| 1 |
Review of Relationship Between Particle Deformation, Coating Microstructure, and Properties in High-Pressure Cold Spray
M.R. Rokni, Steven Nutt, Christian A. Widener et al. · Journal of Thermal Spray Technology
|
5 Jun 2017 |
304 |
| 2 |
Influence of feedstock powder and cold spray processing parameters on microstructure and mechanical properties of Ti-6Al-4V cold spray depositions
Venkata Satish Bhattiprolu, Kyle Johnson, Ozan Ç. Özdemir et al. · Surface and Coatings Technology
Open access |
7 Dec 2017 |
105 |
| 3 |
Application of High-Pressure Cold Spray for an Internal Bore Repair of a Navy Valve Actuator
Christian A. Widener, M. J. Carter, Ozan Ç. Özdemir et al. · Journal of Thermal Spray Technology
|
15 Dec 2015 |
97 |
| 4 |
Depositing Al-Based Metallic Coatings onto Polymer Substrates by Cold Spray
M.R. Rokni, Po‐Lun Feng, Christian A. Widener et al. · Journal of Thermal Spray Technology
|
5 Sep 2019 |
64 |
| 5 |
Structural repair using cold spray technology for enhanced sustainability of high value assets
Christian A. Widener, Ozan Ç. Özdemir, Michael Carter · Procedia Manufacturing
Open access |
2018 |
63 |
| 6 |
Predicting the Effects of Powder Feeding Rates on Particle Impact Conditions and Cold Spray Deposited Coatings
Ozan Ç. Özdemir, Christian A. Widener, Michael J Carter et al. · Journal of Thermal Spray Technology
|
10 Aug 2017 |
48 |
| 7 |
Carbon nanotubes grease with high electrical conductivity
Greg Christensen, Jack Yang, Ding Lou et al. · Synthetic Metals
|
2 Jul 2020 |
42 |
| 8 |
Electrochemical stability of lithium halide electrolyte with antiperovskite crystal structure
Matthew Dondelinger, J. M. Swanson, Golibsho Nasymov et al. · Electrochimica Acta
Open access |
13 Mar 2019 |
39 |
| 9 |
Influence of Powder Microstructure on the Microstructural Evolution of As-Sprayed and Heat Treated Cold-Sprayed Ti-6Al-4V Coatings
Venkata Satish Bhattiprolu, Kyle Johnson, Grant A. Crawford · Journal of Thermal Spray Technology
|
5 Dec 2018 |
37 |
| 10 |
Hydrogen bonding enhanced thermally conductive carbon nano grease
Greg Christensen, Hammad A. Younes, George Hong et al. · Synthetic Metals
|
13 Nov 2019 |
32 |
| 11 |
Microstructure and mechanical properties of cold spray additive manufactured Cu-Cr-Nb and Fe-Ni-Cr alloys
Bharat K. Jasthi, Terrence S. Kuca, Marius Ellingsen et al. · Additive manufacturing
Open access |
8 Dec 2022 |
30 |
| 12 |
Multi-axis tool path optimization and deposition modeling for cold spray additive manufacturing
Isaac M. Nault, Gehn D. Ferguson, Aaron T. Nardi · Additive manufacturing
|
18 Dec 2020 |
27 |
| 13 |
Thermal stability and mechanical properties of cold-sprayed Nickel-Yttria coating
Bharat Gwalani, Miao Song, Joshua A. Silverstein et al. · Scripta Materialia
Open access |
20 Sep 2021 |
20 |
| 14 |
Stress corrosion cracking mechanism of cold spray coating on a galvanically similar substrate
Haozheng J. Qu, Jayendran Srinivasan, Yangyang Zhao et al. · Materials Science and Engineering A
Open access |
7 Jun 2022 |
16 |
| 15 |
Influence of Powder Heat Treatment on the Microstructure and Mechanical Properties of Cold Sprayed Ti-6Al-4V Coatings
Venkata Satish Bhattiprolu, Kyle Johnson, Grant A. Crawford · Journal of Thermal Spray Technology
|
24 Nov 2021 |
16 |
| 16 |
High Rate Deposition in Cold Spray
Ozan Ç. Özdemir, Patricia Schwartz, Sinan Müftü et al. · Journal of Thermal Spray Technology
|
2021 |
16 |
| 17 |
Application of Mass Finishing for Surface Modification of Copper Cold Sprayed Material Consolidations
Matthew A. Gleason, Bryer C. Sousa, Kyle L. Tsaknopoulos et al. · Materials
Open access |
10 Mar 2022 |
15 |
| 18 |
Enhanced electrical conductivity of anticorrosive coatings by functionalized carbon nanotubes: effect of hydrogen bonding
Ding Lou, Hammad A. Younes, Jack Yang et al. · Nanotechnology
|
24 Dec 2021 |
14 |
| 19 |
Measuring the Impact of a New Mechanical Engineering Sophomore Design Course on Students’ Systems Thinking Skills
Cassandra M. Degen, Karim Heinz Muci-Kuchler, Mark Bedillion et al.
Conference paper |
9 Nov 2018 |
12 |
| 20 |
Effect of post-deposition heat treatment on microstructure and mechanical properties of NASA HR-1 cold spray coatings
Sathwik Tirukandyur, Venkata A.S. Kandadai, Marius Ellingsen et al. · Surface and Coatings Technology
Open access |
26 Mar 2024 |
10 |
| 21 |
Evaluation of a laser powder bed fusion designer Al-Mg-Zr-Si alloy for cold spray additive manufacturing
Kyle L. Tsaknopoulos, Jack Grubbs, Bryer C. Sousa et al. · Materials & Design
Open access |
29 Aug 2022 |
10 |
| 22 |
Prediction of Geometry-Induced Porosity in Cold Spray Additive Manufacturing of Leading Edges
Isaac M. Nault, Marius Ellingsen, Aaron T. Nardi · Journal of Thermal Spray Technology
|
28 Feb 2024 |
7 |
| 23 |
Enhancement of Ti-6Al-4V powder surface properties for cold spray deposition using fluidized Gas-Nitriding technique
Randolph C.V. McGee, Ying She, Aaron T. Nardi et al. · Materials Letters
|
4 Feb 2021 |
7 |
| 24 |
Investigation of Adaptive Filtering for Noisy ECG Signals
Nian Zhang, Bernt Askildsen, Brian T. Hemmelman
Conference paper |
Jul 2006 |
7 |
| 25 |
Microstructure and Mechanical Properties of Cold-Sprayed Ni/CrC-NiCr Composites with Varying Binder Phases
Sohayb Batwa, Ahmad Nourian, Scott Julien et al. · Journal of Thermal Spray Technology
|
5 Dec 2024 |
6 |
| 26 |
In situ observations of grain growth and recovery in cold sprayed Ni-Y2O3 and CP-Ni coatings using hot-stage TEM
Anqi Yu, Kenneth A. Ross, Kyle Johnson et al. · Materials Characterization
Open access |
8 Aug 2022 |
6 |
| 27 |
Heterogeneous Distribution of Mechanical Properties of Single-Particle Cold Spray Impacts
Ahmed A. Hemeda, Anupam Mishra, Jie Xu et al. · Journal of Thermal Spray Technology
|
Feb 2022 |
6 |
| 28 |
Mechanical properties and microstructure of annealed Ni/CrC-NiCr metal matrix composite prepared by cold sprayed deposition
Sohayb Batwa, Ahmad Nourian, David A. Brennan et al. · Materials Science and Engineering A
Open access |
19 May 2025 |
5 |
| 29 |
Understanding Cold Spray for Enhanced Manufacturing Sustainability
Christian A. Widener, Marius Ellingsen, Michael Carter · Materials science forum
Open access |
26 Dec 2018 |
5 |
| 30 |
Thermal Preprocessing of Rapidly Solidified Al 6061 Feedstock for Tunable Cold Spray Additive Manufacturing
Baillie Haddad, Bryer C. Sousa, Kyle L. Tsaknopoulos et al. · Metals
Open access |
18 Jul 2022 |
3 |
| 31 |
Applications
Victor Kenneth Champagne, D.J. Helfritch, Christian A. Widener et al.
Book chapter |
2021 |
3 |
| 32 |
Advancements in Cold Spray
Ozan Ç. Özdemir, Aaron T. Nardi, Aaron Birt et al.
Book chapter |
2021 |
3 |
| 33 |
Microstructure, Mechanical, and Corrosion Properties of 304 Stainless Steel-H13 Tool Steel Composite Cold Spray Coatings
Kole C. Vollmer, Kyle Johnson, Matthew Dondelinger et al. · Journal of Thermal Spray Technology
|
4 Mar 2024 |
2 |
| 34 |
Supersonic cold-sprayed Si composite alloy as anode for Li-ion batteries
Ding Lou, Haiping Hong, Marius Ellingsen et al. · Applied Physics Letters
|
9 Jan 2023 |
2 |
| 35 |
Designing and Adapting Services to Create Value Outside a Hospital Using Blockchain Architecture
Mohan Rao Tanniru, Robert Tanniru · International Journal of R&D Innovation Strategy
Open access |
2020 |
2 |
| 36 |
Effects of post-deposition heat treatment on the microstructure and dry sliding wear behavior of cold-sprayed Ni/CrC-NiCr composite
Sohayb Batwa, Ahmad Nourian, Anastasios Gavras et al. · Wear
Open access |
3 Aug 2026 |
1 |
| 37 |
Applications of cold spray
Victor Kenneth Champagne, Aaron T. Nardi, Christian A. Widener · Elsevier eBooks
Book chapter |
2023 |
1 |
| 38 |
Case Studies from Boiler Tube Failures in the Electric Power Generating Industry
Anastasios G. Gavras, Paul Winn · Elsevier eBooks
Book chapter |
27 Aug 2022 |
1 |
| 39 |
Navy Valve Actuator Repair Using Cold Spray
Christian A. Widener, M. J. Carter, Rob Hrabe et al. · Thermal spray
Conference paper |
11 May 2015 |
1 |
| 40 |
Pilot-Scale Testing and Preliminary Commercial System Design of a Gas-Fired Advanced Glass Melting Furnace
D.J. Bender, J. G. Hnat, A. F. Lltka et al. · Ceramic engineering and science proceedings
Book chapter |
26 Mar 2008 |
1 |
| 41 |
PRISM: A Probabilistic Regime-Integrated Scalping Model for Derivatives Arbitrage: A Unified Framework for Gamma Scalping, Markov Regime Dynamics, Futures Basis Arbitrage, and Stochastic Control in Equity Derivatives Markets
Divyanshu Verma · SSRN Electronic Journal
PreprintOpen access |
2026 |
0 |
| 42 |
Detecting Liquidity Stress Before Crises: Order Flow Toxicity, VPIN, and Hidden Fragility in Modern Markets
Divyanshu Verma · SSRN Electronic Journal
PreprintOpen access |
2026 |
0 |
| 43 |
Market Impact Models for Small Funds: Practical Execution Alpha, Intraday Liquidity Dynamics, and the Microstructure of Trading Cost
Divyanshu Verma · SSRN Electronic Journal
PreprintOpen access |
2026 |
0 |
| 44 |
Volatility as an Asset Class: Carry, Convexity, Crash Risk, and Hedge Fund Implementation
Divyanshu Verma · SSRN Electronic Journal
PreprintOpen access |
2026 |
0 |
| 45 |
AEGIS: An Autonomous Equity Grading and Intelligence System
Divyanshu Verma · SSRN Electronic Journal
PreprintOpen access |
2026 |
0 |
| 46 |
Valuation as Mindset: Subjectivity, Dynamism, and Probabilistic Thinking in Equity Valuation
Divyanshu Verma · SSRN Electronic Journal
PreprintOpen access |
2026 |
0 |
| 47 |
Feasibility of on-site generated nitrogen as a sustainable cold spray process gas
Caroline Dowling, Kyle L. Tsaknopoulos, Marius Ellingsen et al. · npj Materials Sustainability
Open access |
31 Oct 2025 |
0 |
| 48 |
Microstructure and Corrosion Properties of NASA HR-1 Cold-Sprayed Coatings
Hindu Vardhan Ramineni, Venkata A.S. Kandadai, Sathwik Tirukandyur et al. · JOM
|
30 Oct 2025 |
0 |
| 49 |
Effect of Cold Spray on Environmental Corrosion Impacts of Ferritic Stainless Steel 410L
Yoel Emun, Kyle Johnson, Gregory W. Kubacki · Journal of Thermal Spray Technology
|
21 Oct 2025 |
0 |
| 50 |
The Development of Cold Spray Surface Preparation and Coatings for Crack Sealing of Postulated Chloride-Induced Stress Corrosion Cracking (CISCC) of Dry Cask Storage System (DCSS) Canisters
J. P. Lacy, Jon Tatman, Shannon Chu et al.
Conference paper |
20 Jul 2025 |
0 |