Most cited papers in Advanced Machining and Optimization Techniques
What are the most cited papers in Advanced Machining and Optimization Techniques?
The most cited paper in Advanced Machining and Optimization Techniques is "State of the art electrical discharge machining (EDM)" (K.H Ho, Stephen T. Newman, 2003), with 1,697 citations. Next come "Modeling of strength of high-performance concrete using artificial neural networks" (1,457) and "Design optimization of cutting parameters for turning operations based on the Taguchi method" (1,302).
Showing 50 of 100 papers. Every paper with more than 414 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | State of the art electrical discharge machining (EDM) K.H Ho, Stephen T. Newman · International Journal of Machine Tools and Manufacture | 12 Sep 2003 | 1,697 |
| 2 | Modeling of strength of high-performance concrete using artificial neural networks I‐Cheng Yeh · Cement and Concrete Research | Dec 1998 | 1,457 |
| 3 | Design optimization of cutting parameters for turning operations based on the Taguchi method Weihong Yang, Y.S. Tarng · Journal of Materials Processing Technology | Dec 1998 | 1,302 |
| 4 | Machining induced surface integrity in titanium and nickel alloys: A review Durul Ulutan, Tuğrul Özel · International Journal of Machine Tools and Manufacture | 25 Nov 2010 | 1,262 |
| 5 | RAPID MANUFACTURING AND RAPID TOOLING WITH LAYER MANUFACTURING (LM) TECHNOLOGIES, STATE OF THE ART AND FUTURE PERSPECTIVES Gideon N. Levy, Ralf Schindel, Jean‐Pierre Kruth · CIRP Annals | 2003 | 1,122 |
| 6 | Ductile-Regime Grinding: A New Technology for Machining Brittle Materials Thomas G. Bifano, T. A. Dow, R.O. Scattergood · Journal of Engineering for Industry | May 1991 | 1,120 |
| 7 | Chatter in machining processes: A review Guillem Quintana, Joaquim Ciurana · International Journal of Machine Tools and Manufacture | 18 Jan 2011 | 1,032 |
| 8 | Digital twin driven prognostics and health management for complex equipment Fei Tao, Meng Zhang, Yushan Liu et al. · CIRP Annals | 2018 | 986 |
| 9 | A review on current research trends in electrical discharge machining (EDM) Norliana Mohd Abbas, Darius Gnanaraj Solomon, Md. Fuad Bahari · International Journal of Machine Tools and Manufacture | 20 Nov 2006 | 956 |
| 10 | Key improvements in the machining of difficult-to-cut aerospace superalloys Emmanuel Okechukwu Ezugwu · International Journal of Machine Tools and Manufacture | 29 Mar 2005 | 945 |
| 11 | Surface integrity in material removal processes: Recent advances Ibrahim S. Jawahir, Ekkard Brinksmeier, Rachid M’Saoubi et al. · CIRP Annals | 2011 | 936 |
| 12 | Dry Machining and Minimum Quantity Lubrication Klaus Weinert, Ichiro INASAKI, John W. Sutherland et al. · CIRP Annals | 2004 | 917 |
| 13 | Advancing EDM through Fundamental Insight into the Process Masanori Kunieda, Bert Lauwers, Kamlakar P. Rajurkar et al. · CIRP Annals | 2005 | 909 |
| 14 | Laser beam machining—A review Avanish Kumar Dubey, Vinod Yadava · International Journal of Machine Tools and Manufacture | 6 Dec 2007 | 892 |
| 15 | Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids Alborz Shokrani, Vimal G. Dhokia, Stephen T. Newman · International Journal of Machine Tools and Manufacture | 17 Feb 2012 | 864 |
| 16 | The machinability of nickel-based alloys: a review Emmanuel Okechukwu Ezugwu, Z.M. Wang, Álisson Rocha Machado · Journal of Materials Processing Technology | Feb 1999 | 859 |
| 17 | Chatter Stability of Metal Cutting and Grinding Yusuf Altıntaş, Manfred Weck · CIRP Annals | 2004 | 842 |
| 18 | Prediction of Milling Force Coefficients From Orthogonal Cutting Data Erhan Budak, Yusuf Altıntaş, E.J.A. Armarego · Journal of Manufacturing Science and Engineering | May 1996 | 819 |
| 19 | Environmental friendly cutting fluids and cooling techniques in machining: a review Sujan Debnath, Moola Mohan Reddy, Qua Sok Yi · Journal of Cleaner Production | 12 Aug 2014 | 816 |
| 20 | Recent Advances in Mechanical Micromachining D. A. Dornfeld, Sangkee Min, Yoshimi TAKEUCHI · CIRP Annals | 2006 | 811 |
| 21 | A review of mechanical drilling for composite laminates Defu Liu, Yongjun Tang, Weilong Cong · Composite Structures | 3 Dec 2011 | 784 |
| 22 | State of the art in wire electrical discharge machining (WEDM) K.H Ho, Stephen T. Newman, Shahin Rahimifard et al. · International Journal of Machine Tools and Manufacture | 17 Jun 2004 | 772 |
| 23 | Review of ultrasonic vibration-assisted machining in advanced materials Zhichao Yang, Lida Zhu, Guixiang Zhang et al. · International Journal of Machine Tools and Manufacture | 10 Jul 2020 | 769 |
| 24 | Application of Taguchi method in the optimization of end milling parameters Jaharah Abd GHANI, Imtiaz Ahmed Choudhury, Hazrina Hassan · Journal of Materials Processing Technology | 29 Oct 2003 | 768 |
| 25 | Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates Wen-Chou Chen · International Journal of Machine Tools and Manufacture | Aug 1997 | 760 |
| 26 | Investigation of micro-cutting operations Ji-Yong Chae, Simon S. Park, Theodor I. Freiheit · International Journal of Machine Tools and Manufacture | 3 Aug 2005 | 759 |
| 27 | Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel Mohd Yusof Noordin, V.C. Venkatesh, Safian Sharif et al. · Journal of Materials Processing Technology | 9 Oct 2003 | 743 |
| 28 | Machining of Composite Materials Roberto Teti · CIRP Annals | 2002 | 742 |
| 29 | Rapid manufacturing of metal components by laser forming Edson Costa Santos, Masanori Shiomi, Kozo Osakada et al. · International Journal of Machine Tools and Manufacture | 3 Nov 2005 | 738 |
| 30 | A review of developments towards dry and high speed machining of Inconel 718 alloy D. Dudzinski, Arnaud Devillez, A. Moufki et al. · International Journal of Machine Tools and Manufacture | 10 Dec 2003 | 729 |
| 31 | A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials Meltem Altın Karataş, Hasan Gökkaya · Defence Technology | 12 Feb 2018 | 725 |
| 32 | Chatter suppression techniques in metal cutting Jokin Muñoa, Xavier Beudaert, Zoltán Dombóvári et al. · CIRP Annals | 2016 | 725 |
| 33 | State-of-the-art in surface integrity in machining of nickel-based super alloys Ajay D. Thakur, S. Gangopadhyay · International Journal of Machine Tools and Manufacture | 21 Oct 2015 | 717 |
| 34 | Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning Muammer Nalbant, Hasan Gökkaya, Gökhan Sur · Materials & Design (1980-2015) | 25 Mar 2006 | 705 |
| 35 | Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks Tuğrul Özel, Yiğit Karpat · International Journal of Machine Tools and Manufacture | 4 Nov 2004 | 699 |
| 36 | Analytical Prediction of Chatter Stability in Milling—Part I: General Formulation Erhan Budak, Yusuf Altıntaş · Journal of Dynamic Systems Measurement and Control | Mar 1998 | 699 |
| 37 | Dry machining: Machining of the future P. S. Sreejith, B. K. A. Ngoi · Journal of Materials Processing Technology | Apr 2000 | 687 |
| 38 | A review of focused ion beam applications in microsystem technology Steve Reyntjens, Robert Puers · Journal of Micromechanics and Microengineering | Jul 2001 | 681 |
| 39 | A Comparative Study on Machine Learning Algorithms for Smart Manufacturing: Tool Wear Prediction Using Random Forests Dazhong Wu, Connor Jennings, Janis P. Terpenny et al. · Journal of Manufacturing Science and Engineering | 28 Mar 2017 | 674 |
| 40 | New Developments in Electro-Chemical Machining Kamlakar P. Rajurkar, Di Zhu, Joseph Anthony McGeough et al. · CIRP Annals | 1999 | 669 |
| 41 | Microforming—from basic research to its realization Ulf Engel, R. Eckstein · Journal of Materials Processing Technology | Sep 2002 | 638 |
| 42 | Machinability of nickel-base super alloys: a general review Imtiaz Ahmed Choudhury, M.A. El-Baradie · Journal of Materials Processing Technology | May 1998 | 623 |
| 43 | Theoretical models of the electrical discharge machining process. I. A simple cathode erosion model Daryl D. DiBitonto, Philip T. Eubank, Mukund R. Patel et al. · Journal of Applied Physics | Nov 1989 | 605 |
| 44 | Machinability of titanium alloys (Ti6Al4V and Ti555.3) P.J. Arrazola, Ainhara Garay, Luis María Iriarte et al. · Journal of Materials Processing Technology | 23 Jun 2008 | 604 |
| 45 | Thermal Analysis of Grinding S. D. Malkin, Changsheng Guo · CIRP Annals | 2007 | 597 |
| 46 | Electrochemical Micromachining Rolf Schuster, Viola Kirchner, P. Allongue et al. · Science | 7 Jul 2000 | 588 |
| 47 | Tool wear characteristics in machining of nickel-based superalloys Dahu Zhu, Xiao-Ming Zhang, Han Ding · International Journal of Machine Tools and Manufacture | 25 Aug 2012 | 588 |
| 48 | Wire Electro-Discharge Grinding for Micro-Machining Takahisa Masuzawa, Masahisa Fujino, K. Kobayashi et al. · CIRP Annals | 1985 | 577 |
| 49 | An Environmental Analysis of Machining Jeffrey B. Dahmus, Timothy G. Gutowski | 2004 | 559 |
| 50 | A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates João Paulo Davim, Juan Carlos Campos Rúbio, Alexandre Mendes Abrão · Composites Science and Technology | 22 Nov 2006 | 557 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for a field when OpenAlex files it under one of the field's topics; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.