Question 1

Which countries lead Mechanical and Thermal Properties Analysis research?

Accepted Answer

By volume, Russia and Poland publish the most (248 and 237 works in 2022-now).

Question 2

Which institutions lead Mechanical and Thermal Properties Analysis research?

Accepted Answer

By volume in 2022-now, Technical University of Košice publishes the most Mechanical and Thermal Properties Analysis research, followed by University of Žilina and Silesian University of Technology.

Question 3

Who are the leading researchers in Mechanical and Thermal Properties Analysis?

Accepted Answer

The most-cited researchers publishing on Mechanical and Thermal Properties Analysis include A. Olszewski.

Question 4

Where is Mechanical and Thermal Properties Analysis research done?

Accepted Answer

The largest centres of Mechanical and Thermal Properties Analysis research in 2022-now are Moscow (Russia), Warsaw (Poland), Košice (Slovakia) and Žilina (Slovakia). Among places with at least 20 works in it, it is an unusually large share of all research in Žilina, Košice and Gliwice.

Question 5

Where is the best place to study Mechanical and Thermal Properties Analysis?

Accepted Answer

Among universities, judged by research, Poznań University of Technology, Technical University of Košice and University of Žilina score highest, combining citation excellence, specialisation, size, growth and international reach. Research strength is one signal when choosing where to study; it does not measure teaching.

Question 6

Is Mechanical and Thermal Properties Analysis research growing?

Accepted Answer

Output in 2022-2025 was 33% lower than in 2018-2021, peaking in 2014.

Question 7

What are the most cited papers in Mechanical and Thermal Properties Analysis?

Accepted Answer

The most cited paper in Mechanical and Thermal Properties Analysis is "Deformation and Fracture Mechanics of Engineering Materials" (Richard W. Hertzberg, Frank E. Hauser, 1977), with 3,670 citations. Next come "Micromechanics: Overall Properties of Heterogeneous Materials" (2,215) and "Computer Methods in Applied Mechanics and Engineering" (2,082).