Institution · Safran (France)
Most cited papers from Safran (France)
What are the most cited papers from Safran (France)?
The most cited paper from Safran (France) is "Vehicle detection in aerial imagery : A small target detection benchmark" (Sébastien Razakarivony, Frédéric Jurie, 2015), with 906 citations. Next come "The Invariant Extended Kalman Filter as a Stable Observer" (636) and "Breaking Cryptographic Implementations Using Deep Learning Techniques" (527).
Showing 50 of 60 papers. Every paper with more than 89 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Vehicle detection in aerial imagery : A small target detection benchmark Sébastien Razakarivony, Frédéric Jurie · Journal of Visual Communication and Image Representation | 18 Nov 2015 | 906 |
| 2 | The Invariant Extended Kalman Filter as a Stable Observer Axel Barrau, Silvère Bonnabel · IEEE Transactions on Automatic Control | 27 Jul 2016 | 636 |
| 3 | Breaking Cryptographic Implementations Using Deep Learning Techniques Houssem Maghrebi, Thibault Portigliatti, Emmanuel Prouff · Lecture notes in computer science | 2016 | 527 |
| 4 | Optimization of a dielectric barrier discharge actuator by stationary and non-stationary measurements of the induced flow velocity: application to airflow control Maxime Forte, J. Jolibois, Jérôme Pons et al. · Experiments in Fluids | 31 Jul 2007 | 504 |
| 5 | Convolutional Neural Networks with Data Augmentation Against Jitter-Based Countermeasures Eleonora Cagli, Cécile Dumas, Emmanuel Prouff · Lecture notes in computer science | 2017 | 366 |
| 6 | AI-IMU Dead-Reckoning Martin Brossard, Axel Barrau, Silvère Bonnabel · IEEE Transactions on Intelligent Vehicles | 13 Mar 2020 | 320 |
| 7 | LES of an ignition sequence in a gas turbine engine Matthieu Boileau, Gabriel Staffelbach, Bénédicte Cuenot et al. · Combustion and Flame | 23 Apr 2008 | 301 |
| 8 | Thermodynamic analysis of a gas turbine engine with a rotating detonation combustor Jorge Sousa, Guillermo Paniagua, Elena Collado Morata · Applied Energy | 18 Mar 2017 | 260 |
| 9 | Invariant Kalman Filtering Axel Barrau, Silvère Bonnabel · Annual Review of Control Robotics and Autonomous Systems | 20 Dec 2017 | 227 |
| 10 | Acoustic and Large Eddy Simulation studies of azimuthal modes in annular combustion chambers Pierre Wolf, Gabriel Staffelbach, Laurent Y. M. Gicquel et al. · Combustion and Flame | 30 Aug 2012 | 225 |
| 11 | Microstructural Evolutions During Thermal Aging of Alloy 625: Impact of Temperature and Forming Process Lorena Mataveli Suave, Jonathan Cormier, Patrick Villechaise et al. · Metallurgical and Materials Transactions A | 18 Mar 2014 | 199 |
| 12 | Topology optimization of modulated and oriented periodic microstructures by the homogenization method Grégoire Allaire, Perle Geoffroy‐Donders, Olivier Pantz · Computers & Mathematics with Applications | 28 Aug 2018 | 192 |
| 13 | Advanced bearing diagnostics: A comparative study of two powerful approaches Dany Abboud, Mohamed El Badaoui, Wade A. Smith et al. · Mechanical Systems and Signal Processing | 30 May 2018 | 170 |
| 14 | High temperature oxidation of IN 718 manufactured by laser beam melting and electron beam melting: Effect of surface topography Tom Sanviemvongsak, Daniel Monceau, Bruno Macquaire · Corrosion Science | 11 Jul 2018 | 162 |
| 15 | Thermal insulation properties of YSZ coatings: Suspension Plasma Spraying (SPS) versus Electron Beam Physical Vapor Deposition (EB-PVD) and Atmospheric Plasma Spraying (APS) Benjamin C. Bernard, Aurélie Quet, Luc Bianchi et al. · Surface and Coatings Technology | 5 Jun 2016 | 162 |
| 16 | Damage investigation and modeling of 3D woven ceramic matrix composites from X-ray tomography in-situ tensile tests Vincent Mazars, Olivier Caty, Guillaume Couégnat et al. · Acta Materialia | 18 Aug 2017 | 157 |
| 17 | Influence of strain rate on subsolvus dynamic and post-dynamic recrystallization kinetics of Inconel 718 Alexis Nicolaÿ, Gilbert Fiorucci, Jean‐Michel Franchet et al. · Acta Materialia | 31 May 2019 | 156 |
| 18 | On the role of heterogeneous reactions in aluminum combustion Julien Glorian, Stany Gallier, L. Catoire · Combustion and Flame | 9 Apr 2016 | 156 |
| 19 | Development and assessment of a coupled strategy for conjugate heat transfer with Large Eddy Simulation: Application to a cooled turbine blade Florent Duchaine, A. Corpron, L Pons et al. · International Journal of Heat and Fluid Flow | 4 Sep 2009 | 151 |
| 20 | 2D axial-azimuthal particle-in-cell benchmark for low-temperature partially magnetized plasmas Thomas Charoy, Jean-Pierre Bœuf, Anne Bourdon et al. · Plasma Sources Science and Technology | 23 Sep 2019 | 147 |
| 21 | Fully Integrated FPGA-Based Controller for Synchronous Motor Drive Lahoucine Idkhajine, Éric Monmasson, Mohamed Wissem Naouar et al. · IEEE Transactions on Industrial Electronics | 28 Apr 2009 | 146 |
| 22 | Intergranular oxidation of Ni-base alloy 718 with a focus on additive manufacturing Tom Sanviemvongsak, Daniel Monceau, Clara Desgranges et al. · Corrosion Science | 19 Apr 2020 | 144 |
| 23 | The contribution of carbon dioxide emissions from the aviation sector to future climate change Etienne Terrenoire, Didier A. Hauglustaine, Thomas Gasser et al. · Environmental Research Letters | 9 Jul 2019 | 144 |
| 24 | Numerical modeling of 3D woven composite reinforcements: A review Yanneck Wielhorski, Arturo Mendoza, Marcello Rubino et al. · Composites Part A Applied Science and Manufacturing | 3 Dec 2021 | 141 |
| 25 | Body-fitted topology optimization of 2D and 3D fluid-to-fluid heat exchangers Florian Feppon, Grégoire Allaire, Charles Dapogny et al. · Computer Methods in Applied Mechanics and Engineering | 10 Jan 2021 | 138 |
| 26 | Comparison of LES, RANS and experiments in an aeronautical gas turbine combustion chamber Guillaume Boudier, Laurent Y. M. Gicquel, Thierry J. Poinsot et al. · Proceedings of the Combustion Institute | 25 Aug 2006 | 131 |
| 27 | CMC thermal protection system for future reusable launch vehicles: Generic shingle technological maturation and tests Thierry Pichon, R. Barreteau, Philippe Soyris et al. · Acta Astronautica | 5 Mar 2009 | 131 |
| 28 | HRG by SAFRAN: The game-changing technology Fabrice Delhaye | Mar 2018 | 129 |
| 29 | Step-by-step investigation of degradation mechanisms induced by CMAS attack on YSZ materials for TBC applications Guillaume Pujol, Florence Ansart, Jean-Pierre Bonino et al. · Surface and Coatings Technology | 4 Sep 2013 | 127 |
| 30 | Machinability of inconel 718 during turning: Cutting force model considering tool wear, influence on surface integrity Bastien Toubhans, Guillaume Fromentin, Fabien Viprey et al. · Journal of Materials Processing Technology | 20 Jun 2020 | 125 |
| 31 | Qualitative analysis of forced response of blisks with friction ring dampers Denis Laxalde, Fabrice Thouverez, Jean-Jacques Sinou et al. · European Journal of Mechanics - A/Solids | 8 Nov 2006 | 125 |
| 32 | Blade vibration study by spectral analysis of tip-timing signals with OMP algorithm Antoine Bouchain, José Picheral, Elisabeth Lahalle et al. · Mechanical Systems and Signal Processing | 9 May 2019 | 124 |
| 33 | Ignition dynamics of an annular combustor equipped with multiple swirling injectors Jean-François Bourgouin, Daniel Durox, Thierry Schuller et al. · Combustion and Flame | 16 Apr 2013 | 121 |
| 34 | Viscoplastic constitutive equations of combustion chamber materials including cyclic hardening and dynamic strain aging J.L. Chaboche, Anaïs Gaubert, Pascale Kanouté et al. · International Journal of Plasticity | 5 Oct 2012 | 117 |
| 35 | Processing a non-weldable nickel-base superalloy by Selective Laser Melting: role of the shape and size of the melt pools on solidification cracking David Grange, J.D. Bartout, Bruno Macquaire et al. · Materialia | 22 May 2020 | 115 |
| 36 | LOFAR sparse image reconstruction Hugh Garsden et al. · Astronomy and Astrophysics | 24 Dec 2014 | 109 |
| 37 | Enhanced modeling of 3D composite preform deformations taking into account local fiber bending stiffness Sylvain Mathieu, Nahiène Hamila, F. Bouillon et al. · Composites Science and Technology | 15 Jul 2015 | 108 |
| 38 | Forced Response Analysis of Integrally Bladed Disks With Friction Ring Dampers Denis Laxalde, Fabrice Thouverez, Jean-Pierre Lombard · Journal of vibration and acoustics | Feb 2010 | 104 |
| 39 | Investigation of Two-Fluid Methods for Large Eddy Simulation of Spray Combustion in Gas Turbines Matthieu Boileau, Stéphane Pascaud, Éléonore Riber et al. · Flow Turbulence and Combustion | 11 Dec 2007 | 104 |
| 40 | Progress and challenges in swirling flame dynamics Sébastien Candel, Daniel Durox, Thierry Schuller et al. · Comptes Rendus Mécanique | Nov 2012 | 104 |
| 41 | Anodizing of multiphase aluminium alloys in sulfuric acid: in-situ electrochemical behaviour and oxide properties Delphine Veys‐Renaux, Najat Chahboun, Emmanuel Rocca · Electrochimica Acta | 26 Jun 2016 | 103 |
| 42 | Analysis of CM Volt-Second Influence on CM Inductor Saturation and Design for Input EMI Filters in Three-Phase DC-Fed Motor Drive Systems Fang Lin Luo, Shuo Wang, Fei Wang et al. · IEEE Transactions on Power Electronics | Mar 2010 | 102 |
| 43 | Two-dimensional modeling of an aircraft engine structural bladed disk-casing modal interaction Mathias Legrand, Christophe Pierre, Patrice Cartraud et al. · Journal of Sound and Vibration | 28 Aug 2008 | 101 |
| 44 | VHCF life evolution after microstructure degradation of a Ni-based single crystal superalloy Alice Cervellon, Jonathan Cormier, F. Mauget et al. · International Journal of Fatigue | 20 Jul 2017 | 100 |
| 45 | Short crack propagation from cracked non-metallic inclusions in a Ni-based polycrystalline superalloy Damien Texier, Jean‐Charles Stinville, McLean P. Echlin et al. · Acta Materialia | 28 Nov 2018 | 99 |
| 46 | Very High Cycle Fatigue of Ni-Based Single-Crystal Superalloys at High Temperature Alice Cervellon, Jonathan Cormier, F. Mauget et al. · Metallurgical and Materials Transactions A | 17 May 2018 | 99 |
| 47 | Controlling the MC and M2C carbide precipitation in Ferrium® M54® steel to achieve optimum ultimate tensile strength/fracture toughness balance Aurélien Mondière, V. Déneux, Nicolas Binot et al. · Materials Characterization | 28 Mar 2018 | 99 |
| 48 | 2D radial-azimuthal particle-in-cell benchmark for E × B discharges Willca Villafana, Federico Petronio, A. C. Denig et al. · Plasma Sources Science and Technology | 10 Jun 2021 | 97 |
| 49 | Topology optimization of thermal fluid–structure systems using body-fitted meshes and parallel computing Florian Feppon, Grégoire Allaire, Charles Dapogny et al. · Journal of Computational Physics | 22 May 2020 | 96 |
| 50 | Heteroepitaxial recrystallization: A new mechanism discovered in a polycrystalline γ-γ′ nickel based superalloy Marie‐Agathe Charpagne, Thomas Billot, Jean‐Michel Franchet et al. · Journal of Alloys and Compounds | 26 Jul 2016 | 96 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.