Science Explorer Back to mapMap
Discussion
Institution · Sirris

Most cited papers from Sirris

Sirris

What are the most cited papers from Sirris?

The most cited paper from Sirris is "EULAR recommendations for cardiovascular disease risk management in patients with rheumatoid arthritis and other forms of inflammatory joint disorders: 2015/2016 update" (Rabia Agca et al., 2016), with 1,386 citations. Next come "Electron beam melted Ti–6Al–4V: Microstructure, texture and mechanical behavior of the as-built and heat-treated material" (372) and "Recommended Guidelines for Uniform Reporting of Data From Drowning" (319).

Showing 50 of 60 papers. Every paper with more than 30 citations is listed.

Most cited papers, sortable by citations and release date
#Paper
1 EULAR recommendations for cardiovascular disease risk management in patients with rheumatoid arthritis and other forms of inflammatory joint disorders: 2015/2016 update Rabia Agca et al. · Annals of the Rheumatic Diseases Open access 3 Oct 2016 1,386
2 Electron beam melted Ti–6Al–4V: Microstructure, texture and mechanical behavior of the as-built and heat-treated material Charlotte de Formanoir, Sébastien Michotte, Olivier Rigo et al. · Materials Science and Engineering A Open access Dec 2015 372
3 Recommended Guidelines for Uniform Reporting of Data From Drowning Writing Group: et al. · Circulation Open access 17 Nov 2003 319
4 Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting Jocelyn Delahaye, Jérôme Tchoufack Tchuindjang, Jacqueline Lecomte‐Beckers et al. · Acta Materialia 11 Jun 2019 265
5 Laser cladding as repair technology for Ti–6Al–4V alloy: Influence of building strategy on microstructure and hardness Hakan Paydas, Anne Mertens, Raoul Carrus et al. · Materials & Design 12 Jul 2015 195
6 Mechanical properties of alloy Ti–6Al–4V and of stainless steel 316L processed by selective laser melting: influence of out-of-equilibrium microstructures Anne Mertens, Sylvie Reginster, Hakan Paydas et al. · Powder Metallurgy 15 Apr 2014 184
7 Optical measurement techniques for mobile and large-scale dimensional metrology Wim Cuypers, Nick Van Gestel, André Voet et al. · Optics and Lasers in Engineering Open access 6 May 2008 180
8 Rheology and properties of melt-processed poly(ether ether ketone)/multi-wall carbon nanotube composites D. S. Bangarusampath, Holger Ruckdäschel, Volker Altstädt et al. · Polymer 27 Sep 2009 159
9 A strategy to improve the work-hardening behavior of Ti–6Al–4V parts produced by additive manufacturing Charlotte de Formanoir, Alice Brulard, Solange Vivès et al. · Materials Research Letters Open access 24 Oct 2016 149
10 A Bayesian machine scientist to aid in the solution of challenging scientific problems Roger Guimerà, I. Reichardt, Antoni Aguilar‐Mogas et al. · Science Advances Open access 31 Jan 2020 138
11 Effect of strut orientation on the microstructure heterogeneities in AlSi10Mg lattices processed by selective laser melting Pauline Delroisse, Pascal Jacques, Éric Maire et al. · Scripta Materialia Open access 24 Jul 2017 129
12 Optimization of Energy Consumption and Surface Quality in Finish Turning Yansong Guo, Jef Loenders, Joost R. Duflou et al. · Procedia CIRP Open access 2012 124
13 Assessment of muscle fatigue in low level monotonous task performance during car driving Ivo Hostens, Herman Ramón · Journal of Electromyography and Kinesiology 15 Dec 2004 122
14 Density and porosity control of sintered 316L stainless steel parts produced by additive manufacturing Bruno Verlée, Thierry Dormal, Jacqueline Lecomte‐Beckers · Powder Metallurgy Sep 2012 115
15 Opportunities for bacterial nanocellulose in biomedical applications: Review on biosynthesis, modification and challenges Pieter Samyn, Amin Meftahi, Sahar Abbasi Geravand et al. · International Journal of Biological Macromolecules Open access 20 Jan 2023 111
16 Cascade position control of a single pneumatic artificial muscle–mass system with hysteresis compensation Tri Vo Minh, Tegoeh Tjahjowidodo, Herman Ramón et al. · Mechatronics 26 Mar 2010 110
17 In Situ Monitoring Systems of The SLM Process: On the Need to Develop Machine Learning Models for Data Processing Pinku Yadav, Olivier Rigo, Corinne Arvieu et al. · Crystals Open access 18 Jun 2020 102
18 How Do We Determine the Efficacy of an Antibacterial Surface? A Review of Standardised Antibacterial Material Testing Methods Alexander J. Cunliffe, Peter D. Askew, Ina Stephan et al. · Antibiotics Open access 3 Sep 2021 101
19 Human–Robot Interaction: Kinematics and Muscle Activity Inside a Powered Compliant Knee Exoskeleton Kristel Knaepen, Pieter Beyl, Saartje Duerinck et al. · IEEE Transactions on Neural Systems and Rehabilitation Engineering 16 May 2014 100
20 Toward a wire medium endoscope for MRI imaging Xavier Radu, Didier Garray, Christophe Craeye · Metamaterials 4 Aug 2009 98
21 Decrease of a specific biomarker of collagen degradation in osteoarthritis, Coll2-1, by treatment with highly bioavailable curcumin during an exploratory clinical trial Yves Edgard Henrotin, Myriam Gharbi, Yvan Dierckxsens et al. · BMC Complementary and Alternative Medicine Open access 17 May 2014 94
22 Microstructures and Mechanical Properties of Stainless Steel AISI 316L Processed by Selective Laser Melting Anne Mertens, Sylvie Reginster, Quentin Contrepois et al. · Materials science forum Open access 23 May 2014 94
23 Damping estimation of an offshore wind turbine on a monopile foundation Christof Devriendt, Pieter Jan Jordaens, Gert De Sitter et al. · IET Renewable Power Generation Open access 24 Jun 2013 93
24 Nanocelluloses as sustainable membrane materials for separation and filtration technologies: Principles, opportunities, and challenges Ahmed Barhoum, Kalim Deshmukh, Maria-Luisa García-Betancourt et al. · Carbohydrate Polymers Open access 29 May 2023 90
25 Oxidative wear behaviour of laser clad High Speed Steel thick deposits: Influence of sliding speed, carbide type and morphology Neda Hashemi, Anne Mertens, Henri-Michel Montrieux et al. · Surface and Coatings Technology 28 Feb 2017 87
26 3D thermal finite element analysis of laser cladding processed Ti-6Al-4V part with microstructural correlations Hoang-Son Tran, Jérôme Tchoufack Tchuindjang, Hakan Paydas et al. · Materials & Design 29 Apr 2017 84
27 Physicochemical and thermal characterization of poly (3-hydroxybutyrate-co-4-hydroxybutyrate) films incorporating thyme essential oil for active packaging of white bread Palak Sharma, Arihant Ahuja, Ansari Mohammed Dilsad Izrayeel et al. · Food Control 15 Nov 2021 83
28 Cutting applications of DLC, hard carbon and diamond films Thierry Vandevelde, K. Vandierendonck, M. Van Stappen et al. · Surface and Coatings Technology Mar 1999 83
29 A collaborative process planning and scheduling system Jan Kempenaers, Jos Pinte, Jan Detand et al. · Advances in Engineering Software 1996 80
30 A test object with parallel grooves for calibration and accuracy assessment of industrial computed tomography (CT) metrology Kim Kiekens, Frank Welkenhuyzen, Yunhua Tan et al. · Measurement Science and Technology Open access 19 Sep 2011 79
31 Application of wireless sensor networks in critical infrastructure protection: challenges and design options [Security and Privacy in Emerging Wireless Networks Levente Buttyán, Dennis Gessner, Alban Hessler et al. · IEEE Wireless Communications Oct 2010 78
32 Prediction of peptide structure: How far are we? A. G. Thomas, Sébastien Deshayes, Marc Decaffmeyer et al. · Proteins Structure Function and Bioinformatics 3 Oct 2006 74
33 3D‐Printed Synthetic Hydroxyapatite Scaffold With In Silico Optimized Macrostructure Enhances Bone Formation In Vivo Dorien Van Hede, Bingbing Liang, Sandy Anania et al. · Advanced Functional Materials Open access 29 Oct 2021 70
34 Role of Porins in the Susceptibility of Mycobacterium smegmatis and Mycobacterium chelonae to Aldehyde-Based Disinfectants and Drugs Zuzana Svetlíková, Henrieta Škovierová, Michael Niederweis et al. · Antimicrobial Agents and Chemotherapy Open access 6 Jul 2009 70
35 In vitro and in vivo biocompatibility of calcium‐phosphate scaffolds three‐dimensional printed by stereolithography for bone regeneration Laurent Le Guéhennec, Dorien Van Hede, Erwan Plougonven et al. · Journal of Biomedical Materials Research Part A 26 Oct 2019 67
36 Realizing property-based attestation and sealing with commonly available hard- and software Ulrich Kühn, Marcel Selhorst, Christian Stüble Conference paper 2 Nov 2007 67
37 A novel method for producing solid polymer microneedles using laser ablated moulds in an injection moulding process Tim Evens, Olivier Malek, Sylvie Castagne et al. · Manufacturing Letters Open access 9 Mar 2020 60
38 Critical assessment of the impact of process parameters on vertical roughness and hardness of thin walls of AlSi10Mg processed by laser powder bed fusion Olivier Poncelet, Matthieu Marteleur, Camille van der Rest et al. · Additive manufacturing Open access 30 Dec 2020 57
39 Inducing probabilistic relational rules from probabilistic examples Luc De Raedt, Anton Dries, Ingo Thon et al. · Lirias Conference paperOpen access 25 Jul 2015 57
40 The effect of particle-stimulated nucleation on texture banding in an aluminium alloy Tricia A. Bennett, Roumen Petrov, Leo A. I. Kestens et al. · Scripta Materialia 23 Apr 2010 50
41 Development of low friction wear-resistant coatings Patrick Cosemans, Xiaodong Zhu, Jean‐Pierre Célis et al. · Surface and Coatings Technology 30 Jun 2003 50
42 Inline Drift Detection Using Monitoring Systems and Machine Learning in Selective Laser Melting Pinku Yadav, Vibhutesh Kumar Singh, Thomas Joffre et al. · Advanced Engineering Materials Open access 31 Jul 2020 49
43 Towards a community-based, social network-driven framework for Web services management Hamdi Yahyaoui, Zakaria Maamar, Erbin Lim et al. · Future Generation Computer Systems 26 Feb 2013 39
44 Hybrid processes — a versatile technique to match process requirements and coating needs Jean‐Pierre Célis, Dirk Drees, M.Z. Huq et al. · Surface and Coatings Technology Mar 1999 39
45 Sensitivity Analysis in the Modelling of a High Speed Steel Thin-Wall Produced by Directed Energy Deposition Ruben Jardin, Víctor Tuninetti, Jérôme Tchoufack Tchuindjang et al. · Metals Open access 22 Nov 2020 38
46 Evaluation of Aerosol Jet Printing (AJP) technology for electronic packaging and interconnect technique Serguei Stoukatch, Philippe Laurent, Samuel Dricot et al. · 2012 4th Electronic System-Integration Technology Conference Conference paperOpen access Sep 2012 37
47 Identification of material parameters to predict Single Point Incremental Forming forces Christian Bouffioux, Philip Eyckens, Christophe Henrard et al. · International Journal of Material Forming 29 Mar 2008 37
48 Secure object identification Ammar Alkassar, Christian Stüble, Ahmad‐Reza Sadeghi Conference paper 13 Aug 2003 36
49 Fast Production of Gear Prototypes – A Comparison of Technologies Jan Bouquet, Lars Hensgen, A. Klink et al. · Procedia CIRP Open access 2014 36
50 ZnO-Based Sunscreen: The Perfect Example To Introduce Nanoparticles in an Undergraduate or High School Chemistry Lab Wanda Guedens, Monique Reynders, H. Van den Rul et al. · Journal of Chemical Education 10 Oct 2013 36

Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.