Institution · Sciperio (United States)
Most cited papers from Sciperio (United States)
What are the most cited papers from Sciperio (United States)?
The most cited paper from Sciperio (United States) is "The design synthesis of multiband artificial magnetic conductors using high impedance frequency selective surfaces" (Douglas J. Kern, Douglas H. Werner, Agostino Monorchio et al., 2005), with 385 citations. Next come "Three-Dimensional BioAssembly Tool for Generating Viable Tissue-Engineered Constructs" (361) and "Femtosecond versus nanosecond laser machining: comparison of induced stresses and structural changes in silicon wafers" (160).
Showing 50 of 72 papers. Every paper is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | The design synthesis of multiband artificial magnetic conductors using high impedance frequency selective surfaces Douglas J. Kern, Douglas H. Werner, Agostino Monorchio et al. · IEEE Transactions on Antennas and Propagation | 2005 | 385 |
| 2 | Three-Dimensional BioAssembly Tool for Generating Viable Tissue-Engineered Constructs Cynthia M. Smith, Alice L. Stone, Robert L. Parkhill et al. · Tissue Engineering | Sep 2004 | 361 |
| 3 | Femtosecond versus nanosecond laser machining: comparison of induced stresses and structural changes in silicon wafers M.S. Amer, M. El-Ashry, Larry R. Dosser et al. · Applied Surface Science | 13 Oct 2004 | 160 |
| 4 | Characterizing Environmental Factors that Impact the Viability of Tissue-Engineered Constructs Fabricated by a Direct-Write Bioassembly Tool Cynthia M. Smith, Joseph J. Christian, William L. Warren et al. · Tissue Engineering | Feb 2007 | 117 |
| 5 | Three-dimensional tissue constructs built by bioprinting Károly Jakab, Brook J. Damon, Adrian Neagu et al. · Biorheology | May 2006 | 115 |
| 6 | A 2.45 GHz Phased Array Antenna Unit Cell Fabricated Using 3-D Multi-Layer Direct Digital Manufacturing Thomas P. Ketterl, Yaniel Vega, N. Arnal et al. · IEEE Transactions on Microwave Theory and Techniques | 11 Nov 2015 | 108 |
| 7 | Genetically engineered multiband fractal antennas Douglas H. Werner, P.L. Werner, Kenneth Church · Electronics Letters | 13 Sep 2001 | 81 |
| 8 | Fabrication and Microwave Characterization of 3-D Printed Transmission Lines Paul I. Deffenbaugh, Thomas M. Weller, Kenneth Church · IEEE Microwave and Wireless Components Letters | Dec 2015 | 79 |
| 9 | Bone marrow-derived osteoclast-like cells from a patient with craniometaphyseal dysplasia lack expression of osteoclast-reactive vacuolar proton pump. Tao Yamamoto, Noriyoshi Kurihara, Yuichi Yamaoka et al. · Journal of Clinical Investigation | 1993 | 51 |
| 10 | Multimaterial and Multilayer Direct Digital Manufacturing of 3-D Structural Microwave Electronics Kenneth Church, Nathan Crane, Paul I. Deffenbaugh et al. · Proceedings of the IEEE | 13 Feb 2017 | 45 |
| 11 | Characterization and Modeling of K-Band Coplanar Waveguides Digitally Manufactured Using Pulsed Picosecond Laser Machining of Thick-Film Conductive Paste Eduardo A. Rojas-Nastrucci, Harvey H. Tsang, Paul I. Deffenbaugh et al. · IEEE Transactions on Microwave Theory and Techniques | 22 Mar 2017 | 42 |
| 12 | Investigation of Layer Thickness and Surface Roughness in Rapid Freeze Prototyping Guanghua Sui, Ming C. Leu · Journal of Manufacturing Science and Engineering | 23 Jul 2003 | 42 |
| 13 | 3D multi-layer additive manufacturing of a 2.45 GHz RF front end N. Arnal, Thomas P. Ketterl, Yaniel Vega et al. | May 2015 | 37 |
| 14 | Genetically engineered multiband high‐impedance frequency selective surfaces Douglas J. Kern, Douglas H. Werner, Michael J. Wilhelm et al. · Microwave and Optical Technology Letters | 7 Jul 2003 | 31 |
| 15 | Active negative impedance loaded EBG structures for the realization of ultra-wideband Artificial Magnetic Conductors Douglas J. Kern, Douglas H. Werner, Michael J. Wilhelm | 22 Mar 2004 | 28 |
| 16 | ATUAÇÃO DO ENFERMEIRO COMO MEDIDA ESTRATÉGICA PARA AUMENTAR A ADESÃO AOS MÉTODOS NÃO FARMACOLÓGICOS PARA ALÍVIO DA DOR NO TRABALHO DE PARTO EM SALAS DE PRÉ-PARTO, PARTO E PUERPÉRIO (PPP) / NURSES´ PERFORMANCE AS A STRATEGIC MEASURE TO INCREASES ADHERENCE TO NON-PHARMACOLOGICAL METHODS FOR PAIN RELIEF IN CHILDBIRTH LABOR IN PREPARTUM, CHILDBIRTH AND PUERPERIUM ROOMS (PPP) Jéssica Nayara Therozene Bernado, Éder Júlio Rocha de Almeida, Maria Ilka Soares da Silva · Brazilian Journal of Development | 2020 | 27 |
| 17 | Femtosecond study of surface structure and composition and time-resolved spectroscopy in metals Kun Dou, Edward T. Knobbe, Robert L. Parkhill et al. · Applied Physics A | Mar 2003 | 23 |
| 18 | Thermal Analysis of Ice Walls Built by Rapid Freeze Prototyping Guanghua Sui, Ming C. Leu · Journal of Manufacturing Science and Engineering | Nov 2003 | 21 |
| 19 | Corrosion protection with synergistic LBL/Ormosil nanostructured thin films Olga Kachurina, Edward T. Knobbe, Tammy L. Metroke et al. · International Journal of Nanotechnology | 2004 | 19 |
| 20 | Embedded 6-GHz 3-D Printed Half-Wave Dipole Antenna Derar Hawatmeh, Sam LeBlanc, Paul I. Deffenbaugh et al. · IEEE Antennas and Wireless Propagation Letters | 3 May 2016 | 17 |
| 21 | Low-grazing-angle scattering from 3-D breaking water wave crests Yanzhong Li, James C. West · IEEE Transactions on Geoscience and Remote Sensing | 26 Jul 2006 | 17 |
| 22 | Red light emission from hybrid organic/inorganic quantum dot AC light emitting displays Richard M. Taylor, Kenneth Church, M.I. Sluch · Displays | Apr 2007 | 17 |
| 23 | Non‐coherent light for photodynamic therapy of superficial tumours in animals Kimberly Reeds, Tisha D. Ridgway, Russell G. Higbee et al. · Veterinary and Comparative Oncology | Sep 2004 | 16 |
| 24 | A novel design technique for ultra-thin tunable EBG AMC surfaces Douglas J. Kern, Michael J. Wilhelm, Douglas H. Werner et al. | 2004 | 15 |
| 25 | Phased Array Antenna Element with Embedded Cavity and MMIC using Direct Digital Manufacturing Merve Kacar, Jing Wang, Gökhan Mumcu et al. | Jul 2019 | 14 |
| 26 | Models of granulocyte DNA structure are highly predictive of myelodysplastic syndrome Donald C. Malins, Katie M. Anderson, Nayak Lincoln Polissar et al. · Proceedings of the National Academy of Sciences | 29 Mar 2004 | 13 |
| 27 | A high efficiency, electrically-small, 3-D machined-substrate antenna fabricated with fused deposition modeling and 3-D printing Ibrahim T. Nassar, Harvey H. Tsang, Kenneth Church et al. | 2014 | 11 |
| 28 | Direct-Write Construction of Tissue-Engineered Scaffolds Anatoly M. Kachurin, Robert L. Stewart, Kenneth Church et al. · MRS Proceedings | 2001 | 10 |
| 29 | Wideband Ku-band antennas using multi-layer direct digital manufacturing Merve Kacar, Casey Perkowski, Paul I. Deffenbaugh et al. | Jul 2017 | 9 |
| 30 | A Low-Profile Broadband Strip-Line Balun Sergio E. Melais, Thomas M. Weller, Michael J. Wilhelm | 13 Dec 2005 | 7 |
| 31 | Novel design techniques for miniature circularly-polarized antennas using genetic algorithms P.L. Werner, Michael J. Wilhelm, R.T. Salisbury et al. | 2 Mar 2004 | 7 |
| 32 | An Additively Manufactured CPW-back-fed Wideband Circularly-Polarized Radix Metasurface Patch Antenna for X-Band Space Applications John O’Keefe, Bake Roberts, Bryce Gray et al. | 6 Sep 2023 | 6 |
| 33 | 470 Celsius Packaging System for Silicon Carbide Electronics N. Chiolino, Anthony Matthew Francis, James Andrew Holmes et al. · Additional Conferences (Device Packaging HiTEC HiTEN & CICMT) | Apr 2021 | 5 |
| 34 | Digital Manufacturing and Performance Testing for Military Grade Application Specific Electronic Packaging (ASEP) Cortney Newton, Paul I. Deffenbaugh, Kenneth Church et al. · IMAPSource Proceedings | Oct 2016 | 4 |
| 35 | Digital Manufacturing for Electrically Functional Satlet Structures Paul I. Deffenbaugh, Mike Newton, Kenneth Church · IMAPSource Proceedings | Oct 2015 | 4 |
| 36 | In situ chlorine detection by ultraviolet absorption spectroscopy Constance S. Cassidy, Lowell R. Matthews, Kenneth Church et al. | Oct 2003 | 4 |
| 37 | Mechanical and temperature resilience of multi-material systems for printed electronics packaging Clayton Neff, Justin T. Nussbaum, Chris Gardiner et al. · Flexible and Printed Electronics | 6 Aug 2019 | 3 |
| 38 | Direct-Write Processes as Enabling Tools for Novel Antenna Development Bryan S. Irwin, Robert M. Taylor, Michael J. Wilhelm et al. · MRS Proceedings | 2001 | 3 |
| 39 | Hollow waveguide delivery of ultrashort pulses for tissue ablation Michael N. Nguyen, Bryan S. Irwin, Russell G. Higbee et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 10 Jun 2004 | 3 |
| 40 | Advanced Manufacturing and Characterization of mm-Wave Two-Layer Reflectarray Cells Sam LeBlanc, Kenneth Church, Eduardo A. Rojas-Nastrucci et al. | 27 Apr 2022 | 2 |
| 41 | Rapid prototyping of electronics via direct writing and laser processing Robert M. Taylor, Kenneth Church, Robert L. Parkhill et al. | Oct 2001 | 2 |
| 42 | Increasing the Reliability of 3D Printing a Wi-Fi Sensor Device Paul I. Deffenbaugh, Danielle Marie Stramel, Kenneth Church · IMAPSource Proceedings | Oct 2016 | 2 |
| 43 | Femtosecond laser ablation of porcine intestinal mucosa: potential autologous transplant for segmental cystectomy Russell G. Higbee, Bryan S. Irwin, Michael N. Nguyen et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 25 Apr 2005 | 2 |
| 44 | Additive Manufactured Electronics for Next Generation Microelectronics Sam LeBlanc, Lance Sookdeo, Bryce Gray et al. · SMTA International | Oct 2024 | 1 |
| 45 | Design, Fabrication, and Measurement of a Hemispherical Multi-Layer Band-Pass Frequency Selective Surface Ali Tehranian, Jordan Budhu, Casey Perkowski et al. · IEEE Transactions on Antennas and Propagation | 2026 | 1 |
| 46 | Direct Digital Manufacturing for Laser-Drilled Vias in Multilayer Glass Printed Circuit Structures Bryce Gray, Jason Benoit, Sam LeBlanc et al. | 27 May 2025 | 1 |
| 47 | ATENÇÃO OBSTÉTRICA: COMO GARANTIR QUALIDADE E SEGURANÇA DAS PACIENTES Pollianna Marys de Souza e Silva, Cinthia Karine do Nascimento, Luziele dos Santos Oliveira et al. · Revista Ibero-Americana de Humanidades, Ciências e Educação | 7 Aug 2024 | 1 |
| 48 | Direct Digital Manufacturing (DDM) Workflow for Printed Circuit Structures (PCS) Cortney Newton, Anand V. Kulkarni, J Benoît et al. · IMAPSource Proceedings | 13 Dec 2023 | 1 |
| 49 | Photonic Curing of mm-Wave Coplanar Waveguides for Conductor Loss Enhancement Sam LeBlanc, Kenneth Church, Eduardo A. Rojas-Nastrucci | 28 Apr 2021 | 1 |
| 50 | 4 GHz 3D-printed balun-fed bowtie antenna with finite ground plane for gain and impedance matching enhancement Patrick B. Nesbitt, Harvey H. Tsang, Thomas P. Ketterl et al. | Apr 2016 | 1 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.