Institution · GKN (Sweden)
Most cited papers from GKN (Sweden)
What are the most cited papers from GKN (Sweden)?
The most cited paper from GKN (Sweden) is "Tool wear on nickel alloys with different coolant pressures: Comparison of Alloy 718 and Waspaloy" (Roberto Polvorosa, Alfredo Suárez, Luís Norberto López de Lacalle et al., 2017), with 196 citations. Next come "Intergranular crack tip oxidation in a Ni-base superalloy" (149) and "Effects of Ultrasonics-Assisted Face Milling on Surface Integrity and Fatigue Life of Ni-Alloy 718" (145).
Showing 50 of 60 papers. Every paper with more than 33 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Tool wear on nickel alloys with different coolant pressures: Comparison of Alloy 718 and Waspaloy Roberto Polvorosa, Alfredo Suárez, Luís Norberto López de Lacalle et al. · Journal of Manufacturing Processes | 9 Feb 2017 | 196 |
| 2 | Intergranular crack tip oxidation in a Ni-base superalloy Leif Viskari, M. Hörnqvist, Katie L. Moore et al. · Acta Materialia | 2 Apr 2013 | 149 |
| 3 | Effects of Ultrasonics-Assisted Face Milling on Surface Integrity and Fatigue Life of Ni-Alloy 718 Alfredo Suárez, Fernando Veiga, Luís Norberto López de Lacalle et al. · Journal of Materials Engineering and Performance | 27 Sep 2016 | 145 |
| 4 | Long‐term Clinical and Ultrasound Evaluation After Arthroscopic Acromioplasty in Patients With Partial Rotator Cuff Tears Jüri Kartus, Catarina Kartus, Lars Rostgård-Christensen et al. · Arthroscopy The Journal of Arthroscopic and Related Surgery | 2006 | 144 |
| 5 | Simulation of additive manufacturing using coupled constitutive and microstructure models Lars‐Erik Lindgren, Andreas Lundbäck, Martin Fisk et al. · Additive manufacturing | 10 May 2016 | 134 |
| 6 | An investigation of micro-mechanisms in hydrogen induced cracking in nickel-based superalloy 718 Sathiskumar Jothi, Sergiy Vasil ́ović Merzlikin, T.N. Croft et al. · Journal of Alloys and Compounds | 6 Jan 2016 | 131 |
| 7 | Oxidation and alpha-case formation in Ti–6Al–2Sn–4Zr–2Mo alloy Raghuveer Gaddam, Birhan Sefer, Robert Pederson et al. · Materials Characterization | 18 Nov 2014 | 123 |
| 8 | Investigation of surface integrity in laser-assisted machining of nickel based superalloy Dongdong Xu, Zhirong Liao, Dragos A. Axinte et al. · Materials & Design | 5 Jun 2020 | 116 |
| 9 | An experimental study of fibre waviness and its effects on compressive properties of unidirectional NCF composites Dennis Wilhelmsson, Renaud Gutkin, Fredrik Edgren et al. · Composites Part A Applied Science and Manufacturing | 9 Feb 2018 | 112 |
| 10 | A model-based approach for sustainability and value assessment in the aerospace value chain Marco Bertoni, Sophie Isaksson Hallstedt, Ola Isaksson · Advances in Mechanical Engineering | Jun 2015 | 110 |
| 11 | TBC bond coat–top coat interface roughness: Influence on fatigue life and modelling aspects Robert Eriksson, Sören Sjöström, Hå̊kan Brodin et al. · Surface and Coatings Technology | 5 Oct 2013 | 101 |
| 12 | Effects of voids on quasi-static and tension fatigue behaviour of carbon-fibre composite laminates Sanjay Sisodia, Erik Kristofer Gamstedt, Fredrik Edgren et al. · Journal of Composite Materials | 4 Jul 2014 | 98 |
| 13 | Effects of high-pressure cooling on the wear patterns on turning inserts used on alloy IN718 Alfredo Suárez, Luís Norberto López de Lacalle, Roberto Polvorosa et al. · Materials and Manufacturing Processes | 7 Oct 2016 | 97 |
| 14 | Surface integrity and fatigue of non-conventional machined Alloy 718 Alfredo Suárez, Fernando Veiga, Roberto Polvorosa et al. · Journal of Manufacturing Processes | 3 Nov 2019 | 96 |
| 15 | Microstructure modelling of laser metal powder directed energy deposition of alloy 718 Chamara Kumara, Andreas Segerstark, Fabian Hanning et al. · Additive manufacturing | 22 Nov 2018 | 96 |
| 16 | Understanding product-service system innovation capabilities development for manufacturing companies Johanna Wallin, Vinit Parida, Ola Isaksson · Journal of Manufacturing Technology Management | Jun 2015 | 95 |
| 17 | BRIDGING THE GAP BETWEEN UNIVERSITY AND INDUSTRY: THREE MECHANISMS FOR INNOVATION EFFICIENCY Johanna Wallin, Ola Isaksson, ANDREAS LARSSON et al. · International Journal of Innovation and Technology Management | 25 Nov 2013 | 87 |
| 18 | Sustainability impact and effects analysis - A risk management tool for sustainable product development Jesko Schulte, Sören Knuts · Sustainable Production and Consumption | 10 Jan 2022 | 77 |
| 19 | The hierarchy of microstructure parameters affecting the tensile ductility in centrifugally cast and forged Ti-834 alloy during high temperature exposure in air P. W. Davies, Robert Pederson, Mark Coleman et al. · Acta Materialia | 15 Jul 2016 | 77 |
| 20 | Automated defect detection in digital radiography of aerospace welds using deep learning Topias Tyystjärvi, Iikka Virkkunen, Peter Fridolf et al. · Welding in the World | 24 Feb 2022 | 74 |
| 21 | Evaluation of surface integrity after high energy machining with EDM, laser beam machining and abrasive water jet machining of alloy 718 Jonas Holmberg, Johan Berglund, Anders Wretland et al. · The International Journal of Advanced Manufacturing Technology | 5 Oct 2018 | 74 |
| 22 | Value visualization in Product Service Systems preliminary design Alessandro Bertoni, Marco Bertoni, Ola Isaksson · Journal of Cleaner Production | 19 Apr 2013 | 73 |
| 23 | Influence of surface integrity induced by multiple machining processes upon the fatigue performance of a nickel based superalloy Zhirong Liao, Dongdong Xu, Gonzalo García Luna et al. · Journal of Materials Processing Technology | 29 Jul 2021 | 71 |
| 24 | Value‐Driven Design – A methodology to Link Expectations to Technical Requirements in the Extended Enterprise Ola Isaksson, Mario Kossmann, Marco Bertoni et al. · INCOSE International Symposium | Jun 2013 | 71 |
| 25 | The role of microstructural characteristics of additively manufactured Alloy 718 on tool wear in machining Amir Malakizadi, Tina Hajali, Fiona Schulz et al. · International Journal of Machine Tools and Manufacture | 11 Oct 2021 | 68 |
| 26 | An investigation of cutting forces and tool wear in turning of Haynes 282 Alfredo Suárez, Fernando Veiga, Luís Norberto López de Lacalle et al. · Journal of Manufacturing Processes | 24 Dec 2018 | 68 |
| 27 | High-resolution computed tomography in resin infused woven carbon fibre composites with voids Sanjay Sisodia, Serafina C. Garcea, Andrew R. George et al. · Composites Science and Technology | 24 May 2016 | 67 |
| 28 | Globally disseminated human pathogenic Escherichia coli of O25b‐ST131 clone, harbouring bla CTX‐M‐15 , found in Glaucous‐winged gull at remote Commander Islands, Russia Jorge Hernández, Jonas Bonnedahl, Ingvar Eliasson et al. · Environmental Microbiology Reports | 23 Feb 2010 | 67 |
| 29 | Evaluation of the Lifetime and Thermal Conductivity of Dysprosia-Stabilized Thermal Barrier Coating Systems Nicholas A. Curry, Nicolaie Markocsan, Lars Östergren et al. · Journal of Thermal Spray Technology | 25 Apr 2013 | 67 |
| 30 | The efficiency of a pulsed detonation combustor–axial turbine integration Carlos M. Xisto, Olivier Petit, Tomas Grönstedt et al. · Aerospace Science and Technology | 5 Sep 2018 | 66 |
| 31 | Compact heat exchangers for hydrogen-fueled aero engine intercooling and recuperation Alexandre Capitao Patrao, Isak Jonsson, Carlos M. Xisto et al. · Applied Thermal Engineering | 28 Jan 2024 | 65 |
| 32 | Microstructure of Haynes® 282® Superalloy after Vacuum Induction Melting and Investment Casting of Thin-Walled Components Hubert Matysiak, Małgorzata Zagórska, Joel Andersson et al. · Materials | Nov 2013 | 63 |
| 33 | Assessing sustainability and value of manufacturing processes: a case in the aerospace industry Sophie Isaksson Hallstedt, Marco Bertoni, Ola Isaksson · Journal of Cleaner Production | 18 Jun 2015 | 63 |
| 34 | Hot-Wire Laser-Directed Energy Deposition: Process Characteristics and Benefits of Resistive Pre-Heating of the Feedstock Wire Agnieszka Kisielewicz, Karthikeyan Thalavai Pandian, Daniel Sthen et al. · Metals | 13 Apr 2021 | 62 |
| 35 | Dual-processing by abrasive waterjet machining—A method for machining and surface modification of nickel-based superalloy Zhirong Liao, Irati Sanchez, Dongdong Xu et al. · Journal of Materials Processing Technology | 20 May 2020 | 61 |
| 36 | Effects of high-pressure cooling in the flank and rake faces of WC tool on the tool wear mechanism and process conditions in turning of alloy 718 Nageswaran Tamil Alagan, Philipp Hoier, Pavel Zeman et al. · Wear | Jun 2019 | 61 |
| 37 | EVOKE: A Value-Driven Concept Selection Method for Early System Design Marco Bertoni, Alessandro Bertoni, Ola Isaksson · Journal of Systems Science and Systems Engineering | 20 Dec 2016 | 56 |
| 38 | Influence of alpha-case layer on the low cycle fatigue properties of Ti-6Al-2Sn-4Zr-2Mo alloy Raghuveer Gaddam, Marta‐Lena Antti, Robert Pederson · Materials Science and Engineering A | 11 Feb 2014 | 55 |
| 39 | Inverse identification of flow stress in metal cutting process using Response Surface Methodology Amir Malakizadi, Stefan Cedergren, Ibrahim Sadik et al. · Simulation Modelling Practice and Theory | 23 Oct 2015 | 51 |
| 40 | First and Second Law Analysis of Future Aircraft Engines Tomas Grönstedt, Mohammad Irannezhad, Lei Xu et al. · Journal of Engineering for Gas Turbines and Power | 19 Oct 2013 | 47 |
| 41 | Precipitate evolution in the early stages of ageing in Inconel 718 investigated using small-angle x-ray scattering Martin Fisk, Joel Andersson, R. du Rietz et al. · Materials Science and Engineering A | 20 Jun 2014 | 47 |
| 42 | Random Forest Surrogate Models to Support Design Space Exploration in Aerospace Use-Case Siva Krishna Dasari, Abbas Cheddad, Petter Andersson · IFIP advances in information and communication technology | 2019 | 46 |
| 43 | Microstructural examination of shear localisation during high strain rate deformation of Alloy 718 Joakim F. Johansson, Christer Persson, Haiping Lai et al. · Materials Science and Engineering A | 18 Mar 2016 | 46 |
| 44 | Effect of a Combined Hot-Streak and Swirl Profile on Cooled 1.5-Stage Turbine Aerodynamics: An Experimental and Computational Study Maxwell G. Adams, Paul F. Beard, Mark R. Stokes et al. · Journal of Turbomachinery | 13 Nov 2020 | 45 |
| 45 | Resistance based iterative learning control of additive manufacturing with wire Petter Hagqvist, Almir Heralić, Anna‐Karin Christiansson et al. · Mechatronics | 11 Apr 2015 | 45 |
| 46 | Enhancement in creep resistance of Ti–6Al–4V alloy due to boron addition Gaurav Singh, D.V.V. Satyanarayana, Robert Pederson et al. · Materials Science and Engineering A | 4 Jan 2014 | 45 |
| 47 | Liquid Feedstock Plasma Spraying: An Emerging Process for Advanced Thermal Barrier Coatings Nicolaie Markocsan, Mohit Kumar Gupta, Shrikant Vishwanath Joshi et al. · Journal of Thermal Spray Technology | 15 May 2017 | 42 |
| 48 | Sliding wear behavior of a sustainable Fe-based coating and its damage mechanisms Satyapal Mahade, Samuel Ayowole Awe, Stefan Björklund et al. · Wear | 5 May 2022 | 41 |
| 49 | Microstructural characteristics of Alloy 718 and Waspaloy and their influence on flank wear during turning Philipp Hoier, Amir Malakizadi, Pietro Stuppa et al. · Wear | 2 Feb 2018 | 41 |
| 50 | An integrated approach to technology platform and product platform development Christoffer Levandowski, Daniel Corin-Stig, Dag Henrik Bergsjö et al. · Concurrent Engineering | 12 Dec 2012 | 41 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.