Science Explorer Interactive view Map
Company · Finspång · Sweden

Siemens (Sweden)

In research, Siemens (Sweden) stands highest in Physical Sciences (#8,120 of 21,541 worldwide) and Engineering (#5,497 of 11,412 worldwide), over all time. Relative to its size it is most specialised in Engineering — Engineering is 5.0× its share of world research.

new.siemens.com/se/sv.htmlROR OpenAlex
World rank, all time
#14,475
of 42,892
Rank in Sweden
#111
of 286
Research works
276
▼ 33% vs 2013–17
Citations
5.5k
19.8 per fractional work
Top-10% rate
25.0%
record average 16.5%
Open access
28%
world 28%

What is Siemens (Sweden) known for in research?

The fields where it stands highest, over all time, ranked among every institution above the floor in each field.

FieldWorld rankWhere that sitsTop-10% rateWorks
Physical SciencesDomain #8,120 of 21,541 27.5%237
EngineeringField #5,497 of 11,412 27.7%180

Each strip is that field’s whole ranked pool, with the notch where Siemens (Sweden) sits in it, in the colour of the band that rank falls in. The track under the rate is the rate itself: it carries no world mark, because the world rate differs by field (from about 6% to 21% in this record).

What does Siemens (Sweden) specialise in?

Where its research is concentrated relative to its size: Engineering takes 5.0× the share of its output that it takes of world research.

  1. EngineeringField · 30.2 works5.0×
← less than its size predicts1×more →

Location quotient, a volume reading rather than an impact one. It surfaces small, lopsided specialities.

Field profile

Location quotient across every field it publishes in: outside the ring is more than an institution of this size would be expected to publish, inside it is less.

Neuroscience: 0.13× its world share, 0 worksNeuroscienceChemical Engineering: 13.20× its world share, 2 worksChemical EngineeringComputer Science: 0.39× its world share, 1 worksComputer ScienceEarth and Planetary Sciences: 0.18× its world share, 0 worksEarth and Planetary …Energy: 0.90× its world share, 0 worksEnergyEngineering: 5.01× its world share, 30 worksEngineeringEnvironmental Science: 0.52× its world share, 1 worksEnvironmental ScienceMaterials Science: 1.23× its world share, 2 worksMaterials ScienceMathematics: 0.28× its world share, 0 worksMathematicsPhysics and Astronomy: 0.12× its world share, 0 worksPhysics and AstronomyDentistry: 0.43× its world share, 0 worksDentistryHealth Professions: 0.18× its world share, 0 worksHealth ProfessionsMedicine: 0.26× its world share, 2 worksMedicineBusiness, Management and Accounting: 0.36× its world share, 0 worksBusiness, Management…Decision Sciences: 0.29× its world share, 0 worksDecision SciencesSocial Sciences: 0.11× its world share, 1 worksSocial Sciences1×world share
more than its size predictsabout as predictedless

Rings at 0.5×, 1× and 2×. Widest outward: Chemical Engineering, 13.2×. Every wedge is a field page.

Who are the top researchers at Siemens (Sweden)?

Ranked on the composite score, Xin-Hai Li lead among researchers whose main affiliation is Siemens (Sweden).

  1. 1 Xin-Hai Li Sweden · #1,059,536 worldwide 92 citations · 27 works
All ranked researchers at Siemens (Sweden)

Which keywords describe research at Siemens (Sweden)?

By fractional works in 2022–2025, weighted toward what it does more of than the world: Microstructure, Heat Transfer, Mechanical Properties, Additive Manufacturing, Large-Eddy Simulation, Chemical Kinetics, Phase Stability and Metallic Components.

▲ more of its work than of the world’s◆ about the world’s share▼ less than the world’s

Size is fractional works in 2022–2025 in the topics tagged with each word; colour is the word's share of this institution's work against its share of the world's. The 36 words are chosen for being large and distinctive. Each links to the topic it comes from most.

All 36 words, with their numbers
  1. Microstructure9▲ 42×7 topics
  2. Heat Transfer8▲ 38×10 topics
  3. Mechanical Properties7▲ 17×10 topics
  4. Additive Manufacturing6▲ 46×4 topics
  5. Large-Eddy Simulation6▲ 72×4 topics
  6. Chemical Kinetics4▲ 127×2 topics
  7. Phase Stability4▲ 160×2 topics
  8. Metallic Components4▲ 130×1 topic
  9. Selective Laser Melting4▲ 130×1 topic
  10. Combustion Instabilities3▲ 109×1 topic
  11. Turbulent Flames3▲ 171×1 topic
  12. High-Temperature Alloys3▲ 341×1 topic
  13. Superalloys3▲ 341×1 topic
  14. Boundary Layer2▲ 41×2 topics
  15. Sustainability2▲ 2.2×5 topics
  16. Combustion2▲ 74×1 topic
  17. Emissions2▲ 23×2 topics
  18. Gas Turbine Engines2▲ 91×2 topics
  19. Soot Formation2▲ 102×1 topic
  20. High-Entropy Alloys2▲ 90×1 topic
  21. Multi-Component Alloys2▲ 90×1 topic
  22. Thermal Conductivity2▲ 28×3 topics
  23. Film Cooling2▲ 263×1 topic
  24. Materials2▲ 17×2 topics
  25. Microstructural Evolution2▲ 27×3 topics
  26. Turbine2▲ 263×1 topic
  27. Numerical Simulation2▲ 13×5 topics
  28. 3D Printing1▲ 15×1 topic
  29. Applications1▲ 13×1 topic
  30. Oxidation Behavior1▲ 54×2 topics
  31. Cold Spray Deposition1▲ 77×1 topic
  32. Finite Element Method1▲ 30×3 topics
  33. Thermal Barrier Coatings1▲ 77×1 topic
  34. Environmental Impact1▲ 1.50×6 topics
  35. Numerical Modeling1▲ 24×2 topics
  36. Vortex Dynamics1▲ 22×2 topics

Which research topics does Siemens (Sweden) publish most on?

By volume in 2022–2025: Additive Manufacturing Materials and Processes, Combustion and flame dynamics, High Temperature Alloys and Creep and Advanced Combustion Engine Technologies.

Additive Manufacturing Materials and Processes: 4 fractional worksCombustion and flame dynamics: 3 fractional worksHigh Temperature Alloys …3High Temperature Alloys and Creep: 3 fractional worksAdvanced Combustion Engi…2Advanced Combustion Engine Technologies: 2 fractional worksHigh Entropy Alloys Studies: 2 fractional worksTurbomachinery Performance and Optimization: 2 fractional worksAdditive Manufacturing a…1Additive Manufacturing and 3D Printing Technologies: 1 fractional worksHigh-Temperature Coating Behaviors: 1 fractional worksHeat Transfer Mechanisms: 1 fractional worksFluid Dynamics and Turbulent Flows: 1 fractional works
Mechanical EngineeringComputational MechanicsFluid Flow and Transfer ProcessesAerospace Engineering1 others

Area is fractional works; colour is the subfield each topic belongs to.

  1. 1 Additive Manufacturing Materials and Processes Mechanical Engineering 4 works
  2. 2 Combustion and flame dynamics Computational Mechanics 3 works
  3. 3 High Temperature Alloys and Creep Mechanical Engineering 3 works
  4. 4 Advanced Combustion Engine Technologies Fluid Flow and Transfer Processes 2 works
  5. 5 High Entropy Alloys Studies Mechanical Engineering 2 works
  6. 6 Turbomachinery Performance and Optimization Aerospace Engineering 2 works
  7. 7 Additive Manufacturing and 3D Printing Technologies Automotive Engineering 1 works
  8. 8 High-Temperature Coating Behaviors Aerospace Engineering 1 works
  9. 9 Heat Transfer Mechanisms Mechanical Engineering 1 works
  10. 10 Fluid Dynamics and Turbulent Flows Computational Mechanics 1 works

How open and international is its research?

Against the world’s own shares — the tick on each track. Both are shares of its output, so they sit on one scale and can be read against each other as well as against the world.

openly available28.5%not open71.5%

World: 28% of research is openly available.

with international co-authors27.0%domestic only73.0%

World: 19% is written across borders.

How has Siemens (Sweden)'s research output changed?

Output in 2018–2022 was 33% lower than in 2013–2017.

1990200020102020
grewheldshrank

The same series as a ribbon — one cell per year, darker for more. The line above answers how much; this answers when.

Other research institutions in Finspång

All research institutions in Finspång

Research measures only: rankings here say nothing about teaching, admissions or student experience. Comparable institutions and collaboration partners are in the interactive view on the map.