Institution · IHI Corporation (Czechia)
Most cited papers from IHI Corporation (Czechia)
What are the most cited papers from IHI Corporation (Czechia)?
The most cited paper from IHI Corporation (Czechia) is "Flame stabilization and emission of small Swiss-roll combustors as heaters" (Nam Il Kim, Shungo Kato, Takuya Kataoka et al., 2005), with 275 citations. Next come "Development and scale effects of small Swiss-roll combustors" (163) and "Microdosimetric Approach to NIRS-defined Biological Dose Measurement for Carbon-ion Treatment Beam" (59).
Showing 50 of 60 papers. Every paper with more than 11 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Flame stabilization and emission of small Swiss-roll combustors as heaters Nam Il Kim, Shungo Kato, Takuya Kataoka et al. · Combustion and Flame | 10 Feb 2005 | 275 |
| 2 | Development and scale effects of small Swiss-roll combustors Nam Il Kim, Satoshi Aizumi, Takeshi Yokomori et al. · Proceedings of the Combustion Institute | 19 Sep 2006 | 163 |
| 3 | Microdosimetric Approach to NIRS-defined Biological Dose Measurement for Carbon-ion Treatment Beam Yuki Kase, Tatsuaki Kanai, Makoto Sakama et al. · Journal of Radiation Research | 13 Dec 2010 | 59 |
| 4 | Ignition Characteristics of Plasma Torch for Hydrogen Jet in an Airstream Kenichi Takita, Tomokazu Uemoto, Takahiro Sato et al. · Journal of Propulsion and Power | Mar 2000 | 56 |
| 5 | Second-order cone programming with warm start for elastoplastic analysis with von Mises yield criterion Kazuo Yonekura, Yoshihiro Kanno · Optimization and Engineering | 17 Jun 2011 | 51 |
| 6 | Effects of dilution by aromatic hydrocarbons on staged ignition behavior of n-decane droplets Osamu Moriue, Christian Eigenbrod, H. J. Rath et al. · Proceedings of the Combustion Institute | 2000 | 50 |
| 7 | Friction Lap Joining of Thermoplastic Materials to Carbon Steel Kimiaki Nagatsuka, Daiki Kitagawa, Hiroto Yamaoka et al. · ISIJ International | 2016 | 46 |
| 8 | A new LMI approach to analysis of linear systems with scheduling parameter reduction to finite number of LMI conditions Ryo Watanabe, Kenetsu Uchida, Masayuki Fujita | 24 Dec 2002 | 42 |
| 9 | Experimental Study of Slat Noise from 30P30N Three-Element High-Lift Airfoil in JAXA Kevlar-Wall Low-Speed Wind Tunnel Mitsuhiro Murayama, Yuzuru Yokokawa, Hiroki Ura et al. | 24 Jun 2018 | 41 |
| 10 | Numerical Analysis of the Influence of the Tip Clearance Flows on the Unsteady Cavitating Flows in a Three-Dimensional Inducer Kohei Okita, Hiroki Ugajin, Yoichiro Matsumoto · Journal of Hydrodynamics | Feb 2009 | 41 |
| 11 | Superconductivity in (Ca, Na)2CaCu2O4Cl2 The new simplest double-layer cuprate with apical chlorine Yuji Zenitani, Kazunori Inari, S. Sahoda et al. · Physica C Superconductivity | Jun 1995 | 40 |
| 12 | Ablative Impulse Characteristics of Polyacetal with Repetitive CO2 Laser Pulses Koji Suzuki, Keisuke Sawada, Ryota Takaya et al. · Journal of Propulsion and Power | 26 Jun 2008 | 34 |
| 13 | Hall Thruster Development for Japanese Space Propulsion Programs Yushi Hamada, Junhwi Bak, Rei Kawashima et al. · TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES | 2017 | 29 |
| 14 | Validation of Wireless Power Transfer up to 11kW Based on SAE J2954 with Bench and Vehicle Testing Jesse Schneider, Richard Barney Carlson, Jonathan Sirota et al. · SAE technical papers on CD-ROM/SAE technical paper series | 2 Apr 2019 | 27 |
| 15 | Task-oriented force control of parallel link robot for the assembly of segments of a shield tunnel excavation system Kazuhiro Kosuge, Koji Takeo, D. Taguchi et al. · IEEE/ASME Transactions on Mechatronics | 1996 | 27 |
| 16 | A concept for the EQ coating system for nickel-based superalloys Kyoko Hashi Kawagishi, Akihiro Sato, Hiroshi Harada · JOM | Jul 2008 | 25 |
| 17 | EXPERIMENTAL AND NUMERICAL STUDIES OF SLOSHING IN LIQUID CARGO TANKS WITH INTERNAL STRUCTURES Makoto R. Arai · IHI engineering review | Apr 1986 | 24 |
| 18 | Creep Strain Analysis of Austenitic Stainless Steel by SEM/EBSD Keiji Kubushiro, Yohei Sakakibara, Toshihiro OHTANI · Journal of the Society of Materials Science Japan | 2015 | 23 |
| 19 | Combustion of single droplets and droplet pairs in a vibrating field under microgravity Keiichi Okai, Osamu Moriue, Manabu Araki et al. · Proceedings of the Combustion Institute | 2000 | 23 |
| 20 | Proposal of experimental setup on boiling two-phase flow on-orbit experiments onboard Japanese experiment module "KIBO" Soumei Baba, Takashi Sakai, Kenichiro Sawada et al. · Journal of Physics Conference Series | 6 Dec 2011 | 22 |
| 21 | Fuel Pump System Configuration for the More Electric Engine Noriko Morioka, Hitoshi Oyori · SAE technical papers on CD-ROM/SAE technical paper series | 13 Oct 2011 | 20 |
| 22 | Effect of Initial Microstructure on Creep Strength of ASME Grade T91 Steel Kota Sawada, Kaoru Sekido, Kazuhiro Kimura et al. · ISIJ International | 10 Oct 2019 | 19 |
| 23 | Dynamic Stability Testing of a Reentry Lifting Capsule in a Transonic Wind Tunnel Seigo Koga, Akiko Hidaka, Rie Tagai et al. · 52nd Aerospace Sciences Meeting | 10 Jan 2014 | 19 |
| 24 | A chondrule-like object captured by space-exposed aerogel on the international space station Taka-aki K. Noguchi, Tomoki Nakamura, T. Ushikubo et al. · Earth and Planetary Science Letters | 3 Aug 2011 | 19 |
| 25 | Numerical Study of NOx Emission in High Temperature Air Combustion. Hongsheng Guo, Yiguang Ju, Kaoru Maruta et al. · JSME International Journal Series B | 1998 | 19 |
| 26 | Design of an Axial Flux Inductor Type Synchronous Motor With the Liquid Nitrogen Cooled Field and Armature HTS Windings H. Sugimoto, Toshiharu Tsuda, Takashi Morishita et al. · IEEE Transactions on Applied Superconductivity | Jun 2007 | 18 |
| 27 | Development of co-firing technology of pulverized coal and ammonia for suppressing the NOx generation Hiroki ISHII, Emi Ohno, Takahiro Kozaki et al. · Transactions of the JSME (in Japanese) | 2020 | 17 |
| 28 | An analytical and experimental study on the thickness effect of fatigue strength in large-scale-welded models Norio Yamamoto, Masashi MOURI, Tetsuo Okada et al. · Welding in the World | 11 Mar 2014 | 17 |
| 29 | Functional Assessment of Laser Arc Hybrid Welded Joints and Their Application for Bridge Construction Koutarou INOSE, Katsura Owaki, Junko Kanbayashi et al. · Welding in the World | Jul 2012 | 16 |
| 30 | Experimental study on autoignition in a scramjet combustor Yukinori Sato, Masami Sayama, Goro Masuya et al. · Journal of Propulsion and Power | Sep 1991 | 16 |
| 31 | Counter-driver shock tube Takahiro Tamba, The M. Nguyen, Kei Takeya et al. · Shock Waves | Sep 2015 | 16 |
| 32 | Linear Friction Welding of IN718 to Ti6Al4V Priti Wanjara, Javad Gholipour, Kosuke Watanabe et al. · Materials science forum | 15 Nov 2016 | 15 |
| 33 | Experimental Study on CO2 Solubility in Aqueous Piperazine/Alkanolamines Solutions at Stripper Conditions Shota Inoue, Takuya Itakura, Takao Nakagaki et al. · Energy Procedia | 2013 | 15 |
| 34 | CFD Modeling Coupled with Electric Field Analysis for Joule-Heated Glass Melters Shinsuke Matsuno, Yoshiyuki Iso, Hiroyuki Uchida et al. · Journal of Power and Energy Systems | 2008 | 15 |
| 35 | R&D Status of RFC Technology for SPF Airship in Japan Shunichi Okaya | 14 Jun 2011 | 15 |
| 36 | Numerical simulation of damage progression and fracture in structures made of 3D woven ceramic matrix composites Ryo Higuchi, Tomonaga Okabe, Yasuhiro Ohtake et al. · Advanced Composite Materials | 24 Aug 2015 | 15 |
| 37 | Dissimilar materials joining between stainless steel and carbon fiber reinforced thermoplastic by friction lap joining Tsuyoshi MIWA, Daiki Kitagawa, Kimiaki Nagatsuka et al. · QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY | 2017 | 14 |
| 38 | Large-Eddy Simulation of High-Subsonic Jet Flow with Microjet Injection Shunji Enomoto, Kazuomi Yamamoto, Kenshi Yamashita et al. | 5 Jun 2011 | 14 |
| 39 | Power Management System for the Electric Taxiing System Incorporating the More Electric Architecture Hitoshi Oyori, Noriko Morioka · SAE technical papers on CD-ROM/SAE technical paper series | 17 Sep 2013 | 14 |
| 40 | Difference between ASTM E1290 and BS 7448 CTOD Estimation Procedures Tetsuya Tagawa, Yoichi Kayamori, Mitsuru Ohata et al. · Welding in the World | Jul 2010 | 14 |
| 41 | Application of Elastic Wedge for Vibration Damping of Turbine Blade Jose Javier Bayod · Journal of System Design and Dynamics | 2011 | 14 |
| 42 | Investigation of Standardizing for Evaluation Method of Transverse Varestraint Test Kota Kadoi, Shigetaka OKANO, Shotaro Yamashita et al. · QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY | 2019 | 13 |
| 43 | Development Status of a Hydrazine Alternative and Low- cost Thruster Using HAN-HN Based Green propellant Shinji Igarashi, Y. Matsuura · 53rd AIAA/SAE/ASEE Joint Propulsion Conference | 7 Jul 2017 | 13 |
| 44 | High-Temperature Shape Memory Alloys Based on Ti-Platinum Group Metals Compounds Yoko Yamabe‐Mitarai, Abdul Wadood, Raju Arockiakumar et al. · Materials science forum | 23 May 2014 | 13 |
| 45 | Spray cooling characteristics of water and FC-72 under reduced and elevated gravity for space application Kitaru Sone, Ken-ichi Yoshida, Takahiro Oka et al. | 24 Dec 2002 | 13 |
| 46 | 13C-NMR Study of Acid Dissociation Constant (pKa) Effects on the CO2 Absorption and Regeneration of Aqueous Tertiary Alkanolamines Kogoro Hayashi, Yukio Furukawa, Hiroshi Satō et al. · Energy Procedia | 2014 | 13 |
| 47 | A Motor Control Design for the More Electric Aero Engine Fuel System Hitoshi Oyori, Noriko Morioka, Manabu Seta et al. · SAE technical papers on CD-ROM/SAE technical paper series | 13 Oct 2011 | 13 |
| 48 | Predicting Positioning Error and Finding Features for Large Industrial Robots Based on Deep Learning Daiki Kato, Kenya Yoshitsugu, Toshiki HIROGAKI et al. · International Journal of Automation Technology | 4 Mar 2021 | 12 |
| 49 | Evaluation of Harpoon Tips for Debris Capture Takahiko MATAKI, Yasuhiro Akahoshi, Takao Koura et al. · TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES AEROSPACE TECHNOLOGY JAPAN | 2016 | 12 |
| 50 | Multi Objective Optimization of a Supersonic Axial Turbine Blade Row Shape for Rocket Engine Turbopump Kaname Kawatsu, Naoki Tani, Mitsuru Shimagaki et al. | 31 Jul 2011 | 12 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.