Most cited papers in Turbomachinery Performance and Optimization
What are the most cited papers in Turbomachinery Performance and Optimization?
The most cited paper in Turbomachinery Performance and Optimization is "The 1993 IGTI Scholar Lecture: Loss Mechanisms in Turbomachines" (J. D. Denton, 1993), with 1,646 citations. Next come "A Correlation-Based Transition Model Using Local Variables—Part I: Model Formulation" (1,488) and "Axial Flow Compressor Noise Studies" (1,145).
Showing 50 of 100 papers. Every paper with more than 262 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | The 1993 IGTI Scholar Lecture: Loss Mechanisms in Turbomachines J. D. Denton · Journal of Turbomachinery | Oct 1993 | 1,646 |
| 2 | A Correlation-Based Transition Model Using Local Variables—Part I: Model Formulation Florian R. Menter, Robin Langtry, S. R. Likki et al. · Journal of Turbomachinery | Mar 2004 | 1,488 |
| 3 | Axial Flow Compressor Noise Studies John M. Tyler, THOMAS G. SOFRIN · SAE technical papers on CD-ROM/SAE technical paper series | 1962 | 1,145 |
| 4 | The 1991 IGTI Scholar Lecture: The Role of Laminar-Turbulent Transition in Gas Turbine Engines Robert Edward Mayle · Journal of Turbomachinery | Oct 1991 | 1,007 |
| 5 | The calculation of low-Reynolds-number phenomena with a two-equation model of turbulence W.P. Jones, Brian E. Launder · International Journal of Heat and Mass Transfer | Jun 1973 | 976 |
| 6 | A Review of Shaped Hole Turbine Film-Cooling Technology Ronald S. Bunker · ASME Journal of Heat and Mass Transfer | 30 Mar 2005 | 910 |
| 7 | A Theory of Post-Stall Transients in Axial Compression Systems: Part I—Development of Equations Franklin K. Moore, E. M. Greitzer · Journal of Engineering for Gas Turbines and Power | 1986 | 865 |
| 8 | Surge and Rotating Stall in Axial Flow Compressors—Part I: Theoretical Compression System Model E. M. Greitzer · Journal of Engineering for Power | Apr 1976 | 861 |
| 9 | Gas Turbine Film Cooling David G. Bogard, Karen A. Thole · Journal of Propulsion and Power | Mar 2006 | 837 |
| 10 | Development of a Common Research Model for Applied CFD Validation Studies John Vassberg, Mark A. DeHaan, Melissa B. Rivers et al. · 26th AIAA Applied Aerodynamics Conference | 14 Jun 2008 | 805 |
| 11 | Fully Developed Flow and Heat Transfer in Ducts Having Streamwise-Periodic Variations of Cross-Sectional Area Suhas V. Patankar, C. H. Liu, E. M. Sparrow · ASME Journal of Heat and Mass Transfer | May 1977 | 798 |
| 12 | Prediction and control of combustion instabilities in real engines Thierry J. Poinsot · Proceedings of the Combustion Institute | 28 Jun 2016 | 786 |
| 13 | Computation of Unsteady Nonlinear Flows in Cascades Using a Harmonic Balance Technique Kenneth C. Hall, Jeffrey Thomas, W. Scott Clark · AIAA Journal | May 2002 | 729 |
| 14 | Transition Modelling for General Purpose CFD Codes Florian R. Menter, Robin Langtry, Stefan Völker · Flow Turbulence and Combustion | 17 Aug 2006 | 694 |
| 15 | Film-Cooling Effectiveness Downstream of a Single Row of Holes With Variable Density Ratio Anubhav Sinha, David G. Bogard, Michael Edward Crawford · Journal of Turbomachinery | Jul 1991 | 653 |
| 16 | A Three-Equation Eddy-Viscosity Model for Reynolds-Averaged Navier–Stokes Simulations of Transitional Flow D. Keith Walters, Davor Čokljat · Journal of Fluids Engineering | 24 Oct 2008 | 604 |
| 17 | Film Cooling R. J. Goldstein · Advances in heat transfer | 1971 | 569 |
| 18 | Developing heat transfer in rectangular channels with rib turbulators J. C. Han, Jongchan Park · International Journal of Heat and Mass Transfer | 1988 | 542 |
| 19 | A Correlation-Based Transition Model Using Local Variables—Part II: Test Cases and Industrial Applications Robin Langtry, Florian R. Menter, S. R. Likki et al. · Journal of Turbomachinery | Mar 2004 | 532 |
| 20 | Predictions of vortex-lift characteristics by a leading-edge suctionanalogy Edward C Polhamus · Journal of Aircraft | Apr 1971 | 531 |
| 21 | Criteria for Spike Initiated Rotating Stall Huu Duc Vo, Choon Sooi Tan, E. M. Greitzer · Journal of Turbomachinery | 2008 | 511 |
| 22 | Stall Inception in Axial Flow Compressors I. J. Day · Journal of Turbomachinery | 1993 | 501 |
| 23 | Loss Mechanisms in Turbomachines J. D. Denton | 24 May 1993 | 458 |
| 24 | Stall, Surge, and 75 Years of Research I. J. Day · Journal of Turbomachinery | 31 Aug 2015 | 452 |
| 25 | Compressor Surge and Stall Propagation Howard W. Emmons, Carl E. Pearson, Howard P. Grant · Transactions of the American Society of Mechanical Engineers | May 1955 | 449 |
| 26 | Recent Progress in the Understanding of Basic Aspects of Secondary Flows in Turbine Blade Passages Claus H. Sieverding · Journal of Engineering for Gas Turbines and Power | Apr 1985 | 434 |
| 27 | Comparison of Heat Transfer Augmentation Techniques Phil Ligrani, M. M. Oliveira, T. Blaskovich · AIAA Journal | Mar 2003 | 424 |
| 28 | Heat Transfer and Friction in Channels With Two Opposite Rib-Roughened Walls J. C. Han · ASME Journal of Heat and Mass Transfer | Nov 1984 | 420 |
| 29 | Flow Visualization in a Linear Turbine Cascade of High Performance Turbine Blades H. P. Wang, Steven J. Olson, R. J. Goldstein et al. · Journal of Turbomachinery | 1997 | 419 |
| 30 | Modeling and Analysis of Mistuned Bladed Disk Vibration: Current Status and Emerging Directions Matthew P. Castanier, Christophe Pierre · Journal of Propulsion and Power | Mar 2006 | 411 |
| 31 | Simulation comparison of wake mitigation control strategies for a two-turbine case Paul A Fleming, Pieter M. O. Gebraad, Sang Lee et al. · Wind Energy | 16 Oct 2014 | 397 |
| 32 | Heat Transfer and Friction Characteristics in Rectangular Channels With Rib Turbulators J. C. Han · ASME Journal of Heat and Mass Transfer | May 1988 | 396 |
| 33 | Review of performance optimization techniques applied to wind turbines Adam Chehouri, Rafic Younès, Adrian Ilinca et al. · Applied Energy | 19 Jan 2015 | 394 |
| 34 | A Mechanism of Combustion Instability in Lean Premixed Gas Turbine Combustors Tim Lieuwen, Hector S. Torres, Craig B. Johnson et al. · Journal of Engineering for Gas Turbines and Power | 2 Apr 2000 | 393 |
| 35 | Experimental and Analytical Studies of a Model Helicopter Rotor in Hover Francis X. Caradonna, Chee Tung · NASA Technical Reports Server (NASA) | 1980 | 383 |
| 36 | Heat Transfer Enhancement in Channels With Turbulence Promoters J. C. Han, J. S. Park, Chengwang Lei · Journal of Engineering for Gas Turbines and Power | Jul 1985 | 381 |
| 37 | Multi-fidelity deep neural network surrogate model for aerodynamic shape optimization Xinshuai Zhang, Fangfang Xie, Tingwei Ji et al. · Computer Methods in Applied Mechanics and Engineering | 12 Nov 2020 | 378 |
| 38 | Loss Sources and Magnitudes in Axial-Flow Compressors C. C. Koch, Leroy H. Smith · Journal of Engineering for Power | Jul 1976 | 378 |
| 39 | Three-Dimensional Flow Within a Turbine Cascade Passage Lee S. Langston, Minor Nice, Richard Hooper · Journal of Engineering for Power | 1977 | 377 |
| 40 | A Theory of Post-Stall Transients in Axial Compression Systems: Part II—Application E. M. Greitzer, Franklin K. Moore · Journal of Engineering for Gas Turbines and Power | Apr 1986 | 376 |
| 41 | Transition Modeling for General CFD Applications in Aeronautics Robin Langtry, Florian R. Menter · 43rd AIAA Aerospace Sciences Meeting and Exhibit | 10 Jan 2005 | 373 |
| 42 | A Numerical Method for Solving the Equations of Compressible Viscous Flow Robert W. MacCormack · AIAA Journal | Sep 1982 | 369 |
| 43 | A Shrouded Wind Turbine Generating High Output Power with Wind-lens Technology Yuji Ohya, Takashi Karasudani · Energies | 31 Mar 2010 | 358 |
| 44 | Stall Inception in Axial Compressors N. M. McDougall, Nicholas A. Cumpsty, Thomas P. Hynes · Journal of Turbomachinery | 1990 | 352 |
| 45 | A Review of Surface Roughness Effects in Gas Turbines Jeffrey P. Bons · Journal of Turbomachinery | 11 Jan 2010 | 352 |
| 46 | Surge and Rotating Stall in Axial Flow Compressors—Part II: Experimental Results and Comparison With Theory E. M. Greitzer · Journal of Engineering for Power | Apr 1976 | 348 |
| 47 | A General Theory of Three-Dimensional Flow in Subsonic and Supersonic Turbomachines of Axial, Radial, and Mixed-Flow Types Chung-Hua Wu · Transactions of the American Society of Mechanical Engineers | Nov 1952 | 348 |
| 48 | Turbocharger Modeling for Automotive Control Applications Paul E. Moraal, Ilya V. Kolmanovsky · SAE technical papers on CD-ROM/SAE technical paper series | Mar 1999 | 335 |
| 49 | Rotating Instabilities in an Axial Compressor Originating From the Fluctuating Blade Tip Vortex Ronald Mailach, Ingolf Lehmann, Konrad Vogeler · Journal of Turbomachinery | Feb 2000 | 334 |
| 50 | Gas turbine coatings – An overview R. Rajendran · Engineering Failure Analysis | 31 Aug 2012 | 329 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for a field when OpenAlex files it under one of the field's topics; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.