Science Explorer Back to mapMap

Most cited papers from Technology Assessment and Transfer (United States)

Technology Assessment and Transfer (United States)

What are the most cited papers from Technology Assessment and Transfer (United States)?

The most cited paper from Technology Assessment and Transfer (United States) is "Photopolymerization of powder suspensions for shaping ceramics" (John W. Halloran, Vladislava Tomeckova, Susan P. Gentry et al., 2010), with 203 citations. Next come "A dose-response analysis and quantitative assessment of lung cancer risk and occupational cadmium exposure" (140) and "Nanocoatings on Cutting Tools For Dry Machining" (90).

Showing 50 of 65 papers. Every paper is listed.

Most cited papers, sortable by citations and release date
#Paper
1 Photopolymerization of powder suspensions for shaping ceramics John W. Halloran, Vladislava Tomeckova, Susan P. Gentry et al. · Journal of the European Ceramic Society 31 Dec 2010 203
2 A dose-response analysis and quantitative assessment of lung cancer risk and occupational cadmium exposure Leslie Thomas Stayner, Randall J. Smith, Michael J. Thun et al. · Annals of Epidemiology May 1992 140
3 Nanocoatings on Cutting Tools For Dry Machining Frank M. Kustas, L.L. Fehrehnbacher, R. Komanduri · CIRP Annals 1997 90
4 Vat polymerization-printed partially stabilized zirconia: Mechanical properties, reliability and structural defects Carli Marsico, Marit Øilo, Jeffrey Kutsch et al. · Additive manufacturing Open access 12 Jul 2020 83
5 Discrete Element Modeling Applied to Laboratory Simulation of Near-Wellbore Mechanics Benjamin K. Cook, M. Y. Lee, Anthony A. DiGiovanni et al. · International Journal of Geomechanics 20 Feb 2004 51
6 Investigation of quaternary Al-based quasicrystal thin films for corrosion protection V.N. Balbyshev, David J. King, Alexander N. Khramov et al. · Thin Solid Films 17 Nov 2003 47
7 Regional and Local Scale Modeling of Stream Temperatures and Spatio-Temporal Variation in Thermal Sensitivities Robert H. Hilderbrand, Michael T. Kashiwagi, Anthony P. Prochaska · Environmental Management 16 Apr 2014 46
8 Hard transparent domes and windows from magnesium aluminate spinel Anthony A. DiGiovanni, Larry L. Fehrenbacher, Don W. Roy · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE Conference paper 18 May 2005 44
9 Transparent spinel development Mark C. L. Patterson, Jenni E. Caiazza, Donald W. Roy · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE Conference paper 25 Oct 2000 44
10 Carbon/carbon–boron nitride composites with improved wear resistance compared to carbon/carbon Steven Seghi, Brian Fabio, James Economy · Carbon 2004 41
11 Loop heat pipe technology for cooling computer servers Walter R. Zimbeck, Greg Slavik, John Cennamo et al. · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems Conference paper May 2008 40
12 Advanced HfC-TaC Oxidation Resistant Composite Rocket Thruster Mark C. L. Patterson, S. He, L. Fehrenbacher et al. · Materials and Manufacturing Processes May 1996 35
13 Additive manufacturing of lithium disilicate glass-ceramic by vat polymerization for dental appliances Carli Marsico, Izabela Maeret Carpenter, Jeffrey Kutsch et al. · Dental Materials Open access 21 Nov 2022 30
14 Recovery of EDTA from Power Plant Boiler Chemical Cleaning Wastewater Chin‐Pao Huang, Mei-Chih Hsu, Paul T. Miller · Journal of Environmental Engineering Oct 2000 30
15 Physical vapor deposition route for production of Al–Cu–Fe–Cr and Al–Cu–Fe quasicrystalline and approximant coatings M.J. Daniels, David King, L. Fehrenbacher et al. · Surface and Coatings Technology 17 Sep 2004 29
16 Spinel: gaining momentum in optical applications Mark C. L. Patterson, Anthony A. DiGiovanni, L. Fehrenbacher et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE Conference paper 25 Sep 2003 27
17 Rate effects on the mechanical response of magnesium aluminate spinel Xu Nie, Jared Wright, Weinong W. Chen et al. · Materials Science and Engineering A 16 Mar 2011 25
18 Stereolithographically fabricated aluminum nitride microchannel substrates for integrated power electronics cooling Nicholas R. Jankowski, Lauren Everhart, Bruce R. Geil et al. · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems Conference paper May 2008 20
19 Stable quasicrystalline phase in Al-Cu-Fe-Cr coating materials X. Z. Li, Laurence D. Marks, Joseph Maciejewski et al. · Metallurgical and Materials Transactions A Mar 2002 19
20 Tumor growth inhibition by synthetic and expressed siRNA targeting focal adhesion kinase Kae Tsutsumi, Tatsuhiko Kasaoka, Hyi-Man Park et al. · International Journal of Oncology Open access Jul 2008 16
21 Population genomic structure of a widespread, urban‐dwelling mammal: The eastern grey squirrel (Sciurus carolinensis) Nicole Fusco et al. · Molecular Ecology Open access 11 Dec 2023 10
22 Growth of diamond crystals by combustion synthesis R. Komanduri, K. S. Snail, L. Fehrenbacher · Philosophical Magazine Letters Oct 1990 10
23 Fabrication of large thick panels of transparent spinel Mark C. L. Patterson, Gary A. Gilde, Donald W. Roy · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE Conference paper 2 Nov 2001 10
24 RATIONAL FERTILIZER PRACTICE ON PUMICE SOILS M. R. J. Toxopeus, R.B. Gordon · Proceedings of the New Zealand Grassland Association Open access 1971 9
25 Polycrystalline transparent spinel domes for multimode seeker applications Anthony A. DiGiovanni, A. LaRoche, L. Schubel et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE Conference paper 27 Apr 2007 9
26 Spinel Armor— Clearly the Way to Go Mark C. L. Patterson, Anthony A. DiGiovanni, Gary A. Gilde et al. · Ceramic engineering and science proceedings Book chapter 27 Mar 2008 9
27 An Economic Comparison of Hot Pressing vs. Pressureless Sintering for Transparent Spinel Armor A. LaRoche, Keith Rozenburg, John Voyles et al. · Ceramic engineering and science proceedings Book chapter Apr 2009 9
28 Modular Two-Phase Heat Transfer Based Architecture for Future Responsive Spacecraft David C. Bugby, Walter R. Zimbeck, Edward J. Kroliczek Conference paper 7 Apr 2008 8
29 Nature of the as-deposited state of AlCuFeCr PVD coatings M.J. Daniels, David King, B.S. Phillips et al. · Thin Solid Films 16 Jul 2003 8
30 Additively-Manufactured All-Dielectric Microwave Polarization Converters Using Ceramic Stereolithography Steve M. Young, Mark Kauf, Jeffrey Kutsch et al. · IEEE Open Journal of Antennas and Propagation Open access 2023 7
31 In situ ellipsometric study of As capping and low temperature molecular-beam epitaxy GaAs growth and implications for the low temperature critical thickness Kurt G. Eyink, Y. S. Cong, Rosalind Ann Gilbert et al. · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena Jul 1993 7
32 Governing Parameters Influencing CMAS Adhesion and Infiltration Into Environmental/Thermal Barrier Coatings in Gas Turbine Engines Anindya Ghoshal, Michael Walock, Muthuvel Murugan et al. · Volume 6: Ceramics; Controls, Diagnostics, and Instrumentation; Education; Manufacturing Materials and Metallurgy Conference paper 17 Jun 2019 6
33 Coupling with an Adjustable Compound Iris in a Single Mode Applicator Hussamaldin S. Sa'adaldin, W. M. Black, Iftikhar Ahmad et al. · MRS Proceedings 1992 6
34 Residual stress, atomic structure, and growth morphology in B4C/SiC multilayer coatings Jeff Hershberger, Tao Ying, Frank M. Kustas et al. · Surface and Coatings Technology Dec 1996 6
35 Mesoscale Machines and Electronics: “There’s Plenty of Room in the Middle” William L. Warren, Lawrence H. Dubois, Steven G. Wax et al. · Advanced Energy Systems Conference paper 14 Nov 1999 5
36 Efficient Catechol Sensing in Newly Synthesized 2D Material Ti2B MBene: Insights from Density Functional Theory Simulations Gopal Sanyal, Antara Vaidyanathan, A T Sathya et al. · Langmuir 12 Aug 2025 4
37 An Investigation of Sputtered Al-Cu-Fe-Cr Quasicrystalline Films Via Synchrotron Diffraction M.J. Daniels, Joseph Maciejewski, Jeffrey S. Zabinski et al. · MRS Proceedings 2000 4
38 Structure Determination of B4C and SiC Thin Films Via Synchrotron High-Resolution Diffraction Jeff Hershberger, Frank M. Kustas, Zofia U. Rek et al. · MRS Proceedings 1997 4
39 Automated Fabrication of Ceramic Electronic Packages by Stereo-Photolithography Walter R. Zimbeck, Jae Hyuk Jang, Walter A. Schulze et al. · MRS Proceedings 2000 4
40 Microwave Joining of Silicon Carbide Using Several Different Approaches Iftikhar Ahmad, Richard Silberglitt, W. M. Black et al. · MRS Proceedings 1992 4
41 An Integer Support Vector Machine Maryanne Domm, Andrew G. Engel, P. Pierre-Louis et al. Conference paper 7 Jun 2005 4
42 Manufacturing issues for polycrystalline transparent spinel domes A. LaRoche, Jeffrey Kutsch, K. Rozenberg et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE Conference paper 16 Apr 2009 3
43 SMARTS Thermal Architecture for PnPSat-2 David C. Bugby, Walter R. Zimbeck, Jeffrey C. Preble et al. · AIP conference proceedings Conference paper 2010 3
44 Thermal Management Architecture for Future Responsive Spacecraft David C. Bugby, Walter R. Zimbeck, Edward J. Kroliczek et al. · AIP conference proceedings Conference paper 2009 3
45 Joining Ceramics Using Microwave Energy Iftikhar Ahmad, Richard Silberglitf · MRS Proceedings 1993 2
46 In situ Fracture and Adhesion Failure of Al-Cu-Fe Quasicrystalline Films M.J. Daniels, Benjamin L. French, David King et al. · MRS Proceedings 2002 2
47 Manufacturing solutions for polycrystalline transparent spinel domes A. LaRoche, Jeffrey Kutsch, L. Fehrenbacher · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE Conference paper 9 May 2011 2
48 Polycrystalline Diamond Films and Single Crystal Diamonds Grown by Combustion Synthesis R. Komanduri, L. Fehrenbacher, Leonard M. Hanssen et al. · CIRP Annals 1990 2
49 Advanced High Temperature Propulsion Materials Research Project: An Update Anindya Ghoshal, Andy Nieto, Larry L. Fehrenbacher et al. Conference paper 13 May 2019 1
50 Future Application Trends - a Case for Mechanistic Approaches Larry L. Fehrenbacher · MRS Proceedings 1988 1

Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.