Science Explorer Back to mapMap

Most cited papers from Łukasiewicz - Institute for Sustainable Technologies

Łukasiewicz - Institute for Sustainable Technologies

What are the most cited papers from Łukasiewicz - Institute for Sustainable Technologies?

The most cited paper from Łukasiewicz - Institute for Sustainable Technologies is "Effect of CuO and Al 2 O 3 nanoparticle additives on the tribological behavior of fully formulated oils" (Laura Peña-Parás, Jaime Taha‐Tijerina, Lorena Garza et al., 2015), with 201 citations. Next come "Failure and deformation mechanisms during indentation in nanostructured Cr/CrN multilayer coatings" (134) and "Impact of pyrolysis process conditions on the structure of biochar obtained from apple waste" (119).

Showing 50 of 61 papers. Every paper with more than 21 citations is listed.

Most cited papers, sortable by citations and release date
#Paper
1 Effect of CuO and Al 2 O 3 nanoparticle additives on the tribological behavior of fully formulated oils Laura Peña-Parás, Jaime Taha‐Tijerina, Lorena Garza et al. · Wear May 2015 201
2 Failure and deformation mechanisms during indentation in nanostructured Cr/CrN multilayer coatings Piotr Wieciński, Jerzy Smolik, Halina Garbacz et al. · Surface and Coatings Technology 18 Dec 2013 134
3 Impact of pyrolysis process conditions on the structure of biochar obtained from apple waste Wioletta Barszcz, Monika Łożyńska, Jarosław MOLENDA · Scientific Reports Open access 7 May 2024 119
4 Influence of the nitrogen pressure on the structure and properties of (Ti,Al)N coatings deposited by cathodic vacuum arc PVD process Jan Bujak, Jan Walkowicz, Jan P. Kusinski · Surface and Coatings Technology 19 Dec 2003 92
5 Erosion resistance of the nanostructured Cr/CrN multilayer coatings on Ti6Al4V alloy Piotr Wieciński, Jerzy Smolik, Halina Garbacz et al. · Vacuum 14 Mar 2014 84
6 Microstructure and mechanical properties of nanostructure multilayer CrN/Cr coatings on titanium alloy Piotr Wieciński, Jerzy Smolik, Halina Garbacz et al. · Thin Solid Films 23 Jan 2011 70
7 Synergisms and antagonisms between MoS2 nanotubes and representative oil additives under various contact conditions Agnieszka Maria Tomala, Manel Rodríguez Ripoll, Janez Kogovšek et al. · Tribology International Open access 10 Aug 2018 67
8 Influence of the structure of the composite: ‘nitrided layer/PVD coating’ on the durability of tools for hot working Jerzy Smolik, Jan Walkowicz, Jan Tacikowski · Surface and Coatings Technology Mar 2000 66
9 Influence of different pyrolysis temperatures on chemical composition and graphite-like structure of biochar produced from biomass of green microalgae Chlorella sp Monika Makowska, Karolina Dziosa · Environmental Technology & Innovation Open access 11 May 2024 63
10 Influence of the structure of the composite: ‘nitrided layer/PVD coating’ on the durability of forging dies made of steel DIN-1.2367 Jerzy Smolik, Michael Gulde, Jan Walkowicz et al. · Surface and Coatings Technology Mar 2004 62
11 Microstructure and properties of metal/ceramic and ceramic/ceramic multilayer coatings on titanium alloy Ti6Al4V Piotr Wieciński, Jerzy Smolik, Halina Garbacz et al. · Surface and Coatings Technology 3 Nov 2016 59
12 The lubricant-coating interaction in rolling and sliding contacts Remigiusz Michalczewski, W. Piekoszewski, M. Szczerek et al. · Tribology International 21 Jun 2008 52
13 Characterization of the surface layers formed on titanium by plasma electrolytic oxidation Danuta Krupa, Jacek Baszkiewicz, Joanna Zdunek et al. · Surface and Coatings Technology 25 May 2010 52
14 Effect of ageing automotive gear oils on scuffing and pitting Waldemar Tuszynski, Remigiusz Michalczewski, W. Piekoszewski et al. · Tribology International 16 Apr 2008 50
15 Technology Transfer Barriers and Challenges Faced by R&D Organisations A. Mazurkiewicz, Beata Poteralska · Procedia Engineering Conference paperOpen access 2017 47
16 Growth of ZnO nanowires on polypropylene membrane surface—Characterization and reactivity Marta Bojarska, Bartosz Nowak, J. M. Skowroński et al. · Applied Surface Science 29 Apr 2016 44
17 How do companies envisage the future? Functional foresight approaches Anna Kononiuk, Anna Sacio-Szymańska, Judit Gáspár · Engineering Management in Production and Services Open access 20 Dec 2017 42
18 The surface texture and its influence on the tribological characteristics of a friction pair: metal–polymer Magdalena Niemczewska-Wójcik, W. Piekoszewski · Archives of Civil and Mechanical Engineering 15 Dec 2016 42
19 A new scuffing shock test method for the determination of the resistance to scuffing of coated gears Waldemar Tuszynski, Remigiusz Michalczewski, M. Szczerek et al. · Archives of Civil and Mechanical Engineering 22 Aug 2012 42
20 Tribological and corrosion testing of surface engineered surgical grade CoCrMo alloy Javier A. Ortega, Marco A. L. Hernandez-Rodriguez, V. Ventura-Sobrevilla et al. · Wear Jul 2011 42
21 Spectroscopic Methods in the Evaluation of Modified Vegetable Base Oils from Crambe abyssinica Michał Szmatoła, Justyna Chrobak, Rafał Grabowski et al. · Molecules Open access 7 Dec 2018 39
22 Duplex surface treatment of moulds for pressure casting of aluminium Jan Walkowicz, Jerzy Smolik, Krzysztof Miernik et al. · Surface and Coatings Technology Dec 1997 38
23 Laser surface treatment and the resultant hierarchical topography of Ti grade 2 for biomedical application Donata Kuczyńska-Zemła, P. Kwaśniak, Jan Andrzej Marczak et al. · Applied Surface Science 26 Aug 2016 37
24 Effect of plasma electrolytic oxidation in the solutions containing Ca, P, Si, Na on the properties of titanium Danuta Krupa, Jacek Baszkiewicz, Joanna Zdunek et al. · Journal of Biomedical Materials Research Part B Applied Biomaterials 9 Aug 2012 37
25 Effects of surface texturing and kind of lubricant on the coefficient of friction at ambient and elevated temperatures Sławomir Woś, Waldemar Koszela, Paweł Pawlus et al. · Tribology International 4 Sep 2017 36
26 A Novel Reactor for Microwave Hydrothermal Scale-up Nanopowder Synthesis A. Majcher, Jan Wiejak, Jan Przybylski et al. · International Journal of Chemical Reactor Engineering 5 Jul 2013 36
27 Effects of ethyl-tert-butyl ether (ETBE) addition on the physicochemical properties of diesel oil and particulate matter and smoke emissions from diesel engines Krzysztof Górski, Asok K. Sen, W. Lotko et al. · Fuel 16 Sep 2012 36
28 Optimization of nitrided case structure in composite layers created by duplex treatment on the basis of PVD coating adhesion measurement Jan Walkowicz, Jerzy Smolik, Jan Tacikowski · Surface and Coatings Technology Sep 1999 35
29 In situ tribochemical sulfurization of molybdenum oxide nanotubes Manel Rodríguez Ripoll, Agnieszka Maria Tomala, Christoph Gabler et al. · Nanoscale Open access 2018 33
30 Analysis of the wear of forging tools surface layer after hybrid surface treatment Marek Robert Hawryluk, Zbigniew GRONOSTAJSKI, Marcin Kaszuba et al. · International Journal of Machine Tools and Manufacture 23 Dec 2016 33
31 The effect of random surface topography height on fretting in dry gross slip conditions Paweł Pawlus, Remigiusz Michalczewski, Agnieszka Lenart et al. · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology 9 Jun 2014 33
32 Scuffing and rolling contact fatigue resistance of discrete laser spot hardened austempered ductile iron Ann Zammit, Stephen Abela, John Charles Betts et al. · Wear 14 Jan 2019 32
33 The adsorption of chromium (III) ions from water solutions on biocarbons obtained from plant waste Bernadetta Kaźmierczak, Jarosław MOLENDA, M. Swat · Environmental Technology & Innovation Open access 29 Jun 2021 31
34 In-Situ Formation of MoS2 and WS2 Tribofilms by the Synergy Between Transition Metal Oxide Nanoparticles and Sulphur-Containing Oil Additives Manel Rodríguez Ripoll, Agnieszka Maria Tomala, Luka Pirker et al. · Tribology Letters 13 Feb 2020 31
35 High-Energy-Low-Temperature Technologies for the Synthesis of Nanoparticles: Microwaves and High Pressure Witold Łojkowski, Cristina Leonelli, Tadeusz Chudoba et al. · Inorganics Open access 6 Nov 2014 31
36 Evaluation of technology foresight projects Beata Poteralska, Anna Sacio-Szymańska · European Journal of Futures Research Open access 23 Nov 2013 31
37 The Effect of a Gear Oil on Abrasion, Scuffing, and Pitting of the DLC-Coated 18CrNiMo7-6 Steel Remigiusz Michalczewski, Marek Kalbarczyk, Anita MAŃKOWSKA-SNOPCZYŃSKA et al. · Coatings Open access 20 Dec 2018 29
38 Designing Lubricating Properties of Vegetable Base Oils Jolanta Iłowska, Justyna Chrobak, Rafał Grabowski et al. · Molecules Open access 14 Aug 2018 29
39 Influence of the application of a PN+Cr/CrN hybrid layer on the improvement of the lifetime of hot forging tools Marek Robert Hawryluk, Zbigniew GRONOSTAJSKI, Paweł Widomski et al. · Journal of Materials Processing Technology 6 Apr 2018 29
40 The Innovative Directions In Development And Implementations Of Hybrid Technologies In Surface Engineering A. Mazurkiewicz, Jerzy Smolik · Archives of Metallurgy and Materials Open access Sep 2015 29
41 Design and performance of the microdroplet filtering system used in cathodic arc coating deposition Krzysztof Miernik, Jan Walkowicz, Jan Bujak · Plasmas & Ions 2000 29
42 Anti-wear properties of Ti(C,N) layers deposited by the vacuum arc method Jan Walkowicz, Jerzy Smolik, Krzysztof Miernik et al. · Surface and Coatings Technology Jun 1996 29
43 Corrosion-resistant composite titanium nitride layers produced on the AZ91D magnesium alloy by a hybrid method M. Tacikowski, M. Banaszek, Jerzy Smolik · Vacuum 10 Jul 2013 29
44 Performance of nanolubricants containing MoS2 nanotubes during form tapping of zinc-coated automotive components Manel Rodríguez Ripoll, Agnieszka Maria Tomala, Vladimir Totolin et al. · Journal of Manufacturing Processes Open access 26 Feb 2019 28
45 Identifying and modelling changes in chemical properties of engine oils by use of infrared spectroscopy Artur Wolak, Jarosław MOLENDA, Grzegorz Zając et al. · Measurement Open access 16 Sep 2021 27
46 Study of clean combustion of wood in a stove-fireplace with accumulation Krzysztof Sornek, Mariusz Filipowicz, Kamila Rzepka · Journal of the Energy Institute 10 May 2016 27
47 Characterization and properties of low-friction, multilayered Cr-doped diamond-like carbon coatings prepared by pulse biased filtered cathodic arc deposition Jan Bujak, Remigiusz Michalczewski · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology 18 Jul 2011 27
48 Designing Mini-Games as Micro-Learning Resources for Professional Development in Multi-Cultural Organisations Sylvester Arnab, Ludmiła Walaszczyk, Mark T. Lewis et al. · The Electronic Journal of e-Learning Open access 21 Apr 2021 26
49 Osmosis Phenomena Based Degumming of Bast Fibrous Plants as a Promising Method in Primary Processing Wanda Konczewicz, Natalia Kryszak, Nowaczkiewicz Ewa et al. · Molecular Crystals and Liquid Crystals Open access 2013 26
50 Investigation of adhesion between component layers of a multi-layer coating TiC/Ti(Cx, N1−x)/TiN by the scratch-test method Jerzy Smolik, Krzysztof Zdunek, B. Larisch · Vacuum Oct 1999 26

Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.