Most cited papers in Welding Techniques and Residual Stresses
What are the most cited papers in Welding Techniques and Residual Stresses?
The most cited paper in Welding Techniques and Residual Stresses is "Additive manufacturing of metallic components – Process, structure and properties" (T. DebRoy, Huiliang Wei, James S. Zuback et al., 2017), with 8,766 citations. Next come "Initial reports of the deep sea drilling project" (3,996) and "A new finite element model for welding heat sources" (3,394).
Showing 50 of 100 papers. Every paper with more than 530 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Additive manufacturing of metallic components – Process, structure and properties T. DebRoy, Huiliang Wei, James S. Zuback et al. · Progress in Materials Science | 12 Oct 2017 | 8,766 |
| 2 | Initial reports of the deep sea drilling project Roland E. von Huene · Marine Geology | Feb 1971 | 3,996 |
| 3 | A new finite element model for welding heat sources JOHN A. GOLDAK, Aditya Chakravarti, Malcolm Bibby · Metallurgical Transactions B | Jun 1984 | 3,394 |
| 4 | A study of the microstructural evolution during selective laser melting of Ti–6Al–4V Lore Thijs, Frederik Verhaeghe, Tom Craeghs et al. · Acta Materialia | 17 Mar 2010 | 2,962 |
| 5 | Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones Saad A. Khairallah, Andrew T. Anderson, Alexander M. Rubenchik et al. · Acta Materialia | 23 Feb 2016 | 2,788 |
| 6 | Recent developments in stainless steels Kin Ho Lo, C.H. Shek, J.K.L. Lai · Materials Science and Engineering R Reports | 27 Apr 2009 | 2,296 |
| 7 | Recent advances in friction-stir welding – Process, weldment structure and properties Rakesh Nandan, T. DebRoy, H. K. D. H. Bhadeshia · Progress in Materials Science | 5 Jun 2008 | 2,105 |
| 8 | Residual stresses in selective laser sintering and selective laser melting Peter Mercelis, Jean‐Pierre Kruth · Rapid Prototyping Journal | Oct 2006 | 2,030 |
| 9 | Wire + Arc Additive Manufacturing Stewart Williams, Filomeno Martina, Adrian C. Addison et al. · Materials Science and Technology | 18 May 2015 | 1,865 |
| 10 | Wire-feed additive manufacturing of metal components: technologies, developments and future interests Donghong Ding, Zengxi Stephen Pan, Dominic Cuiuri et al. · The International Journal of Advanced Manufacturing Technology | 8 May 2015 | 1,651 |
| 11 | Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing Wayne E. King, Holly D. Barth, Victor M. Castillo et al. · Journal of Materials Processing Technology | 25 Jun 2014 | 1,630 |
| 12 | Residual stress. Part 1 – Measurement techniques Philip John Withers, H. K. D. H. Bhadeshia · Materials Science and Technology | Apr 2001 | 1,622 |
| 13 | A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement Bintao Wu, Zengxi Stephen Pan, Donghong Ding et al. · Journal of Manufacturing Processes | 7 Aug 2018 | 1,589 |
| 14 | The Point Defect Model for the Passive State Digby D. Macdonald · Journal of The Electrochemical Society | Dec 1992 | 1,570 |
| 15 | Kinetics of strain-induced martensitic nucleation G. B. Olson, Morris Cohen · Metallurgical Transactions A | Apr 1975 | 1,566 |
| 16 | Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing Sarah K. Everton, Matthias Hirsch, Petros Stravroulakis et al. · Materials & Design | 23 Jan 2016 | 1,466 |
| 17 | Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review Yihong Kok, Xipeng Tan, Pan Wang et al. · Materials & Design | 12 Nov 2017 | 1,458 |
| 18 | Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications David Svetlizky, Mitun Das, Baolong Zheng et al. · Materials Today | 2 Jun 2021 | 1,392 |
| 19 | Recent development in aluminium alloys for aerospace applications A. Heinz, A. Haszler, C. Keidel et al. · Materials Science and Engineering A | Mar 2000 | 1,299 |
| 20 | Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development Noriko Read, Wei Wang, Khamis Essa et al. · Materials & Design (1980-2015) | 7 Oct 2014 | 1,235 |
| 21 | A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends Jinliang Zhang, Bo Song, Qingsong Wei et al. · Journal of Material Science and Technology | 12 Sep 2018 | 1,217 |
| 22 | Non-Destructive Techniques Based on Eddy Current Testing Javier García-Martín, J. Gil, Ernesto Vázquez-Sánchez · Sensors | 28 Feb 2011 | 1,143 |
| 23 | Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging Ross Cunningham, Cang Zhao, Niranjan D. Parab et al. · Science | 21 Feb 2019 | 1,072 |
| 24 | Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review Niloofar Sanaei, Ali Fatemi · Progress in Materials Science | 18 Aug 2020 | 1,042 |
| 25 | Steels in additive manufacturing: A review of their microstructure and properties Priyanshu Bajaj, Avinash Hariharan, Achutha Ullal Kini et al. · Materials Science and Engineering A | 7 Nov 2019 | 1,033 |
| 26 | Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel Erica Liverani, Stefania Toschi, Lorella Ceschini et al. · Journal of Materials Processing Technology | 4 Jun 2017 | 1,004 |
| 27 | Residual stress. Part 2 – Nature and origins Philip John Withers, H. K. D. H. Bhadeshia · Materials Science and Technology | Apr 2001 | 974 |
| 28 | Hydrogen embrittlement in different materials: A review Sandeep Kumar Dwivedi, Manish Vishwakarma · International Journal of Hydrogen Energy | 25 Oct 2018 | 970 |
| 29 | Influence of defects on mechanical properties of Ti–6Al–4V components produced by selective laser melting and electron beam melting Haijun Gong, Khalid Rafi, Hengfeng Gu et al. · Materials & Design | 30 Jul 2015 | 949 |
| 30 | Methods of measuring residual stresses in components N.S. Rossini, Michele Dassisti, K.Y. Benyounis et al. · Materials & Design (1980-2015) | 11 Sep 2011 | 928 |
| 31 | Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels Juho Talonen, Hannu Hänninen · Acta Materialia | 28 Aug 2007 | 901 |
| 32 | Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting Jingjing Yang, Hanchen Yu, Jie Yin et al. · Materials & Design | 2 Jul 2016 | 895 |
| 33 | Grain structure control during metal 3D printing by high-intensity ultrasound Carmelo J. Todaro, Mark Alan Easton, Dong Qiu et al. · Nature Communications | 9 Jan 2020 | 848 |
| 34 | Invited review article: Strategies and processes for high quality wire arc additive manufacturing Chloe Cunningham, Joseph Michael Flynn, Alborz Shokrani et al. · Additive manufacturing | 30 Jun 2018 | 829 |
| 35 | Denudation of metal powder layers in laser powder bed fusion processes Manyalibo J. Matthews, Gabe M. Guss, Saad A. Khairallah et al. · Acta Materialia | 20 May 2016 | 819 |
| 36 | Process defects and in situ monitoring methods in metal powder bed fusion: a review Marco Grasso, Bianca Maria Colosimo · Measurement Science and Technology | 31 Jan 2017 | 816 |
| 37 | Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L K.M. Bertsch, Gabriel Meric de Bellefon, Bailey Kuehl et al. · Acta Materialia | 13 Aug 2020 | 815 |
| 38 | An improved prediction of residual stresses and distortion in additive manufacturing Tuhin K Mukherjee, Wei Zhang, T. DebRoy · Computational Materials Science | 20 Oct 2016 | 814 |
| 39 | Review: Friction stir welding tools R Rai, Amitava De, H. K. D. H. Bhadeshia et al. · Science and Technology of Welding & Joining | May 2011 | 812 |
| 40 | On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting Umberto Scipioni Bertoli, Alexander J. Wolfer, Manyalibo J. Matthews et al. · Materials & Design | 19 Oct 2016 | 795 |
| 41 | Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM) Tiago A. Rodrigues, Valdemar Rebelo Duarte, Rosa Maria Miranda et al. · Materials | 4 Apr 2019 | 776 |
| 42 | Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation Luke Parry, Ian Ashcroft, Ricky D. Wildman · Additive manufacturing | 18 May 2016 | 755 |
| 43 | Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V Fude Wang, Stewart Williams, Paul A. Colegrove et al. · Metallurgical and Materials Transactions A | 28 Sep 2012 | 742 |
| 44 | Residual stress and its role in failure Philip John Withers · Reports on Progress in Physics | 27 Nov 2007 | 735 |
| 45 | Techniques of modern structural geology Roddy V. Amenta · Earth-Science Reviews | May 1986 | 733 |
| 46 | Melt pool temperature and cooling rates in laser powder bed fusion Paul A. Hooper · Additive manufacturing | 19 May 2018 | 728 |
| 47 | Selective laser melting of stainless steel 316L with low porosity and high build rates Zhongji Sun, Xipeng Tan, Shu Beng Tor et al. · Materials & Design | 13 May 2016 | 719 |
| 48 | Balling behavior of stainless steel and nickel powder during selective laser melting process Ruidi Li, Jinhui Liu, Yusheng Shi et al. · The International Journal of Advanced Manufacturing Technology | 18 Aug 2011 | 719 |
| 49 | Dynamics of pore formation during laser powder bed fusion additive manufacturing Aiden A. Martin, Nicholas P. Calta, Saad A. Khairallah et al. · Nature Communications | 30 Apr 2019 | 713 |
| 50 | Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights Anton du Plessis, Ina Yadroitsava, Igor A. Yadroitsev · Materials & Design | 28 Nov 2019 | 712 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for a field when OpenAlex files it under one of the field's topics; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.