Institution · Stress Photonics (United States)
Most cited papers from Stress Photonics (United States)
What are the most cited papers from Stress Photonics (United States)?
The most cited paper from Stress Photonics (United States) is "Part deflection and residual stresses in laser powder bed fusion of H13 tool steel" (Morteza Narvan, Ali Ghasemi, Eskandar Fereiduni et al., 2021), with 87 citations. Next come "Infrared grey-field polariscope: A tool for rapid stress analysis in microelectronic materials and devices" (54) and "Directional Raman scattering spectra of metal–sulfur bonds at smooth gold and silver substrates" (45).
Showing 50 of 57 papers. Every paper is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Part deflection and residual stresses in laser powder bed fusion of H13 tool steel Morteza Narvan, Ali Ghasemi, Eskandar Fereiduni et al. · Materials & Design | 18 Mar 2021 | 87 |
| 2 | Infrared grey-field polariscope: A tool for rapid stress analysis in microelectronic materials and devices Gavin P. Horn, Jon R. Lesniak, Thomas J. Mackin et al. · Review of Scientific Instruments | 22 Mar 2005 | 54 |
| 3 | Directional Raman scattering spectra of metal–sulfur bonds at smooth gold and silver substrates Charles K. A. Nyamekye, Stephen C. Weibel, Emily A. Smith · Journal of Raman Spectroscopy | 6 May 2021 | 45 |
| 4 | Design and evaluation of the poleidoscope: A novel digital polariscope J. R. Lesniak, S. J. Zhang, Eann A. Patterson · Experimental Mechanics | Apr 2004 | 42 |
| 5 | A new method for predicting cracking at the interface between solid and lattice support during laser powder bed fusion additive manufacturing Hai T. Tran, Qian Chen, Jonathan Mohan et al. · Additive manufacturing | 10 Jan 2020 | 40 |
| 6 | Effects of surface stress on Barkhausen effect emissions: model predictions and comparison with X-ray diffraction studies David C. Jiles, Lasse Suominen · IEEE Transactions on Magnetics | 1994 | 34 |
| 7 | USE OF BARKHAUSEN NOISE IN FATIGUE K. Tiitto · Nondestructive Testing And Evaluation | Dec 1989 | 27 |
| 8 | Numerical simulation of stress intensity factors via the thermoelastic technique Shen‐Haw Ju, J. R. Lesniak, B. I. Sandor · Experimental Mechanics | Sep 1997 | 27 |
| 9 | 50% continuous-wave wallplug efficiency from 1.53μm-emitting broad-area diode lasers Toby J. Garrod, Donald B. Olson, M. Klaus et al. · Applied Physics Letters | 18 Aug 2014 | 25 |
| 10 | Stress Intensity Measurement via Infrared Focal Plane Array J. R. Lesniak, DJ Bazile, B. R. Boyce et al. | 1997 | 23 |
| 11 | Residual Stress Measurement by ESPI Hole-Drilling Theo J. Rickert · Procedia CIRP | 2016 | 22 |
| 12 | Stress analysis of a pinned wood joint by grey-field photoelasticity B.E. Foust, J. R. Lesniak, Robert E. Rowlands · Composites Part B Engineering | 2 Feb 2014 | 18 |
| 13 | MAGNETOELASTIC TESTING OF BIAXIAL STRESSES Seppo Tiitto · Experimental Techniques | Jul 1991 | 15 |
| 14 | Differential thermography applied to structural integrity assessment Jon R. Lesniak, Bradley R. Boyce · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 28 Mar 1995 | 15 |
| 15 | Thermoelastic Determination of Individual Stresses in Vicinity of a Near-Edge Hole Beneath a Concentrated Load Shiang‐Jiun Lin, Simon Quinn, Don R. Matthys et al. · Experimental Mechanics | 22 Jul 2010 | 14 |
| 16 | Non-destructive Case Depth Determination by Means of Low-Frequency Barkhausen Noise Measurements Sebastian Send, Dominik Dapprich, James J. Thomas et al. · Journal of Nondestructive Evaluation | 24 Oct 2018 | 13 |
| 17 | Forced-diffusion thermography technique and projector design Jon R. Lesniak, Daniel J. Bazile · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 15 Mar 1996 | 13 |
| 18 | Combined measurement of directional Raman scattering and surface-plasmon-polariton cone from adsorbates on smooth planar gold surfaces Charles K. A. Nyamekye, Stephen C. Weibel, Jonathan M. Bobbitt et al. · The Analyst | 15 Sep 2017 | 12 |
| 19 | Detection of Interfacial Gas Bubbles in Wafer Bonded Silicon with Different Surface Treatments Gavin P. Horn, Markus Gabriel, Jon R. Lesniak et al. · Journal of The Electrochemical Society | 25 Nov 2008 | 12 |
| 20 | Detection and Quantification of Surface Nanotopography-Induced Residual Stress Fields in Wafer-Bonded Silicon Gavin P. Horn, Yong S. Chu, Yuncheng Zhong et al. · Journal of The Electrochemical Society | 27 Nov 2007 | 12 |
| 21 | Experimental analysis of waveguide-coupled surface-plasmon-polariton cone properties Charles K. A. Nyamekye, Qiaochu Zhu, Russell Mahmood et al. · Analytica Chimica Acta | 26 Sep 2018 | 11 |
| 22 | Forced diffusion thermography Jon R. Lesniak, Bradley R. Boyce · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 3 Dec 1993 | 11 |
| 23 | Development of 3-D Digital Image Correlation Using a Single Color-Camera and Diffractive Speckle Projection Wade Gubbels, Gary S. Schajer · Experimental Mechanics | 24 May 2016 | 10 |
| 24 | Magnetoelastic Testing of Uniaxial and Biaxial Stresses Seppo Tiitto | 1989 | 10 |
| 25 | Visualization of contact stress distribution using infrared stress-measurement system Takahide SAKAGAMI, Keiji Ogura, Shiro KUBO et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 4 Apr 1997 | 8 |
| 26 | Solving Internal Stress Measurement Problems by a New Magnetoelastic Method K. Tiitto | 1984 | 8 |
| 27 | Thermoelastic Measurement Techniques Enabled by Self-reference Bradley R. Boyce, Jon R. Lesniak · Conference proceedings of the Society for Experimental Mechanics | 9 Oct 2018 | 7 |
| 28 | Design for high-power single-mode operation from 2-D surface-emitting ROW-DFB lasers Shuang Li, D. Botez · IEEE Photonics Technology Letters | 22 Feb 2005 | 7 |
| 29 | Determining Individual Stresses Throughout a Pinned Aluminum Joint by Reflective Photoelasticity B.E. Foust, J. R. Lesniak, Robert E. Rowlands · Experimental Mechanics | 18 Mar 2011 | 7 |
| 30 | Stresses at and in the neighborhood of a near-edge hole in a plate subjected to an offset load from measured temperatures Shiang‐Jiun Lin, Don R. Matthys, Simon Quinn et al. · European Journal of Mechanics - A/Solids | 3 Oct 2012 | 7 |
| 31 | Detection of Heat Treat Defects and Grinding Burns by Measurement of Barkhausen Noise K. Tiitto, R.J. Pro | 1987 | 6 |
| 32 | ESPI Hole-Drilling of Rings and Holes Using Cylindrical Hole Analysis Theo J. Rickert, Wade Gubbels · Conference proceedings of the Society for Experimental Mechanics | 19 Sep 2016 | 5 |
| 33 | AN ELEVATED-TEMPERATURE TSA FURNACE DESIGN J. R. Lesniak, B. Bartel · Experimental Techniques | Mar 1996 | 5 |
| 34 | Residual Stress Measurement of Ti-Metal Samples by Means of XRD with Ti and Cu Radiation Lasse Suominen, Theo J. Rickert, Sebastian Send · Materials research proceedings | 21 Dec 2016 | 4 |
| 35 | A NEW APPROACH FOR DETECTING DEFECTS IN BONDED MEMS DEVICES Gavin P. Horn, Thomas J. Mackin, J. R. Lesniak et al. · Experimental Techniques | Sep 2004 | 4 |
| 36 | Theory and application of coating tolerant thermography Jon R. Lesniak, Daniel J. Bazile, Michael J. Zickel · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 26 Mar 1998 | 4 |
| 37 | The use of thermoelastic stress analysis for stress distribution evaluation of an industrial equipment under regular operating conditions Robert Misiewicz, Przemysław Moczko, Bradley R. Boyce · Archives of Civil and Mechanical Engineering | Apr 2022 | 3 |
| 38 | Stress Measurement Repeatability in ESPI Hole-Drilling Theo J. Rickert · Conference proceedings of the Society for Experimental Mechanics | 29 Oct 2015 | 3 |
| 39 | Quantitative Model-Based Interpretation of Experimentally Measured Nanoscale Stress Sources at Wafer Bonded Interfaces Gavin P. Horn, Harley T. Johnson, Thomas J. Mackin et al. · ECS Transactions | 20 Oct 2006 | 3 |
| 40 | Coating tolerant thermography for the detection of cracks in structures Jon R. Lesniak, Daniel J. Bazile, Michael J. Zickel · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 4 Apr 1997 | 3 |
| 41 | 5.2dB Sensitivity Enhancement in 25Gbps APD-Based Optical Receiver Using Dynamic Biasing Payman Zarkesh-Ha, Robert Efroymson, Earl Fuller et al. | 2020 | 2 |
| 42 | The application of wavelet shrinkage denoising to magnetic Barkhausen noise measurements James J. Thomas · AIP conference proceedings | 2014 | 2 |
| 43 | Non-Destructive 3-D Determination of Interior Stresses Shiang‐Jiun Lin, Simon Quinn, B. R. Boyce et al. · Applied Mechanics and Materials | 18 Aug 2011 | 2 |
| 44 | Using Magnetic Barkhausen Noise to Analyze Case Depth James J. Thomas · AM&P Technical Articles | Jun 2015 | 1 |
| 45 | High Power, High Efficiency Red Laser Diode Structures Grown on GaAs and GaAsP Metamorphic Superlattices Steven Ruder, Tom Earles, Christian Galstad et al. · Conference on Lasers and Electro-Optics | 2018 | 1 |
| 46 | Deformation Data from Thermal Marking M. Heredia Ortiz, Eann A. Patterson, J. R. Lesniak · Strain | Nov 2003 | 1 |
| 47 | Structural integrity assessment via coating tolerant thermography Jon R. Lesniak, Daniel J. Bazile, Michael J. Zickel · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 13 Nov 1996 | 1 |
| 48 | WITHDRAWN: Stress analysis of a pinned wood joint by grey-field photoelasticity B.E. Foust, J. R. Lesniak, Robert E. Rowlands · Composites Part B Engineering | Sep 2012 | 1 |
| 49 | Combining Thermoelastic and Stress Function Data to Evaluate Individual Stresses Around a Near-Edge Hole Shun-Tien Lin, Robert E. Rowlands, I. M. Kincaid et al. | 2007 | 1 |
| 50 | An Array Measurement System for Thermoelastic Stress Analysis CS Welch, K. Elliott Cramer, J. R. Lesniak et al. | 1997 | 1 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.