Institution · Cad Modelling Ergonomics (Italy)

Most cited papers from Cad Modelling Ergonomics (Italy)

Cad Modelling Ergonomics (Italy)

What are the most cited papers from Cad Modelling Ergonomics (Italy)?

The most cited paper from Cad Modelling Ergonomics (Italy) is "The role of air conditioning in the diffusion of Sars-CoV-2 in indoor environments: A first computational fluid dynamic model, based on investigations performed at the Vatican State Children's hospital" (Luca Borro, Lorenzo Mazzei, Massimiliano Raponi et al., 2020), with 151 citations. Next come "A Simple Method to Quantify Outward Leakage of Medical Face Masks and Barrier Face Coverings: Implication for the Overall Filtration Efficiency" (26) and "Heat Transfer and Pressure Loss Measurements of Matrix Cooling Geometries for Gas Turbine Airfoils" (24).

Published TypeFieldAccess

Showing 42 of 42 papers. Every paper is listed.

Most cited papers, sortable by citations and release date
#	Paper
1	The role of air conditioning in the diffusion of Sars-CoV-2 in indoor environments: A first computational fluid dynamic model, based on investigations performed at the Vatican State Children's hospital Luca Borro, Lorenzo Mazzei, Massimiliano Raponi et al. · Environmental Research Open access	14 Oct 2020	151
2	A Simple Method to Quantify Outward Leakage of Medical Face Masks and Barrier Face Coverings: Implication for the Overall Filtration Efficiency Silvia Chiera, Alessandro Cristoforetti, L. Benedetti et al. · International Journal of Environmental Research and Public Health Open access	16 Mar 2022	26
3	Heat Transfer and Pressure Loss Measurements of Matrix Cooling Geometries for Gas Turbine Airfoils Carlo Carcasci, Bruno Facchini, Marco Pievaroli et al. · Journal of Turbomachinery Open access	11 Aug 2014	24
4	Experimental and Numerical Investigation on Windage Power Losses in High Speed Gears Daniele Massini, Tommaso Fondelli, Antonio Andreini et al. Conference paper	26 Jun 2017	22
5	Experimental Investigation on Power Losses due to Oil Jet Lubrication in High Speed Gearing Systems Daniele Massini, Tommaso Fondelli, Bruno Facchini et al. Conference paper	26 Jun 2017	15
6	Numerical Characterization of Flow and Heat Transfer in Preswirl Systems Riccardo Da Soghe, Cosimo Bianchini, Jacopo D’Errico · Journal of Engineering for Gas Turbines and Power	Dec 2017	14
7	Computational Analysis of Windage Losses in an Epicyclic Gear Train Cosimo Bianchini, Riccardo Da Soghe, Jacopo D. Errico et al. Conference paper	26 Jun 2017	10
8	Development of Experimental and Numerical Methods for the Analysis of Active Clearance Control Systems1 Riccardo Da Soghe, Lorenzo Mazzei, Lorenzo Tarchi et al. · Journal of Engineering for Gas Turbines and Power Open access	19 Dec 2020	9
9	Measuring Total Filtration Efficiency of Surgical and Community Face Masks: Impact of Mask Design Features Silvia Chiera, Alessandro Cristoforetti, L. Benedetti et al. · IEEE Transactions on Instrumentation and Measurement Open access	2023	8
10	Aeroacoustic Computational Analysis of a Steam Turbine Trip Valve Claudio Bianchini, Riccardo Da Soghe, Lorenzo Cosi et al. · Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines Conference paper	15 Jun 2015	8
11	Effect of Jet-to-Jet Distance and Pipe Position on Flow and Heat Transfer Features of Active Clearance Control Systems Lorenzo Cocchi, Alessio Picchi, Bruno Facchini et al. · Journal of Engineering for Gas Turbines and Power Open access	9 Nov 2021	7
12	Aero-Thermal Investigation of Convective and Radiative Heat Transfer on Active Clearance Control Manifolds Riccardo Da Soghe, Cosimo Bianchini Conference paper	17 Jun 2019	7
13	Capacity building measures for chemical accident prevention and preparedness: Benchmark of EU neighbourhood countries Daniele Baranzini, Mark D. Wood, Elisabeth Krausmann et al. · International Journal of Disaster Risk Reduction Open access	27 Jul 2018	6
14	Experimental Investigation on Swirl and Heat Transfer Within a Rotor-Stator Cavity Daniele Massini, Bruno Facchini, Mirko Micio et al. Conference paper	13 Jun 2016	6
15	Numerical Characterization of Hot Gas Ingestion Through Turbine Rim Seals Riccardo Da Soghe, Cosimo Bianchini, Carl M. Sangan et al. Conference paper	13 Jun 2016	6
16	Design Procedure of a Rotating Cavity Rig for Hot Gas Ingestion Investigation Lorenzo Orsini, Alessio Picchi, Alessio Bonini et al. Conference paper	13 Jun 2022	5
17	Numerical Analysis of Pressure Losses in Diffuser and Tube Steam Partition Valves Claudio Bianchini, Mirko Micio, Livio Tarchi et al. Conference paper	3 Jun 2013	5
18	Experimental Investigation of Swirl and Flow Structure Inside a Rotor-Stator Cavity Bruno Facchini, Daniele Massini, Alessio Picchi et al. Conference paper	15 Jun 2015	5
19	Load Independent Losses of an Aeroengine Epicyclic Power Gear Train: Numerical Investigation Cosimo Bianchini, Riccardo Da Soghe, Lorenzo Giannini et al. Conference paper	17 Jun 2019	4
20	Effect of Temperature Ratio on Jet Impingement Heat Transfer in Active Clearance Control Systems Riccardo Da Soghe, Cosimo Bianchini, Jacopo D’Errico et al. Conference paper	11 Jun 2018	4
21	Effect of Rim Seal Configuration on Gas Turbine Cavity Sealing in Both Design and Off-Design Conditions Riccardo Da Soghe, Cosimo Bianchini, Mirko Micio et al. Conference paper	11 Jun 2018	4
22	Numerical Investigation to Support the Design of a Flat Plate Honeycomb Seal Test Rig Cosimo Bianchini, Mirko Micio, Francesco Maiuolo et al. Conference paper	3 Jun 2013	4
23	Effect of Jet-to-Plate Temperature Ratio on Flow and Heat Transfer Features of Active Clearance Control Systems Riccardo Da Soghe, Lorenzo Mazzei, Lorenzo Tarchi et al. Conference paper	13 Jun 2022	3
24	Effects of Impeller Squealer Tip on Centrifugal Compressor Performance Riccardo Da Soghe, Cosimo Bianchini, Lorenzo Toni et al. Conference paper	13 Jun 2016	3
25	On the Extrapolation of Rim Sealing Performance From Test Bench to Real Engine: A Numerical Survey Riccardo Da Soghe, Cosimo Bianchini, Lorenzo Mazzei et al. · Journal of Engineering for Gas Turbines and Power	3 Nov 2021	3
26	Windage Losses of a Meshing Gear Pair Measured at Different Working Conditions Daniele Massini, Tommaso Fondelli, Bruno Facchini et al. Conference paper	11 Jun 2018	3
27	Numerical Characterization of Swirl Brakes for High Pressure Centrifugal Compressors Riccardo Da Soghe, Mirko Micio, Antonio Andreini et al. Conference paper	3 Jun 2013	3
28	Numerical Analysis of the Unsteady Loads on a Steam Turbine Double Seat Control Valve Cosimo Bianchini, Riccardo Da Soghe, Lorenzo Cosi et al. Conference paper	16 Jun 2014	2
29	The role of filter breathability in reducing the fraction of exhaled air leaking from surgical and community face masks Silvia Chiera, Alessandro Cristoforetti, L. Benedetti et al. · 2022 IEEE International Symposium on Medical Measurements and Applications (MeMeA) Conference paper	22 Jun 2022	1
30	Heat Transfer Augmentation due to Coolant Extraction on the Cold Side of Active Clearance Control Manifolds Riccardo Da Soghe, Cosimo Bianchini, Antonio Andreini et al. Conference paper	15 Jun 2015	1
31	Development of Experimental and Numerical Methods for the Analysis of Active Clearance Control Systems Riccardo Da Soghe, Lorenzo Mazzei, Lorenzo Tarchi et al. Conference paper	21 Sep 2020	1
32	The Body-ScanFIT System: The Importance of Population's Classification into Morphological Families and of Anthropometric Mannequins in Apparel and Ergonomics Gianni Sereni, Leonardo De Franceschi Conference paperOpen access	16 Oct 2012	1
33	Unsteady Investigation of Side Loading Effect on Single-Stage Centrifugal Compressors Marco Bicchi, Fabrizio Lottini, Davide Biliotti et al. Conference paper	24 Jun 2024	0
34	Impact of Steady-State and Mixing Plane Assumptions: An Application to an Industrial Two-Stage High-Pressure Turbine Lorenzo Mazzei, Niccolò Casini, Riccardo Da Soghe et al. Conference paper	24 Jun 2024	0
35	CFD Analysis of the Forces on a Steam Turbine Balance Seal Packing Ring Cosimo Bianchini, Riccardo Da Soghe, Davide Bertini et al. Conference paper	13 Jun 2022	0
36	Flat Plate Honeycomb Seals Friction Factor Analysis Mirko Micio, Cosimo Bianchini, Daniele Massini et al. Conference paper	16 Jun 2014	0
37	Thermo Fluid Dynamic Analysis of a Gas Turbine Transition-Piece Riccardo Da Soghe, Cosimo Bianchini, Antonio Andreini et al. Conference paper	16 Jun 2014	0
38	Modular Tool for Design and Off-Design Analysis of Compression Trains for Oil and Gas Applications Carlo Carcasci, Lorenzo Marini, Mirko Micio et al. · Volume 9: Oil and Gas Applications; Supercritical CO2 Power Cycles; Wind Energy Conference paper	13 Jun 2016	0
39	CFD Investigation of a Lean Premixed Burner Redesign for High Hydrogen Content Syngas Operation Claudio Bianchini, Riccardo Da Soghe, Antonio Andreini et al. Conference paper	15 Jun 2015	0
40	Body-ScanFit System: Identifying Body Shapes. An Anthropometric Survey Carried Out in 2010 by CME Giuseppe Figlie, Leonardo De Franceschi Conference paperOpen access	25 Oct 2011	0
41	Body-ScanFit System Leonardo De Franceschi Conference paperOpen access	19 Oct 2010	0
42	Metal Temperature Prediction of a DLN1 Class Flame Tube by CFD CHT Approach Riccardo Da Soghe, Cosimo Bianchini, Antonio Andreini et al. Conference paper	15 Jun 2015	0

Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.