Most cited papers in Surface Treatment and Coatings

Surface Treatment and Coatings

What are the most cited papers in Surface Treatment and Coatings?

The most cited paper in Surface Treatment and Coatings is "Plasma electrolysis for surface engineering" (Aleksey L. Yerokhin, Xueyuan Nie, Adrian Leyland et al., 1999), with 2,972 citations. Next come "Plasma sprayed coatings of hydroxylapatite" (1,156) and "Influence of temperature on the products from the flash pyrolysis of biomass" (397).

Published TypeAccessCitations

Showing 50 of 100 papers. Every paper with more than 96 citations is listed.

Most cited papers, sortable by citations and release date
#	Paper
1	Plasma electrolysis for surface engineering Aleksey L. Yerokhin, Xueyuan Nie, Adrian Leyland et al. · Surface and Coatings Technology	Dec 1999	2,972
2	Plasma sprayed coatings of hydroxylapatite K. de Groot, R. G. T. Geesink, Carsten Klein et al. · Journal of Biomedical Materials Research	Dec 1987	1,156
3	Influence of temperature on the products from the flash pyrolysis of biomass Patrick A. Horne, Paul T. Williams · Fuel	Jul 1996	397
4	Fault diagnosis of single-phase induction motor based on acoustic signals Adam Głowacz · Mechanical Systems and Signal Processing	2 Aug 2018	353
5	On the thermodynamics and kinetics of electropulsing induced dissolution of β-Mg17Al12 phase in an aged Mg–9Al–1Zn alloy Yanbin Jiang, Guoyi Tang, C.H. Shek et al. · Acta Materialia	28 Jul 2009	278
6	Setting Reactions and Compressive Strengths of Calcium Phosphate Cements Yasumasa Fukase, Edward David Eanes, S. Takagp et al. · Journal of Dental Research	Dec 1990	272
7	An adaptive neuro-fuzzy inference system (ANFIS) model for wire-EDM Ulaş Çaydaş, Ahmet Hasçalık, Sami Ekici · Expert Systems with Applications	18 Jul 2008	269
8	Nanostructure formation on the surface of railway tracks Witold Łojkowski, M. Djahanbakhsh, G. Bürkle et al. · Materials Science and Engineering A	May 2001	266
9	Induction plasma sprayed nano hydroxyapatite coatings on titanium for orthopaedic and dental implants Mangal Roy, Amit Kumar Bandyopadhyay, Susmita Bose · Surface and Coatings Technology Open access	28 Oct 2010	260
10	Phase formation in ceramic coatings during plasma electrolytic oxidation of aluminium alloys Aleksey L. Yerokhin, Victor V. Lyubimov, Roman V. Ashitkov · Ceramics International	1998	242
11	Titanium Alloys: Russian Aircraft and Aerospace Applications Valentin N. Moiseyev · International Linear Collider	13 Jul 2005	241
12	Diagnosis of the three-phase induction motor using thermal imaging Adam Głowacz, Zygfryd Głowacz · Infrared Physics & Technology	9 Dec 2016	239
13	Application of Aluminum and Aluminum Alloys in Engineering Blaža Stojаnović, Milan Bukvić, Igor J. Epler · Applied Engineering Letters Journal of Engineering and Applied Sciences Open access	2018	236
14	Improvement in Isometric Strength of the Quadriceps Femoris Muscle After Training with Electrical Stimulation David M. Selkowitz · Physical Therapy	Feb 1985	224
15	Joint replacement components made of hot-forged and surface-treated Ti-6Al-7Nb alloy M Semlitsch, Heinz P Weber, Robert Streicher et al. · Biomaterials	1992	221
16	Workpiece surface modification using electrical discharge machining Jorge Simão, H.G Lee, D.K. Aspinwall et al. · International Journal of Machine Tools and Manufacture	2 Dec 2002	212
17	Rate of Convergence of Some Neural Network Operators to the Unit-Univariate Case George A. Anastassiou · Journal of Mathematical Analysis and Applications Open access	Aug 1997	202
18	Production of natural and synthesized aluminum-based composite materials with the aid of ultrasonic (cavitation) treatment of the melt Georgy I. Eskin, Dmitry G. Eskin · Ultrasonics Sonochemistry	4 Mar 2003	202
19	Microstructure and Corrosion Properties of AlCoCrFeNi High Entropy Alloy Coatings Deposited on AISI 1045 Steel by the Electrospark Process Q. H. Li, T.M. Yue, Z.N. Guo et al. · Metallurgical and Materials Transactions A	7 Dec 2012	201
20	Experimental investigations in powder mixed electric discharge machining of Ti–35Nb–7Ta–5Zrβ-titanium alloy Chander Prakash, Harmesh Kumar Kansal, B. Singh Pabla et al. · Materials and Manufacturing Processes	22 Jun 2016	198
21	Pulsed wire discharge for nanosize powder synthesis Weihua Jiang, Kiyoshi Yatsui · IEEE Transactions on Plasma Science	1998	191
22	Bioactive calcium phosphate coatings prepared by electrodeposition M. Shirkhanzadeh · Journal of Materials Science Letters	1991	190
23	Assisting Electrode Method for Machining Insulating Ceramics Naotake MOHRI, Yasushi FUKUZAWA, Takayuki TANI et al. · CIRP Annals	1996	189
24	In Vitro Assessment of the Quality of Stored Platelet Concentrates Scott Murphy, Paolo Rebulla, Francesco Bertolini et al. · Transfusion Medicine Reviews Open access	1994	185
25	Tool wear characteristics in turning of titanium alloy Ti-6246 A. Jawaid, C.H. Che-Haron, Asma Binti Abdullah · Journal of Materials Processing Technology	Aug 1999	181
26	Hydroxyapatite coatings: a comparative study between plasma-spray and pulsed laser deposition techniques F. J. García-Sanz, Michael B. Mayor, Jorge Luis Arias et al. · Journal of Materials Science Materials in Medicine	Dec 1997	180
27	EB-PVD Thermal Barrier Coatings for Aeroengines and Gas Turbines M. Peters, Christoph Leyens, Uwe Schulz et al. · Advanced Engineering Materials	Apr 2001	177
28	The effect of roughness and pre-heating of the substrate on the morphology of aluminium coatings deposited by thermal spraying Ramón Sigifredo Cortés Paredes, Sandro Campos Amico, Ana Sofia D'Oliveira · Surface and Coatings Technology	9 Sep 2005	175
29	Wear resistance of a laser surface alloyed Ti–6Al–4V alloy Pei‐Cheng Jiang, Xiaofan He, X.X. Li et al. · Surface and Coatings Technology	Aug 2000	175
30	Listening to the sound of materials: Acoustic emission for the analysis of material behaviour Martine Wevers · NDT & E International	Apr 1997	172
31	Application of thermal spraying in the automobile industry Barbezat Gérard · Surface and Coatings Technology	7 Jun 2006	171
32	Wear behaviour of laser clad NiCrBSi coating E. Fernández, Modesto Cadenas, Regina Stasser de Gonzalez et al. · Wear Open access	5 Jun 2005	167
33	PROPERTIES OF A FATTY ACID FORMING ORGANISM ISOLATED FROM THE RUMEN OF SHEEP S. R. Elsden, B. E. Volcani, Frances M. C. Gilchrist et al. · Journal of Bacteriology Open access	Nov 1956	164
34	Advanced thermal spray technology and coating for lightweight engine blocks for the automotive industry Gérard Barbezat · Surface and Coatings Technology	29 Sep 2005	160
35	Tool condition monitoring using artificial intelligence methods Marek Balazinski, E. Czogała, Krzysztof Jemielniak et al. · Engineering Applications of Artificial Intelligence	Feb 2002	156
36	Metal Surface Modification by Electrical Discharge Machining with Composite Electrode Naotake MOHRI, Nagao SAITO, Yoshiki Tsunekawa et al. · CIRP Annals	1993	156
37	Strength enhancement of the welded structures by ultrasonic peening Amir Abdullah, Massoud Malaki, Ahmad Eskandari · Materials & Design (1980-2015)	3 Feb 2012	150
38	Morphology and microstructure of electrochemically deposited calcium phosphates in a modified simulated body fluid Seiji Ban, Shigeo Maruno · Biomaterials	Jul 1998	143
39	Thermoelastic behavior of the martensitic transformation in ß′ NiAl alloys Yin Kheng Au, C. Marvin Wayman · Scripta Metallurgica	Dec 1972	142
40	Surface Roughness Analysis in Machining of Titanium Alloy Sengottuvelu Ramesh, L. Karunamoorthy, Kayaroganam Palanikumar · Materials and Manufacturing Processes	8 Jan 2008	139
41	Comparative assessment of wiper and conventional ceramic tools on surface roughness in hard turning AISI 4140 steel Mohamed Elbah, Mohamed Athmane Yallese, Hamdi Aouici et al. · Measurement	26 Jun 2013	139
42	Mechanical clinching of ultra-high strength steel sheets and strength of joints Yohei Abe, Toru Kato, K. Mori et al. · Journal of Materials Processing Technology	14 Mar 2014	132
43	Corrosion resistance of Ti–6Al–4V alloy with nitride coatings in Ringer’s solution Iryna Pohrelyuk, V. М. Fedirko, О. В. Ткачук et al. · Corrosion Science	18 Oct 2012	130
44	Modeling of Cutting Parameters and Tool Geometry for Multi-Criteria Optimization of Surface Roughness and Vibration via Response Surface Methodology in Turning of AISI 5140 Steel Mustafa Kuntoğlu, Abdullah Aslan, Danil Yurievich Pimenov et al. · Materials Open access	23 Sep 2020	129
45	Performance Evaluation of Vegetable Oil-Based Nano-Cutting Fluids in Environmentally Friendly Machining of Inconel-800 Alloy Munish Kumar Gupta, Muhammad Jamil, Xiaojuan Wang et al. · Materials Open access	30 Aug 2019	129
46	Laser cladding of nanoparticle TiC ceramic powder: Effects of process parameters on the quality characteristics of the coatings and its prediction model Tao Chen, Weining Wu, Wenpeng Li et al. · Optics & Laser Technology	6 Apr 2019	128
47	Surface Modification of Ti-6Al-4V Alloy by Electrical Discharge Coating Process Using Partially Sintered Ti-Nb Electrode Chander Prakash, Sunpreet Singh, Catalin Iulian Pruncu et al. · Materials Open access	27 Mar 2019	128
48	Powder mixed-EDM for potential biomedical applications: A critical review Md Al-Amin, Ahmad Majdi Abdul Rani, Abdul Azeez Abdu Aliyu et al. · Materials and Manufacturing Processes	20 Jul 2020	125
49	Diagnosis of stator faults of the single-phase induction motor using acoustic signals Adam Głowacz, Zygfryd Głowacz · Applied Acoustics	27 Oct 2016	125
50	Calculation of the parameters of the Lennard-Jones potential for pairs of identical atoms based on the properties of solid substances В. П. Филиппова, С. А. Кунавин, M S Pugachev · Inorganic Materials Applied Research	2015	125

Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for a field when OpenAlex files it under one of the field's topics; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.