb 2020	60
9	Effect of metallic dopants on the microstructure and mechanical properties of TiB2 Zdeněk Chlup, Ľuboš Bača, Martina Halasová et al. · Journal of the European Ceramic Society	11 Apr 2015	60
10	Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering Joamin González-Gutiérrez, Santiago Cano, Josef Valentin Ecker et al. · Applied Sciences Open access	6 Aug 2021	56
11	Influence of sintering temperature, SiC particle size and Y 2 O 3 addition on the densification, microstructure and oxidation resistance of ZrB 2 –SiC ceramics Zuzana Kováčová, Ľuboš Bača, Erich Neubauer et al. · Journal of the European Ceramic Society	2 Jan 2016	49
12	Imaging P‐Glycoprotein Function at the Blood–Brain Barrier as a Determinant of the Variability in Response to Central Nervous System Drugs Martin Bauer, Nicolas Tournier, Oliver Langer · Clinical Pharmacology & Therapeutics Open access	23 Mar 2019	48
13	Characterisation of sputter deposited niobium and boron interlayer in the copper–diamond system J. Hell, M. Chirtoc, Ch Eisenmenger-Sittner et al. · Surface and Coatings Technology Open access	Aug 2012	48
14	Mechanical properties and microstructural evolution of vacuum hot-pressed titanium and Ti–6Al–7Nb alloy L. Bolzoni, Elisa María Ruiz-Navas, Erich Neubauer et al. · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials Open access	31 Jan 2012	46
15	The AETHER project: development of air-breathing electric propulsion for VLEO missions Tommaso Andreussi et al. · CEAS Space Journal	29 Apr 2022	45
16	Influence of Binder Composition and Material Extrusion (MEX) Parameters on the 3D Printing of Highly Filled Copper Feedstocks Mahrukh Sadaf, Santiago Cano, Joamin González-Gutiérrez et al. · Polymers Open access	16 Nov 2022	44
17	Magnesium Alloys Processed by Severe Plastic Deformation (SPD) for Biomedical Applications: An Overview Krzysztof Bryła, Jelena Horky · MATERIALS TRANSACTIONS Open access	8 Jun 2023	36
18	Tailoring a Refractory High Entropy Alloy by Powder Metallurgy Process Optimization Larissa Moravcikova-Gouvea, Igor Moravčík, Václav Pouchlý et al. · Materials Open access	3 Oct 2021	36
19	Material extrusion additively manufactured alumina monolithic structures to improve the efficiency of plasma-catalytic oxidation of toluene Ting Li, Joamin González-Gutiérrez, Ivan Raguž et al. · Additive manufacturing	10 Nov 2020	28
20	The effect of YB4 addition in ZrB2-SiC composites on the mechanical properties and oxidation performance tested up to 2000 °C Zuzana Kováčová, Ľubomír Orovčík, Jaroslav Sedláček et al. · Journal of the European Ceramic Society	5 May 2020	28
21	Preparation of fully dense boron carbide ceramics by Fused Filament Fabrication (FFF) Mária Vozárová, Erich Neubauer, Ľuboš Bača et al. · Journal of the European Ceramic Society	14 Dec 2022	26
22	Process modeling and control for additive manufacturing of Ti-6Al-4V using plasma arc welding - methodology and experimental validation Tamara Kopf, Tobias Glück, Dieter Gruber et al. · Journal of Manufacturing Processes Open access	27 Jul 2024	25
23	Sinterability, Mechanical Properties and Wear Behavior of Ti3SiC2 and Cr2AlC MAX Phases Eduardo Tabares, Michael Kitzmantel, Erich Neubauer et al. · Ceramics Open access	31 Jan 2022	24
24	Processing by Additive Manufacturing Based on Plasma Transferred Arc of Hastelloy in Air and Argon Atmosphere Eva Maria Perez-Soriano, Enrique Ariza, Cristina M. Arévalo et al. · Metals Open access	30 Jan 2020	24
25	Analysis of the Microstructure and Mechanical Properties of Titanium-Based Composites Reinforced by Secondary Phases and B4C Particles Produced via Direct Hot Pressing Isabel Montealegre-Meléndez, Cristina M. Arévalo, Enrique Ariza et al. · Materials Open access	27 Oct 2017	24
26	Microstructure evolution and tribological properties of TiB2/Ni–Ta cermets Ľuboš Bača, Zoltán Lenčéš, Christian Jogl et al. · Journal of the European Ceramic Society	18 Nov 2011	22
27	Microstructural and XRD Analysis and Study of the Properties of the System Ti-TiAl-B4C Processed under Different Operational Conditions Isabel Montealegre-Meléndez, Cristina M. Arévalo, Eva Maria Perez-Soriano et al. · Metals Open access	21 May 2018	21
28	Nanostructure Tuning of Gold Nanoparticles Films via Click Sintering Massimo Urban, Giulio Rosati, Gabriel Maroli et al. · Small Open access	14 Nov 2023	20
29	Y3Al5O12-α-Al2O3 composites with fine-grained microstructure by hot pressing of Al2O3-Y2O3 glass microspheres Anna Prnová, Jana Valúchová, Milan Parchovianský et al. · Journal of the European Ceramic Society	18 Oct 2019	19
30	Influence of Sintering Temperature on the Microstructure and Mechanical Properties of In Situ Reinforced Titanium Composites by Inductive Hot Pressing Cristina M. Arévalo, Isabel Montealegre-Meléndez, Enrique Ariza et al. · Materials Open access	11 Nov 2016	19
31	Analysis of the Influence of Starting Materials and Processing Conditions on the Properties of W/Cu Alloys Isabel Montealegre-Meléndez, Cristina M. Arévalo, Eva Maria Perez-Soriano et al. · Materials Open access	8 Feb 2017	18
32	Extrusion-based additive manufacturing of Ti3SiC2 and Cr2AlC MAX phases as candidates for high temperature heat exchangers Eduardo Tabares, Michael Kitzmantel, Erich Neubauer et al. · Journal of the European Ceramic Society	28 Oct 2021	17
33	Monitoring of critical processing steps during the production of high dense 3D alumina parts using Fused Filament Fabrication technology Martina Horváth Orlovská, Miroslav Hain, Michael Kitzmantel et al. · Additive manufacturing	12 Oct 2021	15
34	Synthesis and reaction sintering of YB4 ceramics Zuzana Kováčová, Ľuboš Bača, Erich Neubauer et al. · Ceramics International	14 Jun 2019	15
35	Replication of Overmolded Orthopedic Implants with a Functionalized Thin Layer of Biodegradable Polymer Ahmed Elkaseer, Tobias Mueller, Sabino Azcárate et al. · Polymers Open access	26 Jun 2018	15
36	Influence of Ti on the Tensile Properties of the High-Strength Powder Metallurgy High Entropy Alloys Igor Moravčík, Štěpán Gamanov, Larissa Moravcikova-Gouvea et al. · Materials Open access	26 Jan 2020	13
37	Phase transformation pathways in a Ti-5.9Cu alloy modified with Fe and Al Thomas B. Klein, Duyao Zhang, Ella Staufer et al. · Journal of Materials Research and Technology Open access	Nov 2023	12
38	Characterization of the mechanical and thermal interface of copper films on carbon substrates modified by boron based interlayers David Schäfer, Ch Eisenmenger-Sittner, M. Chirtoc et al. · Surface and Coatings Technology Open access	22 Jan 2011	12
39	Comparative analysis of binder systems in copper feedstocks for metal extrusion additive manufacturing and metal injection moulding Mahrukh Sadaf, Santiago Cano, Mario Bragaglia et al. · Journal of Materials Research and Technology Open access	21 Feb 2024	11
40	Thermal Characterization of Metal-Diamond Composite Heat Spreaders Using Low-Frequency-Domain Thermoreflectance Zeina Abdallah, James W. Pomeroy, Erich Neubauer et al. · ACS Applied Electronic Materials Open access	14 Sep 2023	10
41	Study of the alumina sintering process with a low zirconia content Martina Horváth Orlovská, L. Húlek, Ľuboš Bača et al. · Ceramics International	13 Oct 2021	10
42	In-situ high-temperature X-ray diffraction investigations of magnetron sputtered niobium oxide layers up to 900 °C P. Angerer, Vincent van Karsbergen, Nikolaus Weinberger et al. · Thin Solid Films	3 Feb 2019	9
43	Fostering Cyber Resilience in Europe: An In-Depth Exploration of the Cyber Resilience Act Christoph Schmittner, Omar Veledar, Thomas Faschang et al. · Communications in computer and information science Conference paper	2024	8
44	Additive manufacturing of maraging steel on a copper substrate using selective laser melting Christopher J. Wallis, Bruno Buchmayr, Michael Kitzmantel et al.	24 Nov 2016	8
45	Effects of Heat Treatment and Processing Conditions on the Microstructure and Mechanical Properties of a Novel Ti–6.3Cu–2.2Fe–2.1Al Alloy Martin J. Klein, Ella Staufer, Christian Edtmaier et al. · Advanced Engineering Materials Open access	Jul 2024	7
46	Multifunctional Ti3AlC2-Based Composites via Fused Filament Fabrication and 3D Printing Technology Dongyan Liu, Lukas Hentschel, Guoming Lin et al. · Journal of Materials Engineering and Performance Open access	25 Apr 2023	7
47	Innovative hybrid heat sink materials with high thermal conductivities and tailored CTE Michael Kitzmantel, Erich Neubauer · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE Conference paper	20 Feb 2015	7
48	Influence of starting powders on the final properties of W-Cu alloys manufactured through rapid sinter pressing technique Eva Maria Perez-Soriano, Cristina M. Arévalo, Isabel Montealegre-Meléndez et al. · Powder Metallurgy	21 Nov 2020	6
49	Ti/B4C Composites Prepared by In Situ Reaction Using Inductive Hot Pressing Enrique Ariza Galván, Isabel Montealegre-Meléndez, Cristina M. Arévalo et al. · Key engineering materials	3 Jul 2017	6
50	Influence of Processing Conditions on the Mechanical Properties of 17-4PH Specimens Produced by Additive Manufacturing Enrique Ariza, Isabel Montealegre-Meléndez, Eva Maria Perez-Soriano et al. · Machines Open access	26 Oct 2022	5

Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.