Most cited papers in Induction Heating and Inverter Technology
What are the most cited papers in Induction Heating and Inverter Technology?
The most cited paper in Induction Heating and Inverter Technology is "Pulse width modulation for power converters principles and practice" (Donald Grahame Holmes, Thomas Anthony Lipo, 2003), with 2,329 citations. Next come "A comparison of half-bridge resonant converter topologies" (1,965) and "A NEW MODEL FOR SINGLE-LAYER DRYING" (1,557).
Showing 50 of 97 papers. Every paper with more than 224 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Pulse width modulation for power converters principles and practice Donald Grahame Holmes, Thomas Anthony Lipo | 2003 | 2,329 |
| 2 | A comparison of half-bridge resonant converter topologies R.L. Steigerwald · IEEE Transactions on Power Electronics | Apr 1988 | 1,965 |
| 3 | A NEW MODEL FOR SINGLE-LAYER DRYING Adnan Mi̇di̇lli̇, H. Kucuk, Ziya Yapar · Drying Technology | 23 Jul 2002 | 1,557 |
| 4 | Generalized Techniques of Harmonic Elimination and Voltage Control in Thyristor Inverters: Part I--Harmonic Elimination Hasmukh S. Patel, Richard Gibson Hoft · IEEE Transactions on Industry Applications | May 1973 | 1,227 |
| 5 | Evolution and Modern Approaches for Thermal Analysis of Electrical Machines Aldo Boglietti, Andrea Cavagnino, David Alan Staton et al. · IEEE Transactions on Industrial Electronics | Mar 2009 | 989 |
| 6 | Induction Heating Technology and Its Applications: Past Developments, Current Technology, and Future Challenges Óscar Lucía, Pascal Maussion, Enrique J. Dede et al. · IEEE Transactions on Industrial Electronics | 11 Sep 2013 | 877 |
| 7 | Lumped parameter thermal model for electrical machines of TEFC design Phil H. Mellor, Donald W. Roberts, David R. Turner · IEE Proceedings B Electric Power Applications | 1991 | 876 |
| 8 | Control in Power Electronics: selected problems Marian P. Kaźmierkowski, Rugmini R Krishnan, Frede Blaabjerg | 2002 | 874 |
| 9 | Variable-speed switched reluctance motors Peter J. Lawrenson, J.M. Stephenson, N.N. Fulton et al. · IEE Proceedings B Electric Power Applications | 1980 | 780 |
| 10 | Performance improvements of interleaving VRMs with coupling inductors Pit-Leong Wong, Peng Xu, Yang Pu et al. · IEEE Transactions on Power Electronics | Jul 2001 | 685 |
| 11 | Direct power control of PWM converter without power source voltage sensors Toshihiko Noguchi, H. Tomiki, Seiji Kondo et al. | 23 Dec 2002 | 669 |
| 12 | Solving the More Difficult Aspects of Electric Motor Thermal Analysis in Small and Medium Size Industrial Induction Motors David Alan Staton, Aldo Boglietti, Andrea Cavagnino · IEEE Transactions on Energy Conversion | 16 Aug 2005 | 635 |
| 13 | Convection Heat Transfer and Flow Calculations Suitable for Electric Machines Thermal Models David Alan Staton, Andrea Cavagnino · IEEE Transactions on Industrial Electronics | 30 Sep 2008 | 530 |
| 14 | Improved Core-Loss Calculation for Magnetic Components Employed in Power Electronic Systems J. Mühlethaler, J. Biela, Johann Walter Kolar et al. · IEEE Transactions on Power Electronics | 21 Jul 2011 | 527 |
| 15 | Advantages of switched reluctance motor applications to EV and HEV: design and control issues Khwaja M. Rahman, Babak Fahimi, Greeshma Suresh et al. · IEEE Transactions on Industry Applications | 2000 | 526 |
| 16 | Generic torque-maximizing design methodology of surface permanent-magnet vernier machine Thomas Anthony Lipo, Akio Toba · IEEE Transactions on Industry Applications | 2000 | 512 |
| 17 | New developments in IC voltage regulators R.J. Widlar · IEEE Journal of Solid-State Circuits | Feb 1971 | 508 |
| 18 | The response of a terminated two-wire transmission line excited by a nonuniform electromagnetic field C.D. Taylor, R. Satterwhite, Charles W. Harrison · IRE Transactions on Antennas and Propagation | Nov 1965 | 499 |
| 19 | CD133 Expression Defines a Tumor Initiating Cell Population in Primary Human Ovarian Cancer Michael D. Curley, Vanessa A. Therrien, Christine L. Cummings et al. · Stem Cells | 8 Oct 2009 | 451 |
| 20 | Solid-state power conversion: A Fourier analysis approach to generalized transformer synthesis A. Alesina, Marco Venturini · IEEE Transactions on Circuits and Systems | Apr 1981 | 448 |
| 21 | Core Losses Under the DC Bias Condition Based on Steinmetz Parameters J. Mühlethaler, J. Biela, Johann Walter Kolar et al. · IEEE Transactions on Power Electronics | 6 Jul 2011 | 423 |
| 22 | A General Approach to Sampled-Data Modeling for Power Electronic Circuits George C. Verghese, Malik E. Elbuluk, John G. Kassakian · IEEE Transactions on Power Electronics | Apr 1986 | 412 |
| 23 | Multipulse AC–DC Converters for Improving Power Quality: A Review Bhim Singh, Sanjay Gairola, Brij N. Singh et al. · IEEE Transactions on Power Electronics | 2008 | 410 |
| 24 | Optimal Design and Tradeoff Analysis of Planar Transformer in High-Power DC–DC Converters Ziwei Ouyang, Ole C. Thomsen, Michael A. E. Andersen · IEEE Transactions on Industrial Electronics | 24 Mar 2010 | 393 |
| 25 | Adaptive Quadrature—Revisited Walter Gander, Walter Gautschi · BIT Numerical Mathematics | Mar 2000 | 389 |
| 26 | Numerical and Machine Solutions of Transient Heat-Conduction Problems Involving Melting or Freezing: Part I—Method of Analysis and Sample Solutions William Donald Murray, Fred Landis · ASME Journal of Heat and Mass Transfer | May 1959 | 387 |
| 27 | The Use of Harmonic Distortion to Increase the Output Voltage of a Three-Phase PWM Inverter John A. Houldsworth, Duncan A Grant · IEEE Transactions on Industry Applications | Sep 1984 | 385 |
| 28 | A simplified thermal model for variable-speed self-cooled industrial induction motor Aldo Boglietti, Andrea Cavagnino, Mario Lazzari et al. · IEEE Transactions on Industry Applications | Jul 2003 | 382 |
| 29 | Power driver topologies and control schemes for LEDs Heinz van der Broeck, Georg Sauerlander, M. Wendt · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition | Feb 2007 | 371 |
| 30 | Determination of Critical Parameters in Electrical Machine Thermal Models Aldo Boglietti, Andrea Cavagnino, David Alan Staton · IEEE Transactions on Industry Applications | 2008 | 369 |
| 31 | Modeling and damping of high-frequency leakage currents in PWM inverter-fed AC motor drive systems Satoshi Ogasawara, Hirofumi Akagi · IEEE Transactions on Industry Applications | 1996 | 362 |
| 32 | Switched reluctance generators and their control D.A. Torrey · IEEE Transactions on Industrial Electronics | 2002 | 360 |
| 33 | Beyond Induction Motors—Technology Trends to Move Up Efficiency Anı́bal T. de Almeida, Fernando J. T. E. Ferreira, Baoming Ge · IEEE Transactions on Industry Applications | May 2014 | 351 |
| 34 | Analysis of self-excited induction generators S. Srinivasa Murthy, O.P. Malik, A.K. Tandon | Nov 1982 | 351 |
| 35 | Thermal Management on IGBT Power Electronic Devices and Modules Cheng Qian, Amir Mirza Gheitaghy, Jiajie Fan et al. · IEEE Access | 2018 | 346 |
| 36 | Modeling the heating uniformity contributed by a rotating turntable in microwave ovens S.S.R. Geedipalli, Vineet Rakesh, Ashim Kumar Datta · Journal of Food Engineering | 6 Mar 2007 | 339 |
| 37 | Air-Gap Convection in Rotating Electrical Machines David A. Howey, Peter Childs, Andrew S. Holmes · IEEE Transactions on Industrial Electronics | 21 Dec 2010 | 333 |
| 38 | Rotor design optimization of synchronous reluctance machine T. Matsuo, Thomas Anthony Lipo · IEEE Transactions on Energy Conversion | Jun 1994 | 329 |
| 39 | Reactive Power Generation and Control by Thyristor Circuits Laszlo Gyugyi · IEEE Transactions on Industry Applications | Sep 1979 | 328 |
| 40 | Microwave material processing—a review S. Chandrasekaran, Ramanathan Srinivasan, Tanmay Basak · AIChE Journal | Sep 2011 | 327 |
| 41 | Multi-Objective Design Optimization of an IPMSM Based on Multilevel Strategy Xiaodong Sun, Zhou Shi, Gang Lei et al. · IEEE Transactions on Industrial Electronics | 15 Jan 2020 | 325 |
| 42 | Quantitative Comparison of Flux-Switching Permanent-Magnet Motors With Interior Permanent Magnet Motor for EV, HEV, and PHEV Applications Ruiwu Cao, Chris Chunting Mi, Ming Cheng · IEEE Transactions on Magnetics | 13 Mar 2012 | 321 |
| 43 | Modern Electrical Machine Design Optimization: Techniques, Trends, and Best Practices Gerd Bramerdorfer, Juan Antonio Tapia, Juha J. Pyrhonen et al. · IEEE Transactions on Industrial Electronics | 5 Feb 2018 | 320 |
| 44 | Recent Advances in Axial-Flux Permanent-Magnet Machine Technology Fabio Giulii Capponi, Giulio De Donato, Federico Caricchi · IEEE Transactions on Industry Applications | Nov 2012 | 317 |
| 45 | Multi-Objective Optimization Design of In-Wheel Switched Reluctance Motors in Electric Vehicles X.D. Xue, K.W.E. Cheng, T.W. Ng et al. · IEEE Transactions on Industrial Electronics | 10 Aug 2010 | 315 |
| 46 | Optimal design of switched reluctance motors T.J.E. Miller · IEEE Transactions on Industrial Electronics | 2002 | 311 |
| 47 | The heating of polymer composites by electromagnetic induction – A review Thomas M. Bayerl, Miro Duhovic, Peter Mitschang et al. · Composites Part A Applied Science and Manufacturing | 8 Nov 2013 | 311 |
| 48 | Three-Level LLC Series Resonant DC/DC Converter Yu Jiong Gu, Zhe‐Ming Lu, Lijun Hang et al. · IEEE Transactions on Power Electronics | Jul 2005 | 311 |
| 49 | Waveform Distortion and Correction Circuit for PWM Inverters with Switching Lag-Times Yoshihiro Murai, Tomofumi Watanabe, Harumitu Iwasaki · IEEE Transactions on Industry Applications | Sep 1987 | 308 |
| 50 | Power ultrasound and its applications: A state-of-the-art review Ye Yao, Yue Pan, Shiqing Liu · Ultrasonics Sonochemistry | 3 Nov 2019 | 307 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for a field when OpenAlex files it under one of the field's topics; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.