Most cited papers in Injection Molding Process and Properties
What are the most cited papers in Injection Molding Process and Properties?
The most cited paper in Injection Molding Process and Properties is "3D printing of ceramics: A review" (Zhangwei Chen, Ziyong Li, Junjie Li et al., 2018), with 2,129 citations. Next come "Correlation of dynamic and steady flow viscosities" (2,075) and "Mechanical characterization of bulk Sylgard 184 for microfluidics and microengineering" (1,506).
Showing 50 of 100 papers. Every paper with more than 356 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | 3D printing of ceramics: A review Zhangwei Chen, Ziyong Li, Junjie Li et al. · Journal of the European Ceramic Society | 6 Nov 2018 | 2,129 |
| 2 | Correlation of dynamic and steady flow viscosities W. P. Cox, E. H. Merz · Journal of Polymer Science | Apr 1958 | 2,075 |
| 3 | Mechanical characterization of bulk Sylgard 184 for microfluidics and microengineering Ian D. Johnston, Daniel K. McCluskey, Christabel Tan et al. · Journal of Micromechanics and Microengineering | 28 Feb 2014 | 1,506 |
| 4 | Design optimization of cutting parameters for turning operations based on the Taguchi method Weihong Yang, Y.S. Tarng · Journal of Materials Processing Technology | Dec 1998 | 1,302 |
| 5 | A review on 3D micro-additive manufacturing technologies Mohammad Vaezi, Hermann Seitz, Shoufeng Yang · The International Journal of Advanced Manufacturing Technology | 24 Nov 2012 | 1,289 |
| 6 | Effect of processing conditions on the bonding quality of FDM polymer filaments Q. Sun, Ghaus M. Rizvi, Céline T. Bellehumeur et al. · Rapid Prototyping Journal | 28 Mar 2008 | 1,275 |
| 7 | Improving the Density of Jammed Disordered Packings Using Ellipsoids Aleksandar Donev, Ibrahim Cisse, David Sachs et al. · Science | 12 Feb 2004 | 1,265 |
| 8 | Polybenzoxazines—New high performance thermosetting resins: Synthesis and properties Narendra Nath Ghosh, Barış Kışkan, Yusuf Yağcı · Progress in Polymer Science | 3 Aug 2007 | 1,195 |
| 9 | Powder Processing Science and Technology for Increased Reliability Fred F. Lange · Journal of the American Ceramic Society | 1989 | 1,191 |
| 10 | Compression Strength of Porous Sintered Alumina and Zirconia Eugene Ryshkewitch · Journal of the American Ceramic Society | Feb 1953 | 1,152 |
| 11 | A review of polymer dissolution Beth A. Miller-Chou, Jack L. Koenig · Progress in Polymer Science | 22 Jul 2003 | 1,117 |
| 12 | Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges Amir Mostafaei, Amy Elliott, John E. Barnes et al. · Progress in Materials Science | 15 Jun 2020 | 1,091 |
| 13 | Cemented carbide microstructures: a review Jose Luis Garcia, Verónica Collado Ciprés, Andreas Blomqvist et al. · International Journal of Refractory Metals and Hard Materials | 10 Dec 2018 | 1,059 |
| 14 | Densification during Sintering in the Presence of a Liquid Phase. I. Theory WILLIAM DAVID KINGERY · Journal of Applied Physics | Mar 1959 | 1,024 |
| 15 | FDM process parameters influence over the mechanical properties of polymer specimens: A review Diana Mihaela Popescu, Aurelian Zapciu, Cătălin Gheorghe Amza et al. · Polymer Testing | 17 May 2018 | 1,016 |
| 16 | Processing techniques for functionally graded materials Bernd Kieback, Achim Neubrand, Hermann Riedel · Materials Science and Engineering A | 12 Sep 2003 | 978 |
| 17 | Sustainable manufacturing: Modeling and optimization challenges at the product, process and system levels Anshu Dhar Jayal, Fazleena Badurdeen, O. W. Dillon et al. · CIRP journal of manufacturing science and technology | 2010 | 944 |
| 18 | An approach to micro-macro modeling of heterogeneous materials Varvara G. Kouznetsova, W.A.M. Brekelmans, Frank Frank Baaijens · Computational Mechanics | 29 Jan 2001 | 916 |
| 19 | Laser sintering of polyamides and other polymers Ruth Goodridge, Christopher J. Tuck, Richard Hague · Progress in Materials Science | 22 May 2011 | 839 |
| 20 | Fundamental aspects of hot isostatic pressing: An overview Helen Valerie Atkinson, Sean Davies · Metallurgical and Materials Transactions A | Dec 2000 | 797 |
| 21 | 3D printing – A review of processes, materials and applications in industry 4.0 Anketa Jandyal, Ikshita Chaturvedi, Ishika Wazir et al. · Sustainable Operations and Computers | 12 Oct 2021 | 740 |
| 22 | The engineering aspects of automated prepreg layup: History, present and future D. Lukaszewicz, Carwyn Ward, Kevin D. Potter · Composites Part B Engineering | 17 Dec 2011 | 728 |
| 23 | Short fiber reinforced composites for fused deposition modeling Zhong Weihong, Fan Li, Zuoguang Zhang et al. · Materials Science and Engineering A | Mar 2001 | 721 |
| 24 | Theory of sintering: from discrete to continuum Eugene A. Olevsky · Materials Science and Engineering R Reports | 30 Jun 1998 | 719 |
| 25 | Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives Joamin González-Gutiérrez, Santiago Cano, Stephan Schuschnigg et al. · Materials | 18 May 2018 | 714 |
| 26 | Injection Molding of Metals and Ceramics Sundar V. Atre, Timothy J. Weaver, Randall M. German · SAE technical papers on CD-ROM/SAE technical paper series | 29 Sep 1998 | 706 |
| 27 | Artificial intelligence and machine learning in design of mechanical materials Kai Guo, Zhenze Yang, Chi‐Hua Yu et al. · Materials Horizons | 17 Dec 2020 | 697 |
| 28 | A Review of CO2 Applications in the Processing of Polymers David Lane Tomasko, Hongbo Li, Dehua Liu et al. · Industrial & Engineering Chemistry Research | 6 Sep 2003 | 680 |
| 29 | Process-Induced Stress and Deformation in Thick-Section Thermoset Composite Laminates Travis A. Bogetti, John W. Gillespie · Journal of Composite Materials | Mar 1992 | 669 |
| 30 | Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material Chuncheng Yang, Xiaoyong Tian, Dichen Li et al. · Journal of Materials Processing Technology | 2 May 2017 | 664 |
| 31 | Supercritical carbon dioxide as a green solvent for processing polymer melts: Processing aspects and applications Sameer P. Nalawade, Francesco Picchioni, L. P. B. M. Janssen · Progress in Polymer Science | 18 Oct 2005 | 661 |
| 32 | Thermoset characterization for moldability analysis Musa R. Kamal · Polymer Engineering and Science | Mar 1974 | 653 |
| 33 | Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts Adriaan Bernardus Spierings, Nikolaus Herres, Gideon N. Levy · Rapid Prototyping Journal | 26 Apr 2011 | 616 |
| 34 | Manufacturing Aspects of Advanced Polymer Composites for Automotive Applications Klaus FRIEDRICH, Abdulhakim A. Almajid · Applied Composite Materials | 9 Feb 2012 | 608 |
| 35 | The yield stress myth? Howard A. Barnes, KENNETH A. WALTERS · Rheologica Acta | Jul 1985 | 607 |
| 36 | Toughening mechanisms in elastomer-modified epoxies Raymond A. Pearson, Albert F. Yee · Journal of Materials Science | Jul 1986 | 598 |
| 37 | A first report on sintering diagrams Michael Farries Ashby · Acta Metallurgica | Mar 1974 | 598 |
| 38 | Experimental investigation and empirical modelling of FDM process for compressive strength improvement Anoop Kumar Sood, Rajkumar Ohdar, Siba Sankar Mahapatra · Journal of Advanced Research | 19 Jun 2011 | 579 |
| 39 | Selective laser sintering (SLS) 3D printing of medicines Fabrizio Fina, Álvaro Goyanes, Simon Gaisford et al. · International Journal of Pharmaceutics | 28 Jun 2017 | 576 |
| 40 | Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques Michael Dawoud, Iman M. Taha, Samy Jimmy Ebeid · Journal of Manufacturing Processes | 10 Dec 2015 | 562 |
| 41 | Curing of Epoxy Matrix Composites Alfred C. Loos, George Ś. Springer · Journal of Composite Materials | Mar 1983 | 556 |
| 42 | Emergence of 3D Printed Dosage Forms: Opportunities and Challenges Mohamed Albed Alhnan, Tochukwu C. Okwuosa, Muzna Sadia et al. · Pharmaceutical Research | 18 May 2016 | 555 |
| 43 | Synthesis and Characterization of Novel Benzoxazine Monomers Containing Allyl Groups and Their High Performance Thermosets Tarek Agag, Tsutomu Takeichi · Macromolecules | 12 Jul 2003 | 554 |
| 44 | A review of optimization techniques in metal cutting processes Indrajit Mukherjee, Pradip Kumar Ray · Computers & Industrial Engineering | 4 Feb 2006 | 550 |
| 45 | Development of new metal/polymer materials for rapid tooling using Fused deposition modelling Syed Hasan Masood, Wei Song · Materials & Design (1980-2015) | 20 Mar 2004 | 543 |
| 46 | Printability of alloys for additive manufacturing Tuhin K Mukherjee, James S. Zuback, Amitava De et al. · Scientific Reports | 22 Jan 2016 | 529 |
| 47 | A Study on the Volumetric Expansion of Benzoxazine-Based Phenolic Resin Hatsuo Ishida, Hong Yee Low · Macromolecules | Feb 1997 | 523 |
| 48 | Additive Manufacturing of Metallic Materials: A Review Yi Zhang, Linmin Wu, Xingye Guo et al. · Journal of Materials Engineering and Performance | 24 May 2017 | 521 |
| 49 | Microinjection molding of thermoplastic polymers: a review Julien Giboz, Thierry Copponnex, Patrice Mélé · Journal of Micromechanics and Microengineering | 15 May 2007 | 515 |
| 50 | 3D printing of tablets containing multiple drugs with defined release profiles Shaban A. Khaled, J. Burley, Morgan R. Alexander et al. · International Journal of Pharmaceutics | 31 Jul 2015 | 507 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for a field when OpenAlex files it under one of the field's topics; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.