Institution · Saint-Gobain (Germany)
Most cited papers from Saint-Gobain (Germany)
What are the most cited papers from Saint-Gobain (Germany)?
The most cited paper from Saint-Gobain (Germany) is "Chemical activation of hybrid binders based on siliceous fly ash and Portland cement" (Salaheddine Alahraché, Frank Winnefeld, Jean‐Baptiste Champenois et al., 2015), with 157 citations. Next come "Nature–Inspired self–cleaning surfaces: Mechanisms, modelling, and manufacturing" (141) and "Motion Planning for Industrial Robots using Reinforcement Learning" (79).
Showing 50 of 91 papers. Every paper is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Chemical activation of hybrid binders based on siliceous fly ash and Portland cement Salaheddine Alahraché, Frank Winnefeld, Jean‐Baptiste Champenois et al. · Cement and Concrete Composites | 6 Nov 2015 | 157 |
| 2 | Nature–Inspired self–cleaning surfaces: Mechanisms, modelling, and manufacturing Cunming Yu, Srdjan Sasic, Kai Liu et al. · Process Safety and Environmental Protection | 2 Jan 2020 | 141 |
| 3 | Motion Planning for Industrial Robots using Reinforcement Learning Richard Meyes, Hasan Tercan, Simon Roggendorf et al. · Procedia CIRP | 2017 | 79 |
| 4 | A Study on Ultrasonic Assisted Creep Feed Grinding of Nickel Based Superalloys Debajyoti Bhaduri, Sein Leung Soo, D.K. Aspinwall et al. · Procedia CIRP | 2012 | 70 |
| 5 | Failure load prediction of adhesively bonded single lap joints by using various FEM techniques Mohammad Zamaan Sadeghi, A. Gabener, Jannik Zimmermann et al. · International Journal of Adhesion and Adhesives | 16 Nov 2019 | 65 |
| 6 | Experimental investigation of compact silicon carbide heat exchangers for high temperatures Thomas Fend, Wilhelm Völker, Rolf Miebach et al. · International Journal of Heat and Mass Transfer | 22 Jun 2011 | 64 |
| 7 | Ultrasonic Assisted Creep Feed Grinding of Inconel 718 Debajyoti Bhaduri, Sein Leung Soo, Donka Novovic et al. · Procedia CIRP | 2013 | 62 |
| 8 | Ultrasonic assisted creep feed grinding of gamma titanium aluminide using conventional and superabrasive wheels Debajyoti Bhaduri, Sein Leung Soo, D.K. Aspinwall et al. · CIRP Annals | 2017 | 59 |
| 9 | Controlling the buckling instability of drying droplets of suspensions through colloidal interactions Eric Lintingre, Guylaine Ducouret, François Lequeux et al. · Soft Matter | 2015 | 50 |
| 10 | Sheet Metal Testing and Flow Curve Determination under Multiaxial Conditions Sebastian Dziallach, Wolfgang Peter Bleck, Michael Blumbach et al. · Advanced Engineering Materials | Nov 2007 | 44 |
| 11 | The 2-ID-B intermediate-energy scanning X-ray microscope at the APS Ian McNulty, David John Paterson, J. Arko et al. · Journal de Physique IV (Proceedings) | Mar 2003 | 32 |
| 12 | CdTe solar cell with industrial Al:ZnO on soda-lime glass Ramesh G. Dhere, M. Bonnet-Eymard, Émilie Charlet et al. · Thin Solid Films | 22 Dec 2010 | 29 |
| 13 | Spontaneous cracking of thermally toughened safety glass. Part one: Properties of nickel sulphide inclusions Andreas M. Kasper · Glass Structures & Engineering | 29 Aug 2018 | 28 |
| 14 | Prognostic Model Development with Missing Labels Patrick Zschech, Kai Heinrich, Raphael Bink et al. · Business & Information Systems Engineering | Apr 2019 | 25 |
| 15 | Color coated glazing for next generation BIPV: performance vs aesthetics Benjamin Riedel, Paul Messaoudi, Y.B. Assoa et al. · EPJ Photovoltaics | 2021 | 22 |
| 16 | The role of lattice oxygen in CO oxidation over Ce 18 O 2 -based catalysts revealed under operando conditions Bartosz Penkala, Daniel Aubert, Helena Kaper et al. · Catalysis Science & Technology | 2015 | 20 |
| 17 | Biogas as a co-firing fuel in thermal processing industries: implementation in a glass melting furnace Marcel Fiehl, Jörg Leicher, Anne Giese et al. · Energy Procedia | Aug 2017 | 19 |
| 18 | Reactivity of Gypsum-Based Materials Subjected to Thermal Load: Investigation of Reaction Mechanisms Felix Krause, Bernhard Renner, Frederik Coppens et al. · Materials | 20 Mar 2020 | 16 |
| 19 | Noise — A Stressor? Acoustic Ergonomics of Schools Gerhart Tiesler, Markus Oberdörster · Building Acoustics | Sep 2008 | 16 |
| 20 | Minimizing Filter Volume by Design Optimization Anthony Briot, Francisco Carranza, Patrick Girot et al. · SAE technical papers on CD-ROM/SAE technical paper series | 16 Apr 2007 | 15 |
| 21 | Spontaneous cracking of thermally toughened safety glass part three: statistic evaluation of field breakage records and consequences for residual breakage probability Andreas M. Kasper · Glass Structures & Engineering | 18 Dec 2018 | 14 |
| 22 | Spontaneous cracking of thermally toughened safety glass Part two: Nickel sulphide inclusions identified in annealed glass Andreas M. Kasper, Nho Pyeonglae, Zheng Jun Yuan · Glass Structures & Engineering | 18 Dec 2018 | 14 |
| 23 | Unraveling the effect of ZrO 2 modifiers on the nature of active sites on AuRu/ZrO 2 catalysts for furfural hydrogenation Sara Morandi, Maela Manzoli, Carine Edith Chan-Thaw et al. · Sustainable Energy & Fuels | 16 Dec 2019 | 13 |
| 24 | Generation of 3-dimensional multi-patches on silica particles via printing with wrinkled stamps Daniela John, Marc Zimmermann, Alexander Böker · Soft Matter | 2018 | 12 |
| 25 | Selective energy contacts for potential application to hot carrier PV cells Gavin Conibeer, Chu-Wei Jiang, Martin Andrew Green et al. · 3rd World Conference onPhotovoltaic Energy Conversion, 2003. Proceedings of | 18 May 2003 | 12 |
| 26 | Gaining IIoT insights by leveraging ontology-based modelling of raw data and Digital Shadows Christian Brecher, Melanie Buchsbaum, Aleksandra Müller et al. | 10 May 2021 | 11 |
| 27 | Employee Turnover and Organizational Performance: a Study of the Brazilian Retail Sector Luciana Ferreira, Ciro Barbosa de Aquino Almeida · Brazilian Business Review | Jul 2015 | 11 |
| 28 | Erosion and High Temperature Oxidation Resistance of New Coatings Fabricated by a Sol-Gel Route for a TBC Application Céline Viazzi, Richard G. Wellman, Djar Oquab et al. · Materials science forum | 9 Sep 2008 | 11 |
| 29 | Uptake and reactivity of formaldehyde on lime-cement-plaster under typical indoor air conditions Raphaël Brun, Marie Verrièle, Manolis N. Romanías et al. · Building and Environment | 27 Dec 2022 | 10 |
| 30 | Full Scale Tests on Grid Reinforced Flexible Pavements on the French Fatigue Carrousel Pierre Hornych, Jean-Pierre Kerzrého, Juliette Sohm et al. · Rilem bookseries | 2012 | 10 |
| 31 | Analytical stiffness analysis of adhesively bonded single-lap joints subjected to out-of-plane deflection due to tensile loading Jannik Zimmermann, T. Schalm, Mohammad Zamaan Sadeghi et al. · The Journal of Adhesion | 30 Jun 2021 | 9 |
| 32 | On the bondline thickness effect in mixed-mode fracture characterisation of an epoxy adhesive Mohammad Zamaan Sadeghi, Jannik Zimmermann, A. Gabener et al. · The Journal of Adhesion | 25 Aug 2019 | 9 |
| 33 | Analysis of the Relative Velocity and Its Influence on the Process Results in Unguided Vibratory Finishing Maximilian Lachenmaier, Richard Brocker, Daniel Trauth et al. · Journal of Manufacturing Science and Engineering | 24 Nov 2017 | 9 |
| 34 | Ein Modell zur Bestimmung der Versagenswahrscheinlichkeit von heißgelagertem ESG Jens Schneider, Jonas Hilcken, Andreas M. Kasper · Stahlbau | Apr 2012 | 9 |
| 35 | Low-Temperature Selective Oxidative Dehydrogenation of Cyclohexene by Titania-Supported Nanostructured Pd, Pt, and Pt–Pd Catalytic Films Mykhailo Vaidulych, L.‐S. R. YEH, Robin Hoehner et al. · The Journal of Physical Chemistry C | 16 Feb 2024 | 8 |
| 36 | Spontaneous cracking of thermally toughened safety glass. Part four: a case study of isothermal breakages in a building, and conclusions thereof for the heat soak test Andreas M. Kasper, Frank Rubbert · Glass Structures & Engineering | 14 May 2020 | 8 |
| 37 | “Modern Teaching” Needs Modern Conditions — Communication Behaviour of Pupils and Teachers in Highly Absorbent Classrooms Markus Oberdörster, Gerhart Tiesler · Building Acoustics | Dec 2008 | 8 |
| 38 | Influence of fracture envelope on FE failure load prediction of adhesively bonded joints by using mixed mode bending tests Mohammad Zamaan Sadeghi, Jannik Zimmermann, K. Saravana et al. · Procedia Structural Integrity | 2020 | 7 |
| 39 | A GENERALIZED OHNESORGE NOMOGRAM FOR LIQUID JET BREAKUP REGIMES Günter Brenn, Marius Stelter · Atomization and Sprays | 2020 | 7 |
| 40 | Ermittlung von Berechnungskennwerten an Karosseriewerkstoffen – Bericht über ein Gemeinschaftsprojekt der Stahl‐ und Automobilindustrie Wolfgang Peter Bleck, Bernhard Engl, Anica Frehn et al. · Materialwissenschaft und Werkstofftechnik | 21 Jul 2004 | 7 |
| 41 | Anti-Reflective-Coating Tuned for Higher Solar Module Voltage M. Neander, F. Gromball, Dirk Neumann et al. | 2006 | 6 |
| 42 | Saint-Gobain's All Ceramic SOFC Stack: Architecture and Performance Sean Giles, Guangyong Lin, Aravind Mohanram et al. · ECS Transactions | 6 Oct 2013 | 6 |
| 43 | Valeur de marque et réputation : un enjeu majeur de la nouvelle gouvernance David-Anthony Delavoët, Arnaud Dupui-Castérès, Lionel Benatia · Sécurité et stratégie | Jun 2011 | 6 |
| 44 | Elaboration of Sol-Gel Coatings from Aerogels and Xerogels of Doped Zirconia for TBC Applications Justine Fenech, Céline Viazzi, Florence Ansart et al. · Advanced materials research | 12 Jan 2010 | 4 |
| 45 | Measurement of local contact zone forces in rotational grinding of silicon wafers Dietmar Pähler · International Journal of Mechatronics and Manufacturing Systems | 2011 | 4 |
| 46 | Mitigation of indoor pollution events by lime-cement plasters: Full-scale assessment Raphaël Brun, Vincent GAUDION, Marie Verrièle et al. · Atmospheric Environment | 14 Dec 2024 | 3 |
| 47 | How users make online privacy decisions in work and personal contexts of use Jennifer Klütsch, Christian Böffel, Lukas Abraham et al. · Scientific Reports | 27 Aug 2024 | 3 |
| 48 | Strain localization in ductile materials: Assessment of three X-FEM-based enrichment methods Johannes Wolf, Patrice Longère, Jean-Philippe Crété et al. · Mechanics Research Communications | 4 Jun 2019 | 3 |
| 49 | The separation of CO2 from ambient air – A techno-economic assessment Daniel Krekel, Remzi Can Samsun, Ralf Peters et al. · Applied Energy | 18 Mar 2018 | 3 |
| 50 | Phase Transformations in the NiS Nickel Sulphide: Microstructure, Mechanisms and Modelling through In Situ Microscopy. Oussama Yousfi, Yves J. M. Brechet, P. Donnadieu et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena | 30 Jun 2011 | 3 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.