Science Explorer Back to mapMap
Discussion
Institution · State Key Laboratory of Compressor Technology

Most cited papers from State Key Laboratory of Compressor Technology

State Key Laboratory of Compressor Technology

What are the most cited papers from State Key Laboratory of Compressor Technology?

The most cited paper from State Key Laboratory of Compressor Technology is "An improved fault detection method for incipient centrifugal chiller faults using the PCA-R-SVDD algorithm" (Guannan Li, Yunpeng Hu, Huanxin Chen et al., 2015), with 131 citations. Next come "Furfural-based P/N/S flame retardant towards high-performance epoxy resins with flame retardancy, toughness, low dielectric properties and UV resistance" (127) and "Data partitioning and association mining for identifying VRF energy consumption patterns under various part loads and refrigerant charge conditions" (100).

Showing 50 of 60 papers. Every paper with more than 14 citations is listed.

Most cited papers, sortable by citations and release date
#Paper
1 An improved fault detection method for incipient centrifugal chiller faults using the PCA-R-SVDD algorithm Guannan Li, Yunpeng Hu, Huanxin Chen et al. · Energy and Buildings 29 Dec 2015 131
2 Furfural-based P/N/S flame retardant towards high-performance epoxy resins with flame retardancy, toughness, low dielectric properties and UV resistance Yadong Wang, Li Ma, Jun Wen Yuan et al. · Polymer Degradation and Stability 21 Mar 2023 127
3 Data partitioning and association mining for identifying VRF energy consumption patterns under various part loads and refrigerant charge conditions Guannan Li, Yunpeng Hu, Huanxin Chen et al. · Applied Energy 11 Nov 2016 100
4 A novel efficient SVM-based fault diagnosis method for multi-split air conditioning system’s refrigerant charge fault amount Kaizheng Sun, Guannan Li, Huanxin Chen et al. · Applied Thermal Engineering 18 Jul 2016 98
5 An improved decision tree-based fault diagnosis method for practical variable refrigerant flow system using virtual sensor-based fault indicators Guannan Li, Huanxin Chen, Yunpeng Hu et al. · Applied Thermal Engineering 10 Oct 2017 92
6 A statistical training data cleaning strategy for the PCA-based chiller sensor fault detection, diagnosis and data reconstruction method Yunpeng Hu, Huanxin Chen, Guannan Li et al. · Energy and Buildings 2 Dec 2015 91
7 Performance investigation of a multi‐nozzle ejector for proton exchange membrane fuel cell system Jiquan Han, Jianmei Feng, Tianfang Hou et al. · International Journal of Energy Research Open access 7 Oct 2020 76
8 Performance prediction and evaluation of the scroll-type hydrogen pump for FCVs based on CFD–Taguchi method Qingqing Zhang, Jianmei Feng, Quanquan Zhang et al. · International Journal of Hydrogen Energy 30 Apr 2019 64
9 Transient flow field and performance analysis of a claw pump for FCVs Pengtai Gu, Linfen Xing, Yuefei Wang et al. · International Journal of Hydrogen Energy 18 Oct 2020 63
10 Machine learning neural-network identification for dynamic recrystallization grains during hot deformation of nickel-based superalloy Yulong Zhu, Yu Cao, Qubo He et al. · Materials Characterization 9 Jul 2022 58
11 Analysis of the three-dimensional transient flow in a scroll refrigeration compressor Shuaihui Sun, Kai Wu, Pengcheng Guo et al. · Applied Thermal Engineering 23 Aug 2017 58
12 Interrupted plate porous media design for ionic liquid-type liquid piston hydrogen compressor and analysis of the effect on compression efficiency Hao Zhou, Peng Dong, Shengdun Zhao et al. · Journal of Energy Storage 15 Mar 2022 55
13 Extending the virtual refrigerant charge sensor (VRC) for variable refrigerant flow (VRF) air conditioning system using data-based analysis methods Guannan Li, Yunpeng Hu, Huanxin Chen et al. · Applied Thermal Engineering 23 Oct 2015 53
14 Performance analysis of solar air cooled double effect LiBr/H2O absorption cooling system in subtropical city Zeyu Li, Xiangyang Ye, Jinping Liu · Energy Conversion and Management 18 Jun 2014 51
15 An improved non-contact dynamic stress measurement method for turbomachinery rotating blades based on fundamental mistuning model Weimin Wang, Dongfang Hu, Qihang Li et al. · Mechanical Systems and Signal Processing 16 Apr 2020 49
16 Data-driven fault diagnosis for residential variable refrigerant flow system on imbalanced data environments Zhenxin Zhou, Huanxin Chen, Guannan Li et al. · International Journal of Refrigeration 18 Jan 2021 48
17 A robust online refrigerant charge fault diagnosis strategy for VRF systems based on virtual sensor technique and PCA-EWMA method Jiangyan Liu, Guannan Li, Huanxin Chen et al. · Applied Thermal Engineering 18 Mar 2017 48
18 A machine learning bayesian network for refrigerant charge faults of variable refrigerant flow air conditioning system Min Hu, Huanxin Chen, Limei Shen et al. · Energy and Buildings 12 Oct 2017 47
19 Dynamic performance of suction valve in stepless capacity regulation system for large-scale reciprocating compressor Guangbin Liu, Yuanyang Zhao, Bin Tang et al. · Applied Thermal Engineering 25 Nov 2015 46
20 Identification and isolation of outdoor fouling faults using only built-in sensors in variable refrigerant flow system: A data mining approach Guannan Li, Yunpeng Hu, Huanxin Chen et al. · Energy and Buildings 18 Apr 2017 44
21 Sensitivity analysis for PCA-based chiller sensor fault detection Yunpeng Hu, Guannan Li, Huanxin Chen et al. · International Journal of Refrigeration 12 Dec 2015 44
22 Dynamics characteristics analysis of the oil-free scroll hydrogen recirculating pump based on multibody dynamics simulation Feng Jianmei, Zhang Qingqing, Tianfang Hou et al. · International Journal of Hydrogen Energy 3 Dec 2020 40
23 Simultaneously improved modulus, thermal expansion coefficient and wear resistance of a Mg–6Zn–1Gd–0.3Ca matrix composite by adding high volume fraction SiC particles Wei Li, Kai-bo Nie, Kun-kun Deng et al. · Journal of Materials Research and Technology Open access 18 Aug 2023 39
24 Experimental assessment of solar absorption-subcooled compression hybrid cooling system Jianting Yu, Zeyu Li, Erjian Chen et al. · Solar Energy 25 Apr 2019 39
25 Spray characteristics of diesel, biodiesel, polyoxymethylene dimethyl ethers blends and prediction of spray tip penetration using artificial neural network Yu Liu, Junjian Tian, Zhihui Song et al. · Physics of Fluids 2022 38
26 Performance analysis and parametric studies on the primary nozzle of ejectors in proton exchange membrane fuel cell systems Jianmei Feng, Jiquan Han, Tianfang Hou et al. · Energy Sources Part A Recovery Utilization and Environmental Effects 25 Aug 2020 38
27 A graph neural network-based data cleaning method to prevent intelligent fault diagnosis from data contamination Shuhui Wang, Yaguo Lei, Bin Yang et al. · Engineering Applications of Artificial Intelligence 4 Sep 2023 37
28 Development of a virtual variable-speed compressor power sensor for variable refrigerant flow air conditioning system Yabin Guo, Guannan Li, Huanxin Chen et al. · International Journal of Refrigeration 30 Sep 2016 37
29 Investigation on the modifications of the suction flow passage in a scroll refrigeration compressor Shuaihui Sun, Xianwen Wang, Pengcheng Guo et al. · Applied Thermal Engineering Feb 2020 36
30 Design and development of an oil-free double-scroll air compressor used in a PEM fuel cell system Jun Wang, Yi Han, Shiyang Pan et al. · Renewable Energy 7 Sep 2022 35
31 Experimental study on spray characteristics of octanol biodiesel and modification of spray tip penetration model Junjian Tian, Yu Liu, Fengyu Li et al. · Physics of Fluids Sep 2021 35
32 Liquid floodback detection for scroll compressor in a VRF system under heating mode Jiangyu Wang, Guannan Li, Huanxin Chen et al. · Applied Thermal Engineering 16 Dec 2016 35
33 Research on Effects of Vapor Injection on Twin-screw Compressor Performance Huagen Wu, Kanlong Lin, Hao Huang et al. · International Journal of Refrigeration 7 May 2020 32
34 Research on diagnostic strategy for faults in VRF air conditioning system using hybrid data mining methods Yuzhou Wang, Zhengfei Li, Huanxin Chen et al. · Energy and Buildings 31 May 2021 31
35 Effect of confining pressure on the compression-shear fracture properties of sandstone Jiuzhou Huang, Wen Hua, Dengsong Li et al. · Theoretical and Applied Fracture Mechanics 11 Jan 2023 27
36 Research on the characteristics of two-phase flow-induced noise in the cavitation dynamics of electronic expansion valves Junyu Wang, Yongxing Song, Jingting Liu et al. · Physics of Fluids 2024 25
37 Spray characteristics of biodiesel-polyoxymethylene dimethyl ethers (PODE) blends in a constant volume chamber Yu Liu, Junjian Tian, Fengyu Li et al. · Combustion Science and Technology 29 Mar 2022 25
38 Achieving high strength in graphene nanoplatelets reinforced Mg-Zn-Mn matrix composites via liquid-state molding technology and low temperature deformation process Yuhao Chen, Kai-bo Nie, Zhilong Liu et al. · Journal of Alloys and Compounds 21 Aug 2023 24
39 Research on power consumption distribution characteristics of a water-lubricated twin-screw air compressor for fuel cell applications Chuang Wang, Mingkun Liu, Bingqi Wang et al. · Energy 30 Jun 2022 24
40 Resistive switching behavior of the memristor based on WS2 nanosheets and polyvinylpyrrolidone nanocomposites Qing Cao, Limiao Xiong, Xudong Yuan et al. · Applied Physics Letters 6 Jun 2022 23
41 Experimental research of increased cooling output by dedicated subcooling Erjian Chen, Zeyu Li, Jianting Yu et al. · Applied Thermal Engineering 14 Mar 2019 23
42 Analysis and numerical simulation of claw vacuum pumps with novel three-claw rotors Shiyang Pan, Jun Wang, Qingpeng Tan et al. · Vacuum 10 Jul 2021 21
43 Revealing hot deformation behavior of inconel X-750 superalloy: A novel hot processing map coupled with grain boundary engineering Jieke Zhang, Yu Cao, Yuhao Gong et al. · Journal of Materials Research and Technology Open access Jun 2023 20
44 Evaluation of the smart daylighting control performance of the concentrating photovoltaic/daylighting system as the skylight in the building Qingdong Xuan, Guiqiang Li, Bin Zhao et al. · Solar Energy 13 Apr 2022 19
45 Clearance distribution design and thermal deformation analysis of variable-pitch screw rotors for twin-screw vacuum pumps Jun Wang, Xihao Zhao, Lizhuang Zhao et al. · Vacuum 27 Feb 2023 18
46 Effect of hot extrusion on the microstructure and mechanical properties of SiCNWs/Mg-2Zn-0.1Y composite Wei Li, Kai-bo Nie, Zhilong Liu et al. · Materials Characterization 14 May 2022 18
47 Transient performance of a nanowire-based near-field thermophotovoltaic system Kai Li, WU Shi-feng, Shaowen Cao et al. · Applied Thermal Engineering 13 Apr 2021 18
48 Upper-limit of performance improvement by using (quasi) two-stage vapor compression Xufei Yang, Baolong Wang, Zuo Cheng et al. · Applied Thermal Engineering 8 Dec 2020 18
49 Research on fault diagnosis strategy of air-conditioning system based on signal demodulation and BPNN-PCA Qizheng Ma, Caiping Yue, Ming Hui Yu et al. · International Journal of Refrigeration 7 Dec 2023 17
50 Strength-plasticity-matched (GNPs+GFs)/Mg–3Zn-0.1Ymagnesium matrix composites with high modulus through liquid-phase dispersion and multistep deformation Yongzhi Guo, Kai-bo Nie, Kun-kun Deng et al. · Composites Communications 22 Nov 2023 17

Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.