| 1 |
A global review of energy consumption, CO 2 emissions and policy in the residential sector (with an overview of the top ten CO 2 emitting countries)
Payam Nejat, Fatemeh Jomehzadeh, Mohammad Mahdi Taheri et al. · Renewable and Sustainable Energy Reviews
|
6 Dec 2014 |
1,967 |
| 2 |
A multi-material level set-based topology optimization of flexoelectric composites
Hamid Ghasemi, Harold S. Park, Timon Rabczuk · Computer Methods in Applied Mechanics and Engineering
Open access |
13 Dec 2017 |
313 |
| 3 |
Hydrothermal green synthesis of magnetic Fe3O4-carbon dots by lemon and grape fruit extracts and as a photoluminescence sensor for detecting of E. coli bacteria
Shahla Ahmadian-Fard-Fini, Masoud Salavati‐Niasari, Davood Ghanbari · Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy
Open access |
5 Jun 2018 |
303 |
| 4 |
Electro-spinning of cellulose acetate nanofibers/Fe/carbon dot as photoluminescence sensor for mercury (II) and lead (II) ions
Shahla Ahmadian-Fard-Fini, Davood Ghanbari, Omid Amiri et al. · Carbohydrate Polymers
|
3 Oct 2019 |
223 |
| 5 |
Magneto‐/ electro‐responsive polymers toward manufacturing, characterization, and biomedical/ soft robotic applications
Ebrahim Yarali, Mahdi Baniasadi, Ali Zolfagharian et al. · Applied Materials Today
Open access |
20 Dec 2021 |
212 |
| 6 |
Photoluminescence carbon dot as a sensor for detecting of Pseudomonas aeruginosa bacteria: Hydrothermal synthesis of magnetic hollow NiFe2O4-carbon dots nanocomposite material
Shahla Ahmadian-Fard-Fini, Davood Ghanbari, Masoud Salavati‐Niasari · Composites Part B Engineering
|
31 Dec 2018 |
201 |
| 7 |
Sensitivity and uncertainty analysis for flexoelectric nanostructures
Khader M. Hamdia, Hamid Ghasemi, Xiaoying Zhuang et al. · Computer Methods in Applied Mechanics and Engineering
|
28 Mar 2018 |
201 |
| 8 |
Investigation the photocatalytic activity of CoFe2O4/ZnO and CoFe2O4/ZnO/Ag nanocomposites for purification of dye pollutants
E. Ferdosi, Hamed Bahiraei, Davood Ghanbari · Separation and Purification Technology
|
19 Sep 2018 |
132 |
| 9 |
A novel ternary mixed matrix membrane containing glycerol-modified poly(ether-block-amide) (Pebax 1657)/copper nanoparticles for CO2 separation
Hamidreza Sanaeepur, Reyhane Ahmadi, Abtin Ebadi Amooghin et al. · Journal of Membrane Science
|
4 Dec 2018 |
125 |
| 10 |
A comparative study on the phenomenological and artificial neural network models to predict hot deformation behavior of AlCuMgPb alloy
H. R. Rezaei Ashtiani, P. Shahsavari · Journal of Alloys and Compounds
|
3 May 2016 |
118 |
| 11 |
Evaluation of potential sites in Iran to localize solar farms using a GIS-based Fermatean Fuzzy TOPSIS
Navid Hooshangi, Navid Mahdizadeh Gharakhanlou, Mir Reza Ghaffari Razin · Journal of Cleaner Production
|
10 Dec 2022 |
116 |
| 12 |
A novel magnetic MgFe2O4–MgTiO3 perovskite nanocomposite: Rapid photo-degradation of toxic dyes under visible irradiation
Atefeh Kiani, Gholamreza Nabiyouni, Shamin Masoumi et al. · Composites Part B Engineering
|
2 Jul 2019 |
112 |
| 13 |
Investigation of magnetic, mechanical and flame retardant properties of polymeric nanocomposites: Green synthesis of MgFe2O4 by lime and orange extracts
Marjan Joulaei, Kambiz Hedayati, Davood Ghanbari · Composites Part B Engineering
|
12 Aug 2019 |
111 |
| 14 |
Preparation of a new magnetic and photo-catalyst CoFe2O4–SrTiO3 perovskite nanocomposite for photo-degradation of toxic dyes under short time visible irradiation
Negar Eskandari, Gholamreza Nabiyouni, Shamin Masoumi et al. · Composites Part B Engineering
|
13 Aug 2019 |
111 |
| 15 |
Artificial Intelligence in the Management of Glioma: Era of Personalized Medicine
Houman Sotoudeh, Omid Shafaat, Joshua D. Bernstock et al. · Frontiers in Oncology
Open access |
14 Aug 2019 |
109 |
| 16 |
Thermoeconomic analysis of a novel combined cooling, heating and power system based on solar organic Rankine cycle and cascade refrigeration cycle
Zeinab Aghaziarati, Abolfazl Hajizadeh Aghdam · Renewable Energy
|
3 Nov 2020 |
100 |
| 17 |
Spatio-temporal simulation of the novel coronavirus (COVID-19) outbreak using the agent-based modeling approach (case study: Urmia, Iran)
Navid Mahdizadeh Gharakhanlou, Navid Hooshangi · Informatics in Medicine Unlocked
Open access |
2020 |
99 |
| 18 |
Comparison of transcritical CO2 refrigeration cycle with expander and throttling valve including/excluding internal heat exchanger: Exergy and energy points of view
O. Joneydi Shariatzadeh, Soroush Samareh Abolhassani, M. Rahmani et al. · Applied Thermal Engineering
|
4 Dec 2015 |
98 |
| 19 |
Pareto optimal design of a finned latent heat thermal energy storage unit using a novel hybrid technique
Hamid Maleki, Mehdi Ashrafi, Nastaran Zandy Ilghani et al. · Journal of Energy Storage
|
6 Oct 2021 |
95 |
| 20 |
A novel deep learning based method for the computational material design of flexoelectric nanostructures with topology optimization
Khader M. Hamdia, Hamid Ghasemi, Yakoub Bazi et al. · Finite Elements in Analysis and Design
|
20 Aug 2019 |
91 |
| 21 |
Modeling and optimization of a novel solar chimney cogeneration power plant combined with solid oxide electrolysis/fuel cell
O. Joneydi Shariatzadeh, Amir Hossein Refahi, Soroush Samareh Abolhassani et al. · Energy Conversion and Management
|
13 Aug 2015 |
91 |
| 22 |
A Remote Sensing and Machine Learning-Based Approach to Forecast the Onset of Harmful Algal Bloom
Moein Izadi, Mohamed Sultan, Racha El Kadiri et al. · Remote Sensing
Open access |
27 Sep 2021 |
87 |
| 23 |
Fork-shaped highly conductive pathways for maximum cooling in a heat generating piece
M.R. Hajmohammadi, V. Alizadeh Abianeh, M. Moezzinajafabadi et al. · Applied Thermal Engineering
|
13 Aug 2013 |
87 |
| 24 |
Integration of designing price-based demand response models into a stochastic bi-level scheduling of multiple energy carrier microgrids considering energy storage systems
Mehdi Nikzad, Abouzar Samimi · Applied Energy
|
13 Nov 2020 |
82 |
| 25 |
Reliability evaluation of a composite power system in the presence of renewable generations
Mohsen Firouzi, Abouzar Samimi, Abolfazl Salami · Reliability Engineering & System Safety
|
15 Feb 2022 |
74 |
| 26 |
Heat transfer improvement due to the imposition of non-uniform wall heating for in-tube laminar forced convection
M.R. Hajmohammadi, Sadegh Poozesh, M. Rahmani et al. · Applied Thermal Engineering
|
20 Aug 2013 |
74 |
| 27 |
Using deep learning to learn physics of conduction heat transfer
Mohammad Edalatifar, Mohammad Bagher Tavakoli, Mohammad Ghalambaz et al. · Journal of Thermal Analysis and Calorimetry
|
31 Jul 2020 |
73 |
| 28 |
Structural and optical characterization of ZnO and AZO thin films: the influence of post-annealing
Laya Dejam, Seyed Mohammad Elahi, Heydar Honarvar Nazari et al. · Journal of Materials Science Materials in Electronics
|
5 Oct 2015 |
72 |
| 29 |
Novel nanocomposites consisting of a semi-crystalline polyamide and Mg–Al LDH: Morphology, thermal properties and flame retardancy
Meisam Shabanian, Nemat Basaki, Hossein Ali Khonakdar et al. · Applied Clay Science
|
27 Jan 2014 |
69 |
| 30 |
Optimal design of unequal heat flux elements for optimized heat transfer inside a rectangular duct
M.R. Hajmohammadi, M. Rahmani, Antonio Campo et al. · Energy
|
22 Feb 2014 |
69 |
| 31 |
Effect of PCM and porous media/nanofluid on the thermal efficiency of microchannel heat sinks
Somayeh Davoodabadi Farahani, Amir Davoodabadi Farahani, Ebrahim Hajian · International Communications in Heat and Mass Transfer
|
24 Aug 2021 |
65 |
| 32 |
Design and optimization of an entirely hybrid renewable energy system (WT/PV/BW/HS/TES/EVPL) to supply electrical and thermal loads with considering uncertainties in generation and consumption
AmirHossein Azad, Hossein Shateri · Applied Energy
|
22 Feb 2023 |
64 |
| 33 |
Applying Optimized Support Vector Regression Models for Prediction of Tunnel Boring Machine Performance
Hadi Fattahi, Nima Babanouri · Geotechnical and Geological Engineering
|
21 Apr 2017 |
64 |
| 34 |
A comparative study of phenomenological, physically-based and artificial neural network models to predict the Hot flow behavior of API 5CT-L80 steel
Hassan Ahmadi, H. R. Rezaei Ashtiani, Mohammad Amin Heidari · Materials Today Communications
|
14 Aug 2020 |
63 |
| 35 |
Optimized ANFIS models based on grid partitioning, subtractive clustering, and fuzzy C-means to precise prediction of thermophysical properties of hybrid nanofluids
Zhongwei Zhang, Mohammed Al‐Bahrani, Behrooz Ruhani et al. · Chemical Engineering Journal
|
24 Jun 2023 |
62 |
| 36 |
Prediction of Blast-Induced Ground Vibration in a Mine Using Relevance Vector Regression Optimized by Metaheuristic Algorithms
Hadi Fattahi, Mahdi Hasanipanah · Natural Resources Research
|
13 Oct 2020 |
62 |
| 37 |
Mode I interlaminar fracture toughness of woven glass/epoxy composites with mat layers at delamination interface
Mohammad Reza Hosseini, Fathollah Taheri‐Behrooz, Mazaher Salamat‐Talab · Polymer Testing
|
19 Jun 2019 |
62 |
| 38 |
Modelling of shaft unbalance: Modelling a multi discs rotor using K-Nearest Neighbor and Decision Tree Algorithms
Mohammad Gohari, Amir Mohammad Eydi · Measurement
|
12 Nov 2019 |
61 |
| 39 |
Applying improved artificial neural network models to evaluate drilling rate index
Hadi Fattahi, Habibollah Bazdar · Tunnelling and Underground Space Technology
|
3 Aug 2017 |
59 |
| 40 |
Applying soft computing methods to predict the uniaxial compressive strength of rocks from schmidt hammer rebound values
Hadi Fattahi · Computational Geosciences
|
10 Apr 2017 |
59 |
| 41 |
Optimal network topology for responsive collective behavior
David Mateo, Nikolaj Horsevad, Vahid Hassani et al. · Science Advances
Open access |
3 Apr 2019 |
58 |
| 42 |
Control of PCM melting process in an annular space via continuous or discontinuous fin and non-uniform magnetic field
Somayeh Davoodabadi Farahani, Amir Davoodabadi Farahani, Ebrahim Hajian et al. · Journal of Energy Storage
|
Aug 2022 |
57 |
| 43 |
Green synthesis and characterization of hexaferrite strontium-perovskite strontium photocatalyst nanocomposites
Zahra Hajian Karahroudi, Kambiz Hedayati, Mojtaba Goodarzi · Main Group Metal Chemistry
Open access |
2020 |
57 |
| 44 |
Active Off-Road Seat Suspension System Using Intelligent Active Force Control
Mohammad Gohari, Mona Tahmasebi · Journal of low frequency noise, vibration and active control
Open access |
28 Oct 2015 |
57 |
| 45 |
Microwave-assisted freeze drying of pineapple: Kinetic, product quality, and energy consumption
Bolin Chen, Guan-Syun Lin, Mohammad Amani et al. · Case Studies in Thermal Engineering
Open access |
28 Dec 2022 |
56 |
| 46 |
Rheological behavior of engine oil based hybrid nanofluid containing MWCNTs and ZnO nanopowders: Experimental analysis, developing a novel correlation, and neural network modeling
Mojtaba Sepehrnia, Kazem Mohammadzadeh, Mohammad Mehdi Veyseh et al. · Powder Technology
|
May 2022 |
56 |
| 47 |
A comprehensive review on telecommunication challenges of microgrids secondary control
Negar Sheykhi, Abolfazl Salami, Josep Maria Guerrero et al. · International Journal of Electrical Power & Energy Systems
Open access |
Mar 2022 |
55 |
| 48 |
Polymer‐based nanocomposites fabricated by microemulsion method
Alireza Salabat, Farid Mirhoseini · Polymer Composites
|
25 Jan 2022 |
55 |
| 49 |
New ternary PLA/organoclay-hydrogel nanocomposites: Design, preparation and study on thermal, combustion and mechanical properties
Meisam Shabanian, Mohsen Hajibeygi, Kambiz Hedayati et al. · Materials & Design
|
23 Aug 2016 |
55 |
| 50 |
Implementation of a double layer of PCM integrated into the building exterior walls for reducing annual energy consumption: Effect of PCM wallboards position
Amirhossein Refahi, Abolfazl Rostami, Mohammad Amani · Journal of Energy Storage
|
23 Jan 2024 |
54 |