Institution · FISBA OPTIK (Switzerland)
Most cited papers from FISBA OPTIK (Switzerland)
What are the most cited papers from FISBA OPTIK (Switzerland)?
The most cited paper from FISBA OPTIK (Switzerland) is "High-power cw neodymium-doped fiber laser operating at 92 W with high beam quality" (Holger Zellmer, Sonja Unger, P. Albers et al., 1995), with 124 citations. Next come "A Fabry–Perot interferometer for micrometer-sized cantilevers" (92) and "The correlation between mechanical stress, thermal shift and refractive index in HfO2, Nb2O5, Ta2O5 and SiO2 layers and its relation to the layer porosity" (81).
Showing 50 of 59 papers. Every paper with more than 2 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | High-power cw neodymium-doped fiber laser operating at 92 W with high beam quality Holger Zellmer, Sonja Unger, P. Albers et al. · Optics Letters | 15 Mar 1995 | 124 |
| 2 | A Fabry–Perot interferometer for micrometer-sized cantilevers Bart W. Hoogenboom, Patrick L T M Frederix, Jinling Yang et al. · Applied Physics Letters | 7 Feb 2005 | 92 |
| 3 | The correlation between mechanical stress, thermal shift and refractive index in HfO2, Nb2O5, Ta2O5 and SiO2 layers and its relation to the layer porosity O. Stenzel, Steffen Wilbrandt, Norbert Kaiser et al. · Thin Solid Films | 16 May 2009 | 81 |
| 4 | iTIRM as a tool for qualifying polishing processes Oliver Fähnle, Torsten Wons, Evelyn Koch et al. · Applied Optics | Jul 2002 | 29 |
| 5 | Stochastic modeling of light scattering with fluorescence using a Monte Carlo-based multiscale approach Miloš Šormaz, Tobias Stamm, Safer Mourad et al. · Journal of the Optical Society of America A | 20 May 2009 | 28 |
| 6 | Process optimization in optical fabrication Oliver W. Faehnle · Optical Engineering | 28 Mar 2016 | 24 |
| 7 | A switched-beam linearly-polarized transmitarray antenna for V-band backhaul applications Amazir Moknache, Laurent Dussopt, Jussi Säily et al. | Apr 2016 | 23 |
| 8 | Prepolishing and finishing of optical surfaces using fluid jet polishing Wilhelmus A. C. M. Messelink, Reto Waeger, Torsten Wons et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 18 Aug 2005 | 19 |
| 9 | The use of a radial basis neural network and genetic algorithm for improving the efficiency of laccase-mediated dye decolourization Mark A. Schubert, A. Muffler, Safer Mourad · Journal of Biotechnology | 23 Aug 2012 | 19 |
| 10 | In-process monitoring of grinding and polishing of optical surfaces Roy Bijl, Oliver Fähnle, Hedser van Brug et al. · Applied Optics | Jul 2000 | 17 |
| 11 | Feasibility study in combined direct metal deposition (DMD) and plasma transfer arc welding (PTA) additive manufacturing Mohammad Dalaee, F. Cheaitani, Ariyan Arabi-Hashemi et al. · The International Journal of Advanced Manufacturing Technology | 16 Jan 2020 | 15 |
| 12 | Ductile mode single point diamond turning (SPDT) of binderless tungsten carbide molds Oliver Fähnle, Marius Doetz, Olaf Dambon et al. | 14 Sep 2018 | 14 |
| 13 | Automated image processing for quantification of blue-stain discolouration of Norway spruce wood Mark A. Schubert, Safer Mourad, Francis W. M. R. Schwarze · Wood Science and Technology | 10 Apr 2010 | 13 |
| 14 | Analysis of critical process parameters of ductile mode grinding of brittle materials Oliver W. Faehnle, Marius Doetz, Olaf Dambon · Advanced Optical Technologies | 25 Aug 2017 | 12 |
| 15 | A mathematical model for machining spot in fluid jet polishing explained Silvia M. Booij, Hedser van Brug, Oliver Fähnle | 2000 | 11 |
| 16 | Abrasive Jet Polishing Approaches to the Manufacture of Micro-optics with Complex Shapes Oliver W. Faehnle | 2012 | 10 |
| 17 | Closed-loop laser polishing using in-process surface finish metrology Oliver W. Faehnle, Rolf Rascher, Christian Vogt et al. · Applied Optics | 30 Jan 2018 | 9 |
| 18 | Exploiting the Process Stability of Fluid Jet Polishing Wilhelmus A. C. M. Messelink, Oliver W. Faehnle · Frontiers in Optics 2008/Laser Science XXIV/Plasmonics and Metamaterials/Optical Fabrication and Testing | 2008 | 9 |
| 19 | Optimization of polishing processes by using iTIRM for in situ monitoring of surface quality Mark Meeder, Thomas Mauret, Silvia M. Booij et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 5 Jan 2004 | 9 |
| 20 | „Aspheric Freedoms” of Glass Andreas F. Kunz · Optik & Photonik | Dec 2009 | 8 |
| 21 | Influence of coolant on ductile mode processing of binderless nanocrystalline tungsten carbide through ultraprecision diamond turning Marius Doetz, Olaf Dambon, Fritz Klocke et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 27 Aug 2015 | 8 |
| 22 | Focusing of diode lasers for high beam quality in high-power applications P. Albers | 15 Apr 1993 | 7 |
| 23 | Micro-optic solutions for beam shaping of individually addressable high-power single-mode diode laser arrays Martin Forrer, D. Kura, E. Langenbach · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 11 Feb 2010 | 7 |
| 24 | Study of footprint variations of CCP considering machine kinematics Guoyu Yu, Christina L. Reynolds, David Douglas Walker et al. · EPJ Web of Conferences | 2019 | 6 |
| 25 | OPTEL-μ LEO to ground laser communications terminal: flight design and status of the EQM development project Raúl Gregor, Guy Baister, Michael Bacher et al. | 25 Sep 2017 | 6 |
| 26 | Diffractive optics for compact space communication terminals Peter Blattner, H. P. Herzig, K. J. Weible et al. · Journal of Modern Optics | Jul 1996 | 6 |
| 27 | Analysis of the ductile-brittle mode transition in loose abrasive grinding Mark Meeder, Wilhelmus A. C. M. Messelink, Oliver W. Faehnle · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 18 Aug 2005 | 6 |
| 28 | Jules Verne: a new polishing technique related to FJP Silvia M. Booij, Oliver W. Faehnle, Mark Meeder et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 5 Jan 2004 | 6 |
| 29 | Prediction and optimization of the laccase-mediated synthesis of the antimicrobial compound iodine (I2) Mark A. Schubert, Angelika Fey, Julian Ihssen et al. · Journal of Biotechnology | 4 Dec 2014 | 6 |
| 30 | Holographic projection based on tapered lasers and nematic liquid crystal on silicon devices N. Collings, Martin Reufer, Richard V. Penty et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 13 Aug 2010 | 6 |
| 31 | High precision automated tab assembly with micro optics for optimized high-power diode laser collimation Martin Forrer, Helen Strub, Tobias Honig et al. | 21 Feb 2020 | 5 |
| 32 | Illumination design patterns for homogenization and color mixing Julius A. Muschaweck, Henning Rehn · Advanced Optical Technologies | 11 Jan 2019 | 5 |
| 33 | Fast axis collimation for high power diode lasers D. Kura, Hansruedi Moser, E. Langenbach et al. | Oct 2009 | 5 |
| 34 | Diffractive optical elements for space communication terminals Hans Peter Herzig, P. Ehbets, Juan M. Teijido et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 30 Sep 1994 | 5 |
| 35 | Three wagons method applied: optimization of level of surface roughness within ductile mode grinding of tungsten carbide molds Oliver Fähnle, Marius Doetz, Olaf Dambon et al. | 14 Sep 2018 | 4 |
| 36 | Robust adhesive precision bonding in automated assembly cells Tobias Müller, Sebastian Haag, Thomas Bastuck et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 12 Mar 2014 | 4 |
| 37 | Three Wagons Approach Applied to Optimization of Industrial Grinding Processes Christian Vogt, Oliver W. Faehnle, Rolf Rascher | 2017 | 4 |
| 38 | Special Section Guest Editorial: Freeform Optics Oliver Fähnle, Daewook Kim, Ray A. Williamson · Optical Engineering | 18 Jul 2016 | 4 |
| 39 | Comparative study of the laser damage threshold and optical characteristics of Ta2O5-SiO2multilayers deposited using various methods Roelene Botha, Silvia Schwyn Thöny, M. Grössl et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 23 Nov 2015 | 4 |
| 40 | Analysis of fine-grinding techniques in terms of achievable surface qualities Oliver Fähnle, Karin Hauser · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 8 Sep 2011 | 4 |
| 41 | Top hat beam shaping for a high power laser diode bar with a wavelength of 780 – 1100 nm Hansruedi Moser, D. Kura, Hans Forrer et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 12 Mar 2013 | 4 |
| 42 | Factor Exposure Variation and Mutual Fund Performance Manuel Ammann, Sebastian Fischer, Florian Weigert · Financial Analysts Journal | 8 Oct 2020 | 3 |
| 43 | Process window analysis of ductile mode machining of binderless tungsten carbide molds Marius Doetz, Ji Eun Lee, Olaf Dambon et al. | 14 Sep 2018 | 3 |
| 44 | SPDT and standard CNC-grinding of tungsten carbide molds for precision glass molding: an experimental process analysis Marius Doetz, Oliver W. Faehnle, Christian Vogt | 7 Aug 2018 | 3 |
| 45 | Impact of absorption in fast axis collimation lenses M. G. Huber, Frank Saupe, Hans Forrer et al. | 26 Feb 2018 | 3 |
| 46 | Development and optimization of FJP tools and their practical verification Wilhelmus A. C. M. Messelink, Reto Waeger, Mark Meeder et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE | 18 Aug 2005 | 3 |
| 47 | Ray tracing in gradient-index materials Eckhard Langenbach | 15 Apr 1993 | 3 |
| 48 | Novel laser-based manufacturing chain for wafer-level mini-optics David Bischof, Sven Lämmler, Hansruedi Moser et al. | 30 Jul 2024 | 2 |
| 49 | Filled-Up-Microscopy (FUM): a non-destructive method for approximating the depth of sub-surface damage on ground surfaces Christian J. Trum, Christian Vogt, Sebastian Sitzberger et al. | 7 Aug 2018 | 2 |
| 50 | Process control in ductile mode machining of tungsten carbide Oliver Fähnle, Marius Doetz, Olaf Dambon et al. | 15 Jun 2018 | 2 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.