Most cited papers in Advancements in Materials Engineering
What are the most cited papers in Advancements in Materials Engineering?
The most cited paper in Advancements in Materials Engineering is "Protective coatings in the gas turbine engine" (J. T. DeMasi-Marcin, Dinesh K. Gupta, 1994), with 493 citations. Next come "Xi. The origin of fatigue fracture in copper" (432) and "THE KINETIC NATURE OF THE STRENGTH OF SOLIDS" (419).
Showing 50 of 100 papers. Every paper with more than 55 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Protective coatings in the gas turbine engine J. T. DeMasi-Marcin, Dinesh K. Gupta · Surface and Coatings Technology | Dec 1994 | 493 |
| 2 | Xi. The origin of fatigue fracture in copper N. Thompson, N. J. Wadsworth, N. Louat · Philosophical magazine | Feb 1956 | 432 |
| 3 | THE KINETIC NATURE OF THE STRENGTH OF SOLIDS V. R. Regel’, A. I. Slutsker, É E Tomashevskiĭ · Soviet Physics Uspekhi | 31 Jan 1972 | 419 |
| 4 | High Nitrogen Steels. Nickel Free High Nitrogen Austenitic Steels. Peter J. Uggowitzer, Ruth Magdowski, Markus O. Speidel · ISIJ International | 1996 | 247 |
| 5 | Effect of welding processes on mechanical and microstructural characteristics of high strength low alloy naval grade steel joints Seerangan Ragu Nathan, V. Balasubramanian, S. Malarvizhi et al. · Defence Technology | 2 Jul 2015 | 227 |
| 6 | Induction heating of continuous carbon-fibre-reinforced thermoplastics R. Rudolf, Peter Mitschang, M. Neitzel · Composites Part A Applied Science and Manufacturing | Nov 2000 | 187 |
| 7 | The Morphology of Microstructure Composed of Lath Martensites in Steels Tadashi Maki, Kaneaki Tsuzaki, Imao Tamura · Transactions of the Iron and Steel Institute of Japan | 15 Apr 1980 | 186 |
| 8 | The Li-Mg (Lithium-Magnesium) system A. A. Nayeb-Hashemi, J. B. Clark, Arthur D. Pelton · Bulletin of Alloy Phase Diagrams | Aug 1984 | 174 |
| 9 | Listening to the sound of materials: Acoustic emission for the analysis of material behaviour Martine Wevers · NDT & E International | Apr 1997 | 172 |
| 10 | Application of thermal spraying in the automobile industry Barbezat Gérard · Surface and Coatings Technology | 7 Jun 2006 | 171 |
| 11 | Comparison of surgical techniques for early-stage thymoma: Feasibility of minimally invasive thymectomy and comparison with open resection Arjun Pennathur, Irfan R. Qureshi, Matthew J. Schuchert et al. · Journal of Thoracic and Cardiovascular Surgery | 24 Jan 2011 | 166 |
| 12 | Heat Source Models in Numerical Simulations of Laser Welding Tomasz Kik · Materials | 10 Jun 2020 | 158 |
| 13 | Robot-aided thoracoscopic thymectomy for early-stage thymoma: A multicenter European study Giuseppe Marulli, Federico Rea, Franca M. A. Melfi et al. · Journal of Thoracic and Cardiovascular Surgery | 31 Aug 2012 | 148 |
| 14 | Electrode components of the arc discharge G. Eoker | 6 Oct 2007 | 144 |
| 15 | Materials and manufacturing of advanced industrial gas turbine components M. Konter, Manfred Thumann · Journal of Materials Processing Technology | Nov 2001 | 136 |
| 16 | Effect of Carbon on the Volume Fractions and Lattice Parameters Of Retained Austenite and Martensite C. S. Roberts · JOM | Feb 1953 | 133 |
| 17 | Mechanical clinching of ultra-high strength steel sheets and strength of joints Yohei Abe, Toru Kato, K. Mori et al. · Journal of Materials Processing Technology | 14 Mar 2014 | 132 |
| 18 | Galvanizability of high-strength steels for automotive applications Jan Mahieu, Bruno Charles De Cooman, Serge Claessens · Metallurgical and Materials Transactions A | Nov 2001 | 131 |
| 19 | Chemical Vapor Deposition of Copper from Copper (II) Hexafluoroacetylacetonate Dorota S. Temple, Arnold Reisman · Journal of The Electrochemical Society | Nov 1989 | 127 |
| 20 | New Features of Entall Database: Comparison of Experimental and Model Formation Enthalpies/ Nowe Funkcje Bazy Danych Entall: Porównanie Doświadczalnych I Modelowych Entalpii Tworzenia A. Dębski, R. J. Debski, W. Gąsior · Archives of Metallurgy and Materials | Dec 2014 | 126 |
| 21 | Effect of temperature and composition on surface tension in Fe-Ni-Cr alloys containing sulfur Michael J. McNallan, T. DebRoy · Metallurgical Transactions B | Aug 1991 | 123 |
| 22 | Modelling of CCT diagrams for engineering and constructional steels Jacek Trzaska, L. A. Dobrzański · Journal of Materials Processing Technology | 20 Apr 2007 | 122 |
| 23 | Experimental crack propagation and failure analysis of the first stage compressor blade subjected to vibration Lucjan Witek · Engineering Failure Analysis | 11 Mar 2009 | 114 |
| 24 | Condyloma in Pregnancy Is Strongly Predictive of Juvenile-Onset Recurrent Respiratory Papillomatosis Michael Jonah Silverberg, Poul Thorsen, H Lindeberg et al. · Obstetrics and Gynecology | Apr 2003 | 110 |
| 25 | Resonance of torsional vibrations of centrifugal pump shafts due to cavitation erosion of pump impellers Adam Adamkowski, Adam Henke, Mariusz Lewandowski · Engineering Failure Analysis | 31 Jul 2016 | 108 |
| 26 | Dependence of melting rate in MIG/MAG welding on the type of shielding gas used Marjan Suban, Jaka Tušek · Journal of Materials Processing Technology | Dec 2001 | 104 |
| 27 | The oncological feasibility and limitations of video-assisted thoracoscopic thymectomy for early-stage thymomas Tōru Kimura, Masayoshi Inoue, Yoshihisa Kadota et al. · European Journal of Cardio-Thoracic Surgery | 12 Jun 2013 | 101 |
| 28 | Determination of Economic Packaging Frequency for Items Jointly Replenished S.K. Goyal · Management Science | Oct 1973 | 101 |
| 29 | Nowa norma PN-EN 10025-2:2007 "Wyroby walcowane na gorąco ze stali konstrukcyjnych - Część 2: Warunki techniczne dostawy stali konstrukcyjnych niestopowych" zmiany w stosunku do PN-EN 10025:2002 i szczegóły interpretacji. Jerzy Brózda · Biuletyn Instytutu Spawalnictwa | 2007 | 98 |
| 30 | The Weldability of Modern Structural TMCP Steels. Bruno de Meester · ISIJ International | 1997 | 97 |
| 31 | Tribological behaviour of materials at cryogenic temperatures Wolfgang Hübner, Thomas Gradt, Tanja Schneider et al. · Wear | Apr 1998 | 97 |
| 32 | Methods for the determination of arc stability Marjan Suban, Janez Tušek · Journal of Materials Processing Technology | 31 Oct 2003 | 96 |
| 33 | Changing Properties of Metals by Ferroelectric Polarization Charging H. L. Stadler · Physical Review Letters | 14 Jun 1965 | 96 |
| 34 | Selected bibliography on adhesion measurement of films and coatings K. L. Mittal, Werner Kern · Journal of Adhesion Science and Technology | 1987 | 96 |
| 35 | Phase relations of the Si3N4-AIN-CaO system Zhenkun Huang, Wei-Ying Sun, Dongsheng Yan · Journal of Materials Science Letters | Mar 1985 | 92 |
| 36 | The usage of The Balanced Scorecard for the estimation of the enterprise's effectiveness Joanna K. Michalska · Journal of Materials Processing Technology | 2 Apr 2005 | 92 |
| 37 | The structure of mineral fillers and their stiffening properties in filler-bitumen mastics Wojciech Grabowski, Jarosław Wilanowicz · Materials and Structures | 19 Jul 2007 | 91 |
| 38 | Processing and properties of FeMnAl alloys Carl J. Altstetter, A. P. Bentley, J.W. Fourie et al. · Materials Science and Engineering | Sep 1986 | 90 |
| 39 | Neuroendocrine tumors of the thymus: a clinicopathological and prognostic study Anthony A. Gal, Michael J. Kornstein, C. M. S. Cohen et al. · The Annals of Thoracic Surgery | Oct 2001 | 90 |
| 40 | Contact Potential Difference Measurements by the Kelvin Method J C Rivière · Proceedings of the Physical Society Section B | Jul 1957 | 89 |
| 41 | Calculation of Critical Temperatures by Empirical Formulae Jacek Trzaska · Archives of Metallurgy and Materials | Jun 2016 | 84 |
| 42 | Steam turbine blade failure analysis Zdzislaw Mazur, Rafael García-Illescas, Jorge Aguirre-Romano et al. · Engineering Failure Analysis | 23 Jan 2007 | 84 |
| 43 | Flux effect on void quantity and size in soldered joints David Bušek, Karel Dušek, D. Růžička et al. · Microelectronics Reliability | 11 Mar 2016 | 83 |
| 44 | Low temperature lattice parameter of nickel and some nickel-cobalt alloys and Grüneisen parameter of nickel Jayendra N. Bandyopadhyay, K. P. Gupta · Cryogenics | Jun 1977 | 82 |
| 45 | Direct observation of coherency strains in a copper-cobalt alloy Victor A. Phillips, James D. Livingston · Philosophical magazine | Jun 1962 | 80 |
| 46 | Hybrid laser arc welding of X80 and X120 steel grade Sergej Gook, Andrey Gumenyuk, Michael Rethmeier · Science and Technology of Welding & Joining | Oct 2013 | 80 |
| 47 | Titanium Matrix Composite Ti/TiN Produced by Diode Laser Gas Nitriding A. Lisiecki · Metals | 9 Jan 2015 | 79 |
| 48 | Surface quality of hardened steels after grinding Martin Novák · MANUFACTURING TECHNOLOGY | Dec 2011 | 78 |
| 49 | Experimental Analysis of Passive Intermodulation at Waveguide Flange Bolted Connections Carlos Vicente, Dieter Wolk, Hans Ludwig Hartnagel et al. · IEEE Transactions on Microwave Theory and Techniques | May 2007 | 78 |
| 50 | An experimental investigation on dimensional stability of injected wax patterns of gas turbine blades Seyed Abdol Mohammad Rezavand, Amir Hossein Behravesh · Journal of Materials Processing Technology | Nov 2006 | 77 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for a field when OpenAlex files it under one of the field's topics; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.