| 1 |
Towards Intelligent and Sustainable Production: Combining and Integrating Online Predictive Maintenance and Continuous Quality Control
John Lindström, Hans Larsson, Martin Jönsson et al. · Procedia CIRP
Open access |
2017 |
59 |
| 2 |
Influence of microstructure on the fracture toughness of hot stamped boron steel
Stefan Golling, David Frómeta, Daniel Casellas et al. · Materials Science and Engineering A
|
19 Nov 2018 |
55 |
| 3 |
An Initial Model for Zero Defect Manufacturing
John Lindström, Petter Kyösti, Wolfgang Birk et al. · Applied Sciences
Open access |
Jul 2020 |
54 |
| 4 |
Towards intelligent and sustainable production systems with a zero-defect manufacturing approach in an Industry4.0 context
John Lindström, Erik Lejon, Petter Kyösti et al. · Procedia CIRP
Open access |
2019 |
40 |
| 5 |
State of the art in simulation-driven design
Magnus Karlberg, Magnus Löfstrand, Stefan Sandberg et al. · International Journal of Product Development
|
2013 |
39 |
| 6 |
Investigation on the influence of loading-rate on fracture toughness of AHSS grades
Stefan Golling, David Frómeta, Daniel Casellas et al. · Materials Science and Engineering A
|
24 Apr 2018 |
29 |
| 7 |
Machine learning for detection of anomalies in press-hardening: Selection of efficient methods
Erik Lejon, Petter Kyösti, John Lindström · Procedia CIRP
Open access |
2018 |
28 |
| 8 |
Characterization of ductile fracture properties of quench-hardenable boron steel: Influence of microstructure and processing conditions
Stefan Golling, Rickard Östlund, Mats Oldenburg · Materials Science and Engineering A
Open access |
5 Feb 2016 |
26 |
| 9 |
Review of the Numerical Modeling of Compression Molding of Sheet Molding Compound
Gustaf Alnersson, M. Waseem Tahir, Anna‐Lena Ljung et al. · Processes
Open access |
5 Feb 2020 |
25 |
| 10 |
A Systematic Method for Predictive In Silico Chemical Vapor Deposition
Örjan Danielsson, Matts O. Karlsson, Pitsiri Sukkaew et al. · The Journal of Physical Chemistry C
Open access |
19 Mar 2020 |
23 |
| 11 |
Evaluation of localization and failure of boron alloyed steels with different microstructure compositions
Rickard Östlund, Mats Oldenburg, Hans‐Åke Häggblad et al. · Journal of Materials Processing Technology
|
23 Sep 2013 |
22 |
| 12 |
Extensive Introduction of Ultra High Strength Steels Sets New Standards for Welding in the Body Shop
Johnny K. Larsson, Joel Lundgren, Einar Jón Ásbjörnsson et al. · Welding in the World
|
May 2009 |
22 |
| 13 |
Estimation of constitutive parameters for powder pressing by inverse modelling
Bengt Wikman, Greger Bergman, Mats Oldenburg et al. · Structural and Multidisciplinary Optimization
|
13 Dec 2005 |
22 |
| 14 |
Experimental and Numerical Evaluation of the Heat Transfer Coefficient in Press Hardening
Per Salomonsson, Mats Oldenburg, Paul Åkerström et al. · steel research international
|
Nov 2009 |
18 |
| 15 |
Experimental and finite element robustness studies of a bumper system subjected to an offset impact loading
David Lönn, Greger Bergman, Larsgunnar Nilsson et al. · International Journal of Crashworthiness
|
30 Apr 2011 |
17 |
| 16 |
Efficient Design Module Capture and Representation for Product Family Reuse
Michael Lundin, Erik Lejon, Andreas Dagman et al. · Journal of Computing and Information Science in Engineering
|
23 Jan 2017 |
14 |
| 17 |
Effect of Tempering on Microstructure and Tensile Properties of Ultra-High Strength Steels for Press Hardening Applications
Khalifa Maissara, Farnoosh Forouzan, Pia Åkerfeldt et al. · Metallurgical and Materials Transactions A
Open access |
16 May 2025 |
12 |
| 18 |
Supporting engineering decisions through contextual, model-oriented communication and knowledge-based engineering in simulation-driven product development: an automotive case study
Stefan Sandberg, Michael Lundin, Mats Näsström et al. · Journal of Engineering Design
|
28 Jun 2012 |
10 |
| 19 |
Indentation fracture toughness of boronized unalloyed and alloyed ductile iron
Gülcan Toktaş, Selman Korkmaz · Materials Chemistry and Physics
|
20 Dec 2022 |
9 |
| 20 |
A unified physically-based finite deformation model for damage growth in composites
Sérgio Costa, Hana Zrida, Robin Olsson et al. · Composites Part A Applied Science and Manufacturing
Open access |
22 Jul 2022 |
9 |
| 21 |
Hot Forming of Ultra-Fine-Grained Multiphase Steel Products Using Press Hardening Combined with Quenching and Partitioning Process
Esa Vuorinen, Almila Gülfem Özügürler, John C. Ion et al. · Metals
Open access |
20 Mar 2019 |
9 |
| 22 |
Numerical failure analysis of steel sheets using a localization enhanced element and a stress based fracture criterion
Rickard Östlund, Mats Oldenburg, Hans‐Åke Häggblad et al. · International Journal of Solids and Structures
Open access |
24 Dec 2014 |
9 |
| 23 |
The essential work of fracture in peridynamics
Christer Stenström, Kjell Eriksson, Florin Bobaru et al. · International Journal of Fracture
Open access |
10 Jul 2023 |
8 |
| 24 |
Zero Defect Manufacturing in an Industry 4.0 Context: A Case Study of Requirements for Change and Desired Effects
John Lindström, Petter Kyösti, Erik Lejon et al. · SSRN Electronic Journal
PreprintOpen access |
2020 |
8 |
| 25 |
Hybrid laser metal deposition of a Fe–Cr–Mo–V–Mn tool steel for hot stamping applications
Tobia Romano, Marawan Abdelwahed, Sven Bengtsson et al. · Progress in Additive Manufacturing
Open access |
20 Jan 2023 |
7 |
| 26 |
Optimization of Thick 22MnB5 Sheet Steel Part Performance through Laser Tempering
Eduard Garcia-Llamas, Jaume Pujante, David Frómeta et al. · Metals
Open access |
15 Feb 2023 |
6 |
| 27 |
A case study of mechanical and thermal fatigue of press hardening dies
Katerina Chantziara, Faezeh Javadzadeh Kalahroudi, Jens Bergström et al. · IOP Conference Series Materials Science and Engineering
Conference paperOpen access |
May 2022 |
6 |
| 28 |
Modelling of Plastic Deformation and Fracture in Hot Stamped Steel with Multi-Phase Microstructure
Stefan Golling, Rickard Östlund, Greger Bergman et al. · Procedia Engineering
Conference paperOpen access |
2017 |
6 |
| 29 |
Mechanistic Model with Empirical Pitting Onset Approach for Detailed and Efficient Virtual Analysis of Atmospheric Bimetallic Corrosion
Tommy Georgios Zavalis, Mats Ström, Dan Persson et al. · Materials
Open access |
18 Jan 2023 |
5 |
| 30 |
Mesoscale modeling of ultra-thin woven fabric composite subjected to in-plane loading
Hana Zrida, Martin Fagerström · Advanced Composite Materials
|
5 Jun 2022 |
5 |
| 31 |
Investigating the Tensile Properties of 22MnB5 After Austenitization and Quenching with Different Initial Microstructures
Erik Lundholm, Jörgen Kajberg, Paul Åkerström · Metals
Open access |
25 May 2025 |
4 |
| 32 |
A Comparative Study on Conventional and Hybrid Quenching Hot Forming Methods of 22MnB5 Steel for Mechanical Properties and Microstructure
Ferdi Eşiyok, Rukiye Ertan, Gökhan Sevi̇lgen et al. · Journal of Materials Engineering and Performance
|
Aug 2022 |
4 |
| 33 |
A stress-based fracture criteria validated on mixed microstructures of ferrite and bainite over a range of stress triaxialities
Stefan Golling, Rickad Östlund, Mats Oldenburg · Materials Science and Engineering A
Open access |
2 Aug 2016 |
4 |
| 34 |
3D flow and fibre orientation modelling of compression moulding of A-SMC: simulations and experimental validation in squeeze flow
Gustaf Alnersson, Erik Lejon, Hana Zrida et al. · Functional Composite Materials
Open access |
20 Nov 2023 |
3 |
| 35 |
From Blank to Fractured Component: Numerical and Experimental Results of a Laboratory Scale Component
Stefan Marth, Stefan Golling, Rickard Östlund et al. · IOP Conference Series Materials Science and Engineering
Conference paperOpen access |
21 Sep 2018 |
2 |
| 36 |
The Corrosion Properties of Zinc Coated Boron Steel for the Direct Press Hardening Process
Mattias Jönsson, Daniel Berglund
Conference paper |
6 Mar 2017 |
2 |
| 37 |
The Direct Press Hardening Process for Zn-Coated Ultra-High Strength Steels
K. Isaksson, Mattias Jönsson, Daniel Berglund
Conference paper |
10 Mar 2016 |
2 |
| 38 |
Simulation and Evaluation of Phase Transformations and Mechanical Response in the Hot Stamping Process
Mats Oldenburg, Paul Åkerström, Greger Bergman et al. · AIP conference proceedings
Conference paper |
2007 |
2 |
| 39 |
A capability maturity model (CMM) for long-term management of Zero Defect Manufacturing (ZDM) implementations – ZDM-CMM
John Lindström, Petter Kyösti, Foivos Psarommatis et al. · Procedia CIRP
Open access |
2025 |
1 |
| 40 |
Interoperability requirements for Zero Defect Manufacturing within Industry4.0
John Lindström, Petter Kyösti, Wolfgang Birk et al. · Procedia CIRP
Open access |
2025 |
1 |
| 41 |
Influence of Surface Carbon Content and PAG Size on the Bendability of Hot-Stamped Boron Steel
Lisa Levander, Katarina Eriksson, Kyle Thomason
Conference paperOpen access |
27 May 2024 |
1 |
| 42 |
Performance of resistance spot weld caps coated with Ni and Fe aluminide alloys by electro spark deposition on hot dip galvanized steel
İbrahim F. Açış, Şükrü Talaş · Revista de Metalurgia
Open access |
27 Apr 2023 |
1 |
| 43 |
Improved Scale Adhesion of Uncoated Hot Stamped Steel
L. Levander
Conference paper |
6 Mar 2017 |
1 |
| 44 |
Nanoscale investigation of residual element segregation in steels produced through low CO2 routes
Chaymaa Boujrouf, A. Portavoce, Surya Nilamegam Kumaran et al. · Zenodo (CERN European Organization for Nuclear Research)
Open access |
23 Apr 2026 |
0 |
| 45 |
Mitigation Strategies for Delayed Cracking in Laser Welding of Advanced High-Strength Steel
Ethan Sullivan, Pia Borg, Jukka Siltanen et al.
Conference paper |
2026 |
0 |
| 46 |
Press Hardening for Sustainable Lightweight Chassis Design in Heavy‐Duty Vehicles: A Material Performance and Life Cycle Assessment Approach
Violeta Vargas‐Parra, Sergi Parareda, Jose Jorge Espí‐Gallart et al. · steel research international
Open access |
17 Mar 2026 |
0 |
| 47 |
The Influence of Austenitization Conditions on Grain Growth and the Bending Performance of Boron Steel
Erik Lundholm, Khalifa Maissara, Paul Åkerström · Metallurgical and Materials Transactions B
Open access |
24 Nov 2025 |
0 |
| 48 |
Corrosion Behaviour of Boronized Ductile irons in Formic and Nitric Acid Solutions
Gülcan Toktaş, Selman Korkmaz · Protection of Metals and Physical Chemistry of Surfaces
|
Jun 2024 |
0 |
| 49 |
Numerical Simulation of the Forming and Pole Impact of a b-Pillar With Local Tailored Mechanical Properties
Paul Åkerström, Gunnar Bergman, Juan Macchi et al.
Conference paperOpen access |
27 May 2024 |
0 |
| 50 |
Press Hardening as a Sustainable Solution for Lightweight Chassis Construction in Heavy-Duty Vehicles from a LCA Perspective
M. Violeta Vargas-Parra, J. Espí-Gallart, Daniel Casellas et al.
Conference paperOpen access |
27 May 2024 |
0 |